concrete mixin plant used for sale

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

ID2954 Niemeyer manhole finisher year/Year of construction 1996 Manhole finisher, with conveyor belt, vibrator, outlets, wall traverse, filling carriage, manhole inserts (worth approx. 23,500 euros), accessories Shaft ring paver, with feed belt, vibrator, outlets, wall traverse, filling trolley, shaft inserts (worth approx. 23,500 euros), accessories

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

TBL SREC 12 - residual concrete recycling plant - COMPLETE - with STETTER RA 12 Washing drum factory new 0.0 operating hours with guarantee including control unit including feeding table Includes 3 submersible pumps (1 piece submersible pump, for truck mixer washing pipe 2.2 kW, 1 submersible pump for returning the recycling water to the washing drum 2.2 kW, 1 submersible pump for draining the recycling water to the water dosing hopper of the concrete mixing plant 3 kW) Washing capacity for normal concrete 12 m3/h Washing capacity for normal mortar 5 m3/h max. particle size 63 mm Separation cut 0.2mm Rinse water volume (adjustable) 7-12 m3/h Rinse water connection for washing drum DN 50 Drain pipe DN 200 Water content of the drum (fill level) 2 m3 Washing drum follow-up time (adjustable) 20 min If required, including delivery, assembly and commissioning Pri ...

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Slipform paver- GOMACO GOMACO Commander III Concrete Road Paver For track construction, walkway, formwork, etc. Year of construction 2004 6800 h Workshop-Refurbished Screed as good as new Price from Saxony-Anhalt Net/export price 130.000,-- Euro

Italian made Mario Croci & Figli Concrete pipe machine. In great condition (the machine is new and it has never produced a single pipe). It is weather protected, placed in a dry warehouse. It produces 2 and 2.5m length pipes of D30 up to D120cm diameter. It comes with D300, D400, D500, D600 moulds along with rings. Located in Drama-Greece. Excellent bargain!

1 piece of used, technically overhauled reinforcing steel shears. The scissors work electromechanically. The engine was remounted. V-belt renewed. Machine painted. Cut is triggered by means of a footswitch on the front. Max. cutting capacity: 1 piece 32mm. D. Reinforcing steel bars. Connected load: 3KW/400V/16A

One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm

One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm

1984 Schlüsselbauer Magic 1211 Manufacturer Information: Name: Maschinenbau Schlüsselbauer Machine Details: Model: Schlüsselbauer Magic 1211 Year of Building : 1984 Voltage : 380 V Control Voltage : 24 V Connected Wattage : 50 kW Frequency : 50 Hz Weight Total : 16,000 kg Country of Manufacture: Made in Austria 1984 Ernst Wagner KG Reutlingen HGU 3000 Type: HGU 3000 Load capacity: 3,000 kg Year of construction: 11 / 1984 Weight without battery: 4,410 kg Weight with battery: 6,410 kg Battery weight: min 200 kg / max 200 kg Accessories included. Find more here - .ucymachines/ Contact us at - sales@ucymachines

used, technically overhauled cutting machine Peddinghaus Simplex 60 H Hydraulic hold-down. The cut is triggered by a footswitch with emergency stop function. The shears are electro-hydraulically driven. Connected load 11KW 400V/32A Max. cutting capacity 3 bars 28mm diameter reinforcing steel.

RAMATIK - Automatic machine for the production of concrete products on a concrete surface (track). Manufacturer - JOSEF RADINGER – Klagenfurt - Austria Year 2007 The machine is of Austrian origin. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 35 A. The weight of the machine without the model is approximately 5 tons. The machine operates via Hawe hydraulics and electromagnetic valves. The machine was last generally renovated in 2021 It is set via a touch monitor. touch. The program on the screen can be programmed in any language. The machine can be converted into a stable machine because it has an internal table with high-frequency vibrators. The machine includes two sets of vibrators and up to 10 metal molds (models) for concrete blocks, concrete corner blocks and external chimney blocks. The machine ...

SIMATIK - Automatic machine for the production of concrete products on a concrete surface (pista). The machine is of Austrian origin, about 30 years old. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 25 A. The weight of the machine without the model is approximately 4 tons. The machine operates via hydraulics and electromagnetic valves. The machine was last generally renovated in 2022. The complete electricity was replaced, so that the machine can now be operated automatically, semi-automatically or manually. It is set via a touch monitor. touch. The program on the screen can be programmed in any language. Some bearings and seals were also replaced, and the structure was also renovated. The machine includes two sets of Knauer vibrators and hydraulic tongs for palletizing or loading products. We also add fo ...

1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm

gebr. Cutting straightener Progress Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation

ID3680 Haarup Mixodatamat 1200/2000 year/Year of construction 1993 Slab press for 50mm slabs with backing concrete, with mixer, portioning, press, including steel pallets for picking the pressed slabs. Slab press for 50 slabs with back concrete, with mixer, portioning, press, incl. steel pallets for picking the pressed slabs

A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible.

Used, technically overhauled reinforcing steel shears. Footswitch with emergency stop function. Hydraulic counter holder Cutting capacity max.1 rod 45mm D. Power 11 KW.

