concrete mixin plant used for sale

Worm gear (small) Drawing no. 14240-546D1

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Collette SM200 high speed bowl mixers 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls

Product number: 1163 Mixer: 2AM1000L-92-08624 Speed: 2 speeds, 20/40RPM Power: 3 x 380V, 50Hz, 13kW Dimensions: 2400 x 1300 x 2950 mm Including lifter for 200L bins Meat pomp: 250-120V1700 Diameter screw: 250 mm Hopper: 1700 litres Dimensions: 1400 x 2500 x 2600 mm Including Baktec-matic water dosing Grinder: 300 mm hole plates Dimensions: 1200 x 800 x 2300 mm

Key data: 300 , 600

Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

Product number: 2896 Type: Battermix skid Serial number: INDK12660 Year of construction: 2018 Never used, new on pallet Mixing tank Tank: 1500 litres, double jacket Mixer: high speed, 965 RPM Power: 3 x 400V, 50Hz, 4.55kW Dimensions: 1400 x 1250 x 2650 mm With Packo Inox pump, level sensor, temperature sensor and CIP Buffer tank Tank: 1500 litres, double jacket Power: 3 x 400V, 50Hz, 2.05kW Dimensions: 1250 x 1250 x 2450 mm With Packo Inox pump, level sensor, temperature sensor and CIP Circulation tank Tank: 1500 litres, double jacket Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1250 x 1250 x 2450 mm With level sensor, temperature sensor and CIP Packo Inox circulation pup Type: FP2/32-160-552 Serial number: 176593 Year of construction: 2018 Capacity: 2 m³/h Flowmeter: Endress + Hauser Flowphant T DTT31 Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 450 x 800 x  ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

NIP adjustment screw Drawing No. 14204-1168D1

Gearbox TSA 031 370-1-07 Manufacturer VSS Kosice for mixing mill Buzuluk 660x2100 mm , Type 14821 for right side i = 10:1

Bull gear Drawing No. 14272 -161 C1 z = 113

Drive 210 kW / 985 rpm, 380 V, with starter

Mixing tub, mixing bowl, mixing trough -Bathtub depth: 470 mm -Contents: approx. 220 l -Corners: rounded -Internal dimensions: 800 x 610 x D 470 mm -External dimensions: 840/860/H640 mm -Weight: 32 kg

Covers for bull gear and friction wheels

Mixing vessel Total volume: 100 l speed-controlled agitator Speed 335-1920 rpm Engine 3000 rpm Lid outlet on the ground very high quality Dimensions LWH: 500 x 500 x 1800 mm Weight: approx. 150 kg

Mixing container 150 l Filling lid (diameter 200 mm) Propeller mixer 2.2 kW stable design Outlet with valve (milk pipe) Level detector high-quality workmanship (stainless steel V4A) Dimensions LWH: 700 x 700 x 1850 mm Weight: approx. 170 kg

7 mixing tanks Auction-ID: A7-45983-73

Mixing container 150 l with opening lid various lid openings with valve Exhaust fitting with milk tube valve Propeller agitator Speed: 1380/224 Power: 0.55 kW Dimensions LWH: 800 x 800 x 1800 mm Weight: approx. 150 kg

Manually operated Auction-ID: A1-43429-54

Manually operated Auction-ID: A1-43429-55

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + easy & fast installation & operation + Housing made entirely of stainless steel + can of course also be combined with an ice water system + Device automatically opens the required water supply, hot/cooled water + performs the right mixture until the desired temperature is reached + powerful electronic system, microprocessor-based + Water dosing from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + digital display of water temperature and quantity + Temperature is set with thermostatic mixing battery (rotary knob) + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x drain hose (2 meters length) with hook Technical data: - Dosing quantity: 0.1 - 99.9 litres or 1 - 999 litres - Temperatur ...

front roll 560x1500 for mixing mill Buzuluk 14823

rear roll 560x1500 for mixing mill Buzuluk 14823

Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm

PSV Groupe mixer Model: M60 Serial: 6003 Stainless, 60l capacity mixer, rotating bowl with tilt discharge, mixing paddle forward and reverse, mobile, 1Ph

Silo mixer: 10000 litres, motor: 11 kW (15 hp), electrical panel. Size: 2,20 x 2 x 5,75 height.

