concrete pump used for sale

Manufacturer: Kopperschmidt, Type: DC 15.50, Year: 1984, Transmission ratio: 15:1, Compressed air bar max: 120, Förderleistung l/min: 27, Druckluft max bar: 8, FREE TEXT: geprüft auf Funktion, Year :1984

Single-stage side channel pump, oil pump, coolant pump LUKRA PUMPS, LUTZ KRACHT SS13 flow rate: 20 l/min motor : 0.25 kW 220 - 250 / 380 - 440 V IP 44 used, tested ! Dimensions: 210 x 150 x 230 mm

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

Equipment: -Bypass - On / Off - Forward / Backward - 2 speeds - With mechanical dimmer - Connections Friedrich No. 2 DN 40 - In operating condition

Submersible Pump, Coolant Pump SCHMALENBERGER Z 25-13 Immersion Depth: 320 mm Pump Foot: Ø 240 mm Pump Flange: 300 x 300 mm Q: 9 m3/h H: 10 m Motor: 0.0.000 mmbr /br /Q: 9 m3/hbr /br /H: 10 mbr /br /Motor: 0.10 m3/hbr /br / 75 KW 220 - 240 / 380 - 420 V used, tested ! Dimensions: 680 x 300 x 300 mm

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

Submersible Pump, Coolant Pump SCHMALENBERGER Z 25-13 Immersion Depth: 380 mm Pump Foot: Ø 240 mm Pump Flange: 300 x 300 mm Q: 9 m3/h H: 19 m Motor: 1,1,000 mmbr /br /Q: 9 m3/hbr /br /H: 19 mbr /br /Motor: 1,1,000 mmbr /br / 1 KW 220 - 242 / 380 - 420 V used, tested ! Dimensions: 1020 x 300 x 300 mm

Gear Pump, Transfer Pump with Motor and Filter WMW, ORSTA A20-25-63 VS Pump: AC 1,6 TGL 17-747407 Qmax: 1.6 l/min pmax: 6.3 bar engine: Type 1260.1/1 0.06 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 460 x 250 x 170 mm

Centrifugal Pump, Water Pump BOLDROCCHI impeller: Ø 150 mm Flange diameter(inlet and outlet): Ø 258 mm Pipe diameter(inlet and output): Ø 123 mm motor: 96/90 1,1,1,000 5 KW (2 HP) 380 V 3AC 1400 rpm New !' Dimension 560 x 430 x 360 mm

Agilent G 1310 A Isocratic HPLC Pump Flow Range 0.001-10 ml/min

Submersible Pump, Coolant Pump SCHMALENBERGER THK 12 32-08/2 Immersion Depth: 240 mm Pump Foot: Ø 145mm Pump Flange: Ø 180 mm Q: 4,4,00 mmbr / 8 m3/h P: 10.8 bar Pipe connection: 1 1/4 inch ( female thread ) Motor: ATB CAF 100L/2C-11 4 KW 2860 rpm 400 V 3AC IP54 New ! Dimensions: 890 x 240 x 255 mm

Chemical pumping station PAGUS plastic cabinet 700 x 830 x 1590 mm air diaphragm pump ALMATEC AC-E 10 Operating pressure: max 10 bar cabinet almost metal-free ! Dimensions: 700 x 830 x 1590 mm

Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW

Coolant tank with pump ERNAULT-TOYODA 250 liters (e.g. b. for Ernault-Toyoda HES52) pump 120 l/min 3.5 bar 1.1 kW 220 / 380 V used, tested ! Dimensions: 1400 x 1100 x 750 mm

Pump module to add to VERTIwrap machines for filling liquids (milk, juices, water, etc.). - Specifications depending on customers product (product sample necessary). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Dosing pump with tank and mixer, chemical pump SERA M412S0 diaphragm pump max. 3 bar 0 - 500 l/h motor: 0.0.00 37 kW 220 / 415 V Mixer: TMR AMS 018/8 Motor: 0.18 kW 670 rpm 230 / 400 V Tank: 230 l stainless steel ! used ! Dimensions: 550 x 670 x 630 mm

The Bosch Rexroth AA4VG71EP4D1/32R-NSF52F011DP-S (R902232818) is a high-pressure axial piston pump designed for closed circuit applications. This particular model features an integrated boost pump that serves the dual purpose of providing boost and pilot oil supply, ensuring consistent and reliable performance. The swashplate design allows for the smooth change of flow direction as it moves through the neutral position, which is essential for precise control in various applications. This pump is equipped with high-pressure relief valves that incorporate a boost function, enhancing its safety and efficiency. Additionally, it comes with an adjustable pressure cutoff as standard, offering customization according to specific system requirements. The inclusion of a boost pressure relief valve further contributes to its operational safety. Bosch Rexroth has designed this model to be versatile, ...