Formwork tables/pallets Various formwork tables in different lengths Built in 1995 Very clean condition Location Göttingen Price: Freely loaded p. piece 3,000,-- euros + Added value. I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

ID3780 STS Scheltzke MS2-700 E-A-AUT year/Baujahr 2021 approx. 900 hours/hours Fully automatic mixing station, continuous twin-batch mixing plant, total batch capacity (mixers 1+2): 36 m³/h, total power consumption: approx. 30 kW Fully automatic mixing station, continuous double-batch mixing plant, total batch output (mixer 1+2): 36 cbm/h, total power consumption: approx. 30 KW

EQUIPMENT FOR GEOTECHNICAL AND ENVIRONMENTAL INVESTIGATIONS Original Gouda 20 ton static penetrometer for CPT tests, with mechanical tip and 50 operating rods mounted on Mercedes Benz Unimog Mod. U 404.0 Year 1972 Km 32.272, Mercedes-Benz 6 cyl. No. 130925 / 10 / 000070 DPSH heavy dynamic penetrometer for SCPT testing, hydraulic automatic release, vice with rod puller, 50 and 75 kg impact masses, with 15 rods Hydra Mini series portable hydraulic auger on wheels for surface environmental coring, with 250 kgm hydraulic gearbox and 1.00 m useful stroke

IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor dischar ...

Year of construction 2015 Operating hours: 7747 Straightening and cutting from wire coils Max. Production speed: 160m/min Wire diameter 8 - 20mm 6 wire diameters guided in parallel, Automatic and immediate selection of wire diameter Finished wire rod length: 500mm to 14000mm Rotor straightening system with hyperbolic straightening rollers (no damage to the wire surface) Fully automatic wire diameter change Shears for cutting to length 14-metre wire rod outlet and roller conveyor 6 driven reels, suitable for 5 tonne coils Beckhoff controller, network connection, online service

Mixer capacity: 1,500 litres (dry load) Concrete output: 1.0 m³ per batch Mixing drum diameter: 2,500 mm Application: Production of high-quality ready-mixed concrete PAS 1500 feed elevator consisting of: – the elevator frame for attachment to a Pemat mixer, standard inclination 60° – the elevator bucket with a capacity of 1,500 litres (max. 2,400 kg) Included – WÜRSCHUM additive scale – and mixer control unit

Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system

- OPA 1440ES-table rotation with pinion and gear, - - electric central with PLC SIEMENS S7, - hydraulic ejector with hooks, - second layer hopper FLEXA 240, - planetary doser STAR 625 - 8 holes, - plunging spreader VT2000/B with oscillation device, - sets of model for dimensions 40/40 for product thickness 3.8 cm. - All are manufactured in 9/2008.

Complete fully automatic concrete block production plant MASA / OMAG built in 96 / 2009 including mixing plant. More information, machine installation, pictures, layout on request.

Complete Concrete Block Production Plant Manufacturer Zeniht Type 860 Complete carousel system with lifting ladder, countersunk ladder, drying chamber, vehicle group with turntable, complete dry side packer Strapping equipment, underlay boards. Equipment parts can also be purchased individually. More information Machine list Pictures Price on request

Three nearly identical Eirich intensive concrete mixers are expected to be available from January 2027. Years of manufacture: 1974/1974/1984, Volume: 500l, Max. filling weight: 655kg, Mixing pan speed: 36rpm, Rotor speed: 130rpm, Rotor tool diameter: 880mm. Documentation available. An on-site inspection is possible.

KVM 62x105 Block/Paving Stone Machine, 2009. The machine is in very good condition and is still in production and can be seen after appointment. It has Face Mix (2 layers concrete) and comes with 3 moulds.

KVM 105x125 Block/Paving Stone Machine 2008. The machine is in very good condition, It is still in production and can be seen after appointment. It has face mix (2 layer concrete).

Paving stone finishing plant - shot blasting machine DISA type BT 125-188 - Beam hours 229 - Permissible document width 1250 mm - Permissible passage height 500 mm - Throughput speed 2-10 m/min - Wheel diameter 380 mm - incl. ventilation system

bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...

Without saw blade Auction-ID: A1-47168-201

Please note! Without saw blade. Completeness unknown Auction-ID: A1-47168-227

equipped with hose with coupling, Auction-ID: A1-47168-258

Auction-ID: A1-47168-66

Auction-ID: A1-47168-282

Drum capacity approximately: 150 litres Auction-ID: A1-47168-56

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-266

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-166

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-66

Tested for operation Auction-ID: A3-46147-6231

Tested for operation Auction-ID: A3-46147-6230

Oil-free & Brushless Ring Saw - Rated power: 5000w - constant RPM: 1800 rpm - Voltage AC220V - Max cutting size: 39 cm - Blade Diameter: 500 mm - nw: 11.5 kg Auction-ID: A1-40304-86

Includes storage box and saws. Auction-ID: A1-41279-460

Professional Beta Diamond Tools PIRANA floor saw for precise cutting of concrete, asphalt, floors and pavement. This robust saw is equipped with a reliable Honda GX390 petrol engine of 13 hp and is equipped with a diamond saw blade Ø500 mm. Thanks to the integrated water tank and water cooling, dust generation is limited and the saw blade remains optimally cooled during intensive use. Ideal for contractors, road construction, paving works and rental companies - functional - hardly used, always neatly indoors - Fuel: Petrol Engine speed: 3,600 rpm Saw blade diameter: Ø500 mm Maximum cutting depth: 180 mm Water cooling via integrated water tank Water tank capacity: 30 litres Serial Number: N.T0081 - Features: Infinitely adjustable cutting depth Robust steel construction Large transport wheels Ergonomic push handles Manual depth adjustment Suitable for dry and wet sawing (with water cooli ...

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-49372-360

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-49372-359