Silo mixer: 7500 litres, motor: 11 Kw (15 hp). With pelican mouth and electrical panel.

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

VMI 3500L mixing vessel 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph

VMI 2400L high shear mixing vessel 2012, Stainless, 2400l jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

Mixing volume: 900 liters Year of manufacture: 2023 / New machine / Stock machine CE mark: yes 2 paddle shafts Front outlet with pneumatic flap control pneumatic protective cover with safety shut-off incl. mast loading for 200 litre cutter wagon Infinitely variable mixing speed adjustment Mixing time preset Voltage: 400 V / 50 Hz. / 3 phases Connected load: 11 kW Control Voltage: 24V DC Frequency converter / touch control: Mitsubishi approx. dimensions in mm with load Latitude: 2.130 Length: 2.200 Height: 2,750

Sapphire 120L high shear mixing tank Stainless, high shear mixing vessel, variable speed mixer, pressure vessel, jacketed with adjustable temp settings, bottom mounted high shear, central bottom discharge, mobile, 1Ph

Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintance, 13Kw motors, highshear overhauled 2017, level detection, 50mm discharge pipe, 3Ph

Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Bulk material system for mixing loose flours, powder, ganulate, spices and weighing into smaller batches Manufacturer Daxner GmbH Year of construction 2008 / plant in top condition / in stainless steel The system consists of the following components: 2x Nozzle Filter DFK-14/25/150 2x separation container Dm 1990 mm with vibration floor drain to rotary valve 2x rotary valve type Westinghouse AL 300 3C 2x eddy current screening machine type WM20 with magnetic box for metal separation and 2 sets of screen baskets 4x Horizontal Counterflow Mixer HGM-2000 2x Mixer inlet with folding box 2x Tube screw conveyor RSHN-250 2 x Tubular Auger RSHN-300 2 x Stafsjö Gate Valve (knife gate valve) 4x Transport Dosing Screw, Company Schenck Process GmbH, Type GRMD 42.089.089.0380.44.421.1119 If you want more information, please send us an email to: infobarsso and we will send you all  ...

Mixing device for adhesives SCA Schucker GmbH SD203 490 cm3 without control used, tested ! Dimensions: 650 x 650 x 1300 mm

Stock# U2458-1 Used vertical stainless steel 1.4571 (AISI 316Ti) mixing tank by Heidelmeier (DE) with total volume 9000 l. Working volume up to 6000 l. Tank has internal diameter 2470 mm x length of the straight wall 1700 mm. Top flat, with bolted cover. There is an inspection manway with manually rised cover. Bottom welded, conical with central discharge. Tank is equipped with side wall agitator, type "jet stream" by Ystral type TFW-4. Driven directly by el motor 11 kW, 1475 rpm, 400/690 V, 50 Hz. Tank is mounted on 4 stainless steel legs. Last time used in chemical production.

A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible.

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Name: Mixing tank Manufacturer : Becomix Type: M 15 Technical specifications : Mixing tank, very good mint condition (was only used for the test run) Total boiler capacity 26 l Net capacity 15 l Mobile table version Product Area Material 1.4404 Boiler room material 1.4541 Usable space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Can be heated with steam or water Coolable with water Turbo dissolver agitator power 0.75 kW, nominal speed 1,390 rpm, mechanical seal Operating manual available

A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible.

PLC CONTROLLED MIXING, BAG FILLING AND WEIGHING SYSTEM, for plastic granule, customized to the project, including [vertical mixers](.germanplast.eu/it/annunci/4309783-vertical-mixers-from-5-to-3 0-m3), buffers,, pneumatic system with deviators, cyclones, .., with and without loading screws, loading cells, digital display, visual and sound alarms, all managed by a PLC

Mixing tank type D 63 F Properties: Total height 1020 mm Width 400 mm Overall length 620 mm Installed motor power 0.18 kW from Mischtechnik GmbH, Ottobrunn Type V 1