Piston pump module for VFFS or HFFS machines for dosing liquids and paste-like products. Suitable for various viscous substances (e.g. lotions, creams, ointments) and liquids (milk, juices, water, etc.). Controlled by servo motor, including storage hopper and stirrer. - Specifications: dosing range: 100-1000ml | accuracy: +/- 0,5-1% | speed: 45 cycles/minute at 70ml dosing volume | hopper capacity: 70L | power supply and consumption: 3-phase, 380V, 1,5kW | dimensions and weight: depending on final layout. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full w ...

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Stock# U2443-3 Used twin screw pump by Bornemann type SLH 125-38. Contact parts stainless steel. Feeding inlet has diameter 80 mm, discharge outlet 65 mm. Pump has working output in range from 3 to 5.5 m3/h. Working rotation in range 328-468 rpm. Product viscosity up to 10000 cSt. Pump is driven by el motor 11 kW, 720 rpm, 380/660 V, 50 Hz. Feeding pressure up to 15,8 bar, suction pressure -0,20 bar. Self-priming pump in hygienic design. Mounted on stainless steel platform.

KSB Submersible Motor Pump with Water-Filled Motor Manufacturer: KSB Item number: 110 321 Type: BRZS 535 /1a Motor Type: 12 A 923 Operating voltage: 380/660 V Rated current: 191/111 A 92 kW Speed: 450 1/min Q: 250 m³/h H: 26 m IP: 58 Year of manufacture: unknown Length: approx. 2750 mm The pumps are unused stock goods and are delivered in the original KSB wooden freight crate. More pumps - new and used - can be found in our shop! International shipping costs on request!

Brand Metso Type Pump Model USHM 75 |180 w9Hc Chassis number 3013720100101,00 Year of construction 2011 Weight 0.5 ton Assets 11Kw Length mm 3200 Width mm 700 Height mm: 1100 Transport dimensions L x W x H 3.2 x .07 x 1.1 State machine Good Type of control Automatic Electrical connection 32A 5p Photos/film available: Yes

Rexroth Pump Axial Piston Pump AKP140R with Valve for ANGELS refurbished Type: AKP140R with valve Manufacturer Part Number: R901021899 Type code: SYDFEE-20/140R

Vertical Multistage High Pressure Centrifugal Pump KSBTyp Movichrom N CN 3/10 2RFabr. Nr 1-P30-837561Nominal flow rate max. 3 m3/hNominal delivery head 70 meters = 7 barNominal speed 2900 rpm. Motor power 1.5 kWNet connection 400 volts, 50 Hz- pump structure in 10 stages- pump elements made of stainless steel, pump base made of cast iron connection flanges DN 32- suitable for drinking water supply, irrigation and drainageSpace requirement pump L x W x H 250 x 220 x 830 mmWeight 38 kgUnused replacement pump made of

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Used Seawater Pump C32 / 3412

Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2

Wilo High Pressure Centrifugal Pump Economy MHIE 203N-2/V/3-2-2G,G1/G1,0.75kW 4171765

Manufacturer: Hidrostal Model: F10K-SST+F2310-L Pump Type: Screw centrifugal pump Material: Stainless Steel Find more here - .ucymachines/ Contact us at - sales@ucymachines

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

Stock number: PC2304, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 1,1 kW - 220/380 Volt - 2870 rpm., Theoretical capacity: 15000 l/h., Manufacturer: APV, Type: W+ 22/20 220 120

Danfoss 83024044 PUMP-VAR-DISPL HYDRAULIC PISTON PUMP Weight: 24.6 kg Availability: 1 P.max. - 350 bar Nobmy Exov D Hk Ej Ipocu REF/Serial Number: 026-67039-0 Part number: C5V08-311B1 Manufacturing site/service centre: 41564 KAARST Germany PTS ID/Tracking ID: VKU82E77 Unique Identifier

