concrete plant used for sale

Stainless steel mixer in 6m container. EKATO mixer EM 2060., 1bar, 25°C, 80-122 rpm Control Schoregge GmbH Complete with controller, scale, etc. Dimensions of the mixer: Diameter: 1.60m Height: 0.80m Volume: 1600 l

Wet cast concrete pipe production plant for sale • Fully automated factory designed and developed by Consmema/KTB • Fully complete set of machinery • In operation since 2016 in West Europe • Capacity up to 300 pipes per day in different sizes: 300- 1500mm • Very distinctive pipes: smoother, lighter and sawable • For sale because of strategical redirection of selling company Completely new way of manufacturing • Use of Self-Compacting Concrete (SCC) – wet cast • High degree of automation • Good and clean working conditions • Leading to high quality pipes and unique products • Easy to cut to suit with notches • Remaining part can be re-used, no waste material • No butt, spigot or socket pipes required • Inside pipe wall is smooth because of wet instead of dry concrete: better flow of (waste) water • More than 20% lighter and thinner th ...

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

ID3043 MAT SCC-20-K year/Year of construction 2006 2.8 t Injection mixing plant, batch size 300-1000 liters Injection mixing plant, batch size 300-1000 liters

ID2954 Niemeyer manhole finisher year/Year of construction 1996 Manhole finisher, with conveyor belt, vibrator, outlets, wall traverse, filling carriage, manhole inserts (worth approx. 23,500 euros), accessories Shaft ring paver, with feed belt, vibrator, outlets, wall traverse, filling trolley, shaft inserts (worth approx. 23,500 euros), accessories

ID2872 Putzmeister BSA1409 D5 year/Year of construction 2020 approx. 200 hours/hours Trailer concrete pump Diesel, ready for use Trailer Concrete Pump Diesel, Ready for Use

ID2652 Putzmeister HM25 AZ 24/100 year approx. 1995 approx. 1210 hours/hours Mobile Concrete pump Putzmeister HM25 AZ 24/100 on tracks (25 t Atlas undercarriage), approx. 24 m boom, radio remote control, wired remote control, approx. 60 -70 cbm pump capacity, Iveco/Fiat 6 cylinder suction engine Mobile concrete pump Putzmeister HM25 AZ 24/100 on tracked suspension (25 t Atlas undercarriage), approx. 24 m design, radio remote control, wired remote control, approx. 60 -70 cbm pumping capacity, Iveco/Fiat 6 cylinder naturally aspirated engine

One semi new ELECTROWELDING MESHLINE from PRECUT BAR, from Ø 4 mm up to Ø 16 mm diameter. Mainly exesting of: Line Wire Deposit Table SEmi automatic line wire feeder Welding machine with 2.500mm width Cross wire magazine Linear pulling out device Stacking unit for meshes up to 6.000mm of length

ID1855 Elba RSK 30C – Star Scraper year/Year of construction 1992 Elba Radialschrapp automat RS/M 40, 17,3 m, 4-part lattice boom for scrapers Elba RS/M 40 radial scraper machine, 17.3 m, 4-part lattice boom for scrapers

Capacity 2000 liter Elektromotor Type: F200KL02 Power: 40kW N: 2900 1/min

Hydraulically operated tilting vibration table for products up to 5 m. long. Type v20 vibrators max speed 6000rpm. Hydraulically operated beltfeeder. Hydraulically power packs. Pneumatically operated gates. PLC control system with monitor and memory for 100 different mould settings. Demoulding crane. Transport system consist of 2 lanes and 10 units of chain stands. PLC control system 70 steel pallets for a product area of 5000 x 1,125 mm and a load of 3500 kg. Amexpo Consult Merkurvej 31, 9370 Hals Denmark Mobile: +45 25291017.