Stock number: P349, Item: Vacuum pump, In stock: Yes, Amount in stock: 1 pc., Motor: 1,1 kW - 380 Volt - 1390 rpm., Theoretical capacity: 30 m³/hour, Manufacturer: Pfeiffer, Type: Duo 030 A

Brand-new Sauer Danfoss 11028185 Hydraulic Pump—a high-performance, durable hydraulic component designed for industrial and mobile machinery applications. Model Code: JRR045BLS192 Serial No: S074826737 Max Pressure: Up to 350 bar (verify with specs) Country of Manufacture: Made in Slovakia Ideal for heavy equipment, construction, and hydraulic systems Model No./Ident No.: 11028185 Net weight: 29 kg Manufacturer: Sauer Danfoss Availability: 2 Ncobsv D H Evomy Ex Ipeu

Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30

Stock number: P348, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: High pressure pump, Construction: Mounted on stainless foundation with wheels, Motor: Variator gear - 3,0 kW - 350–1750 rpm., Manufacturer: Rannie, Type: 18.50, Other: Serial no. 4661/71

Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8

Stock number: P342, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Membrane pump, Manufacturer: Almatec, Type: A10, Other: Runs on compressed air

Stock number: PM2076, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Inlet: Flange L 350 x W 180 mm., Motor: 1,5 kW - 220/380 Volt - 186 rpm., Theoretical capacity: 1000 l/h., Manufacturer: Seepex, Type: BT 2-12, Other: Screw feeding

Stock number: P321, Material: Plastic, In stock: Yes, Amount in stock: 3 pcs., Item: Membrane pump, Connections: Ø 3/4, Theoretical capacity: 4800 l/h., Working pressure: Max 5,5 bar, Manufacturer: Albin, Type: AD0060PXT

Stock number: P320, In stock: Yes, Amount in stock: 6 pcs., Item: Dosage pump, Theoretical capacity: 12 l/h., Manufacturer: Grundfoss, Type: DME 12-6AP-PP

Stock number: P311, Material: Stainless steel, In stock: Yes, Amount in stock: 1 pc., Item: Barrel pump, Straw: Ø 40 x L 900 mm., Motor: 460 Watt - 220 volt - 9100 rpm. - Ex motor, Manufacturer: Lutz, Type: Niro 40

Stock number: P319, In stock: Yes, Amount in stock: 3 pcs., Item: Dosage pump, Theoretical capacity: 7,5 l/h., Manufacturer: Grundfoss, Type: DDA 7,5-16 FCM

Stock number: P285, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Barrel pump, Straw: Ø 33 mm. x L 3025 mm., Motor: 220/380 Volt - 18800 rpm.

Stock number: P290, Material: Plastic, In stock: Yes, Amount in stock: 2 pcs., Item: Membrane pump, Connections: Ø 1/2, Theoretical capacity: 1450 l/h., Working pressure: Max 4 bar, Manufacturer: ASTI, Type: PFD2 216

Stock number: P276, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Grease pump, Motor: Gear motor - 2,2 kW - 220/380 Volt - 110 rpm., Dimensions inlet: Ø 2½, Manufacturer: Kolding, Type: 2201

Stock number: P280, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Pump, Construction: Mounted on stainless foundation, Motor: 0,55 kW - 380 Volt - 1410 rpm., Theoretical capacity: Max 2500 l/h., Manufacturer: ABS/SIHI, Type: AKLA 1201

Stock number: P269, Material: PVC/Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Dosing pump, Motor: Ex motor - 0,18 kW - 220/380 Volt - 1330 rpm., Theoretical capacity: Variable - Max 24 l/h., Working pressure: Max 10 bar, Manufacturer: Grundfos Alldos, Type: DMH 24-10, B-PVC/V/G-X-44B1E1

Stock number: P237, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum pump, Construction: Mounted on painted frame with wheels, Motor: 1,5 kW - 220/380 Volt - 1420 rpm., Manufacturer: Sterling SIHI, Type: AKHK4101, Other: With motor shield

Stock number: P252, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Dosing pump, Motor: 0,18 kW - 220/380 Volt, Theoretical capacity: 0-5 l/h., Working pressure: Max 2 bar, Manufacturer: ProCam, Type: DS 15/50