Used multi-layer paver Zenit 844 Built in 1993 inclusive: 1 piece concrete mixer 750 l Teka 1 piece concrete mixer 500 l approx. 12 pieces of used moulds approx. 100 production pallets Used concrete multilayer machine Manufacturer: Zenith Type: 844 Year: 1993 including: - 1 pcs 750 liter mixer Teka - 1 pcs 500 liter blender - about 12 moulds - about 100 pcs production boards

used concrete block mould for the production of 30 paving stones 8cm

Used concrete block mould for the production of drywall blocks (tongue and groove system) The mould was used on a concrete block machine type Schlosser SV40.

Steel mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould has appropriate fittings and pressure plates and must be rebuilt accordingly for each step length. Step height 18cm, tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

Used concrete block mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould includes fitting parts and corresponding printing plates, which are built into the mould according to the step length to be produced. Step height 18cm. Step tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle

One used METAX cutting line from Peddinhaus for bars up to 40mm

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg

From insolvency: Wacker Neusson CT 36 Year of construction 2019 Four-stroke Honda GX 160 915mm working width 73kg net weight

A used ELBA scraper is offered. Type: RS/K70, Built in 1991. 13m boom, semi-automatic and fully automatic.

1 Gebr. Mat Cutting Machine Reinforced design up to single rod 12 mm Passage width 3 m Weight 645 kg

Description: Power supply: 230V, 50Hz Power: 2000W Vibration frequency: 260 - 283 Hz Mallet length: 6 m Poker diameter: 48 mm Electric drive Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 15 kg

Description: Power supply: 230V, 50Hz Power: 2000W Vibration frequency: 260 - 283 Hz Mallet length: 6 m Poker diameter: 48 mm Electric drive Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 15 kg

Description: Power supply: 230V, 50Hz Power: 2000W Vibration frequency: 260 - 283 Hz Mallet length: 6 m Poker diameter: 48 mm Electric drive Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 15 kg

A used concrete- /mortar mixing plant fully functional / ready for use including ORIGINAL DOCUMENTATION Manufacturer: WELZOW Type: BAB 500 Year of construction 1976 Output: 30m3/h Mixer: Pan mixer, Welzow, hardened concrete output 0.5 m3 aggrgate feeding by draigline scraper / WELZOW Dosage: Aggregates with skip weighing Cement by dosing hopper Water Control: WELZOW Silos 2 pieces AVAILABLE IMMEDIATELY LOCATION: EASTERN GERMANY Price on request Offers and prices are net ex location. Subject to prior sale, errors and/or misrepresentations reserved, without guarantee and/or warranty, sold in AS IT - IS IT condition - lying and/or standing

Paver, made Zenith 913, incl. 4 moulds for: - Hollow block 49/ 17.5 / 17.5 cm - Hollow block 30 / 24 / 17.5 cm - Hollow block 36/ 24/ 17.5 cm - Hollow block 36/ 24 / 23.8 cm The machine travels on triangular rails

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Description: • Concrete mixer truck • Spanish registration number: 3027 DBK • Frame number WJMJ3JRS00C132712 • IVECO CURSOR D-F3BE0681GB engine: 6 cylinders, displacement 12882 cc, power 280 KW • Maximum total weight 32000 kg, death weight 13972 kg • Mileage 399905 km according to the counter • BARYVAL ANN-10/01 concrete mixer: serial number 14665, capacity approx. 10 m³ • This vehicle is delivered with only one set of keys • Ownership change costs will be paid by the buyer • MOT certificate costs will be paid by the buyer • The buyer is responsible for passing MOT in order to circulate in Spain • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 9,600 x 2,500 x 3, ...

Description: MESSERSI P4-F4 Self-Loading Concrete Mixer Truck no. 212V/003 5.196 hours ,according to counter Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,560 mm, weight approx.: 3,500 kg

MAS 3a block making machine for paving blocks, hollow blocks and kerbstones. Board dimensions X/Y/Z: 1200mm/1100mm/50mm, production height min./max.: 50mm/330mm. 80x transport racks, 1700x base boards: dimensions X/Y/Z: 1200mm/1150mm/50mm. Bucket conveyor with Rekers drive and tipping drive: Bucket capacity: 1850l. 2000x pallets: Dimensions X/Y: 1000mm/1000mm. Forms: Concrete blocks: 36.5, 36.5 Z, 30, 24, 17.5, 11.5, 1.5 NF, NF. Expanded clay blocks: 36.5, 36.5 Z, 30.5, 24, 11.5. Lawn edgings: 5/25/100, 5/30/100. Kerbstones: 8/25/100, rectangular paving blocks: 10x10, 10x20, 20x20, 20x30, 30x30x8 cm, 20x20x8 cm without chamfer. Pavers: 6-8-10 H, 8er S, 6eck 7cm. Planting rings: small, large, oval (24x45x20). Special stones: lawn grids, filter stones. Including all accessories/conveyor belts etc. Documentation available. On-site inspection is possible.

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Bouwman Pharma Plant Isolator with freeze-drying system Isolators are the safest method to ensure sterile conditions. In insulators, an evaporator in conjunction with a distribution system takes over the automated decontamination. Year of construction 1991 Weighing System - Weighing Range: 20-6000 gr Abm. Inside: ± W160 x D150 x H110 cm Item condition: used

Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.

Complete LVL Plant Don't hesitate to keep in touch with us for further information.

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

We offer, as it is where it is Fruit juice concentrate plant Was running with Juices from Apple, sour Cherry Manufacturer: M&L design is done by ex Gea Wiegand Engineers and was sold through Bucher Still installed, ready to work, in maintained condition Year of manufacture: 1999 Type: Falling film Number of evaporation effects: 4 Water evaporation to/h: 12,7 Inclusive aroma column Combi evaporator, with 120°C pasteurizer Prior sales reserved

We offer, as it is where it is Fruit juice concentrate plant Was running with Juices from Apple, sour Cherry Manufacturer: Unipektin Still installed, ready to work, in maintained condition Year of manufacture: 1990 Type: Falling film Number of evaporation effects --> 5 Water Waterevaporation --> 9 to/h Inclusive aroma column Pre-evaporator Prior sales reserved

We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: Unipektin Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1990 Type: Falling Film Evaporator Number of levels: 5 Water evaporation per hour: 9 Including aroma column With pre-evaporator Subject to prior sale

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary m ...

Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler contains a durable, electronically controlled, water cooled moving grate which is designed to burn from wood pellets to wood chips and waste wood. The plant was installed in year 2012 and it has been running with wood pellets till December 2022. It is complete, good condition plant with concrete element building, two large pellet silos and a hot water accumulator tank for heat load balancing. These items will be optionally available for those who are interested in them. It has load controlled primary and secondary air combustion fans as well as speed-controlled exhaust gas fan which ensures high efficiency combustion and low electric power consumption. Two step combustion is designed for low NOx emissions. The durable triple layered ceramic and steel combustion chamber includes flexible dilation joints ...

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

<br>DO PAPER PRODUCTION WITH 2 PAPER FACTORIES & WAREHOUSE, STEINSCHLIFF M'HLE; BleachING, COATING, DEARKING, WATER TREATMENT USW.. <br><br>Still in operation: No<br>Verf Gbar: immediately

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Y&J:1984, 3 silos, 800 mm diameter x 1400 mm total height, with manhole lids, 3 vibration discharge floors; Inlet: 800 mm, outlet: 168 mm, height 570 mm, 1 suction filter with sack shake, filter area: 2.3 m2, 3 blow-through locks for conveyor system.

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

Earth tank, storage tank, steel tank - brand new for the storage of HEL with 50,000 litres capacity, according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. Dimensions: D = 2.50 m - L = approx. 10.80 m - weight approx. 9.3 tons. Incl. a walk-in dome shaft, multi-part, according to DIN 6626, height-adjustable from approx. 850 mm to 1,050 mm, as well as a walk-in cover, galvanized + tagwaterproof. Containers ex works, freely charged. Additional price for a navigable dome shaft according to DIN 6626 General: You will receive an invoice with VAT shown. The purchase is made on our general terms and conditions. Further tank systems (new and used) as well as rental systems are also on offer ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Capacity up to 500 kg/layer, working width 320 mm,