concrete mixin plant used for sale

Mobile concrete batching plant SUMAB 500: - The basic module is equipped with 2-4 hoppers. - Completely pre-assembled at the factory, which reduces assembly time. - Does not require a special foundation for installing the main unit of the installation (only a solid concrete slab). - Equipped with a sealed cabinet located on the structure and a computer control system. - Includes high-end installation features in a compact size. - The entire assembly (except silos) is transported in one 40-foot container. Basic indicators: - Dosing cycles 0.5 m3. - Turbo concrete mixer FTR 750/500. Equipped with a weighing system for aggregate and concrete. - Equipped with 1-2 units of 2 bunkers with a capacity of 7 m3 each. - Aggregates are dosed using B400 extraction conveyors. - Water dosing device with counter. - Water installation equipped with a 1.1 kW feed pum ...

Hook mobile mixing plant with Liebherr ring plate mixer R 0.75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Liebherr, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 45 – 50 kW Operation is via wireless handheld transmitter (1st mixer: on/off; 2. Conveyor belt on/off and open/close mixer).

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

Mixing plant/fresh concrete, with PEMAT mixer, winterproof with heating Sauter/gas, capacity 45-50 m³/h - Binder: 2x60 t (30x30)t & complete silo technology & cement screws - Aggregates: Bucket elevator via revesier belt in chambers (chimneys new about 3 years ago) Boxes/volume = 5 chambers (40,40,30,70,30)t, incl.: moisture measurement, incl.: mixer feed = weighing container (3000 kg) to the inclined belt (cleats) in mixer - Additives: incl. storage/volume: Second-chamber scale 25/5 kg - incl. spirit level: container scale 300 kg - Mixer : PEMAT - Partial mixer 1.25 m³ with 2 mech. Whirling

Mischturm, Fabr. Liebherr, type Betomat 235 Aggregate silo size 290 m³ / chambers Cement silo: 3 silos (2x60 to + 1 divided with 2 x 30 tons) Forced Action Mixer: BHS Twin Shaft Trough Mixer = Type: DKX 1,67 / refurbished - 1 x Control: BENNINGHOVEN (latest version) Year of construction 89', the system was completely overhauled 5 years ago with control electrical conveyor belt - 1 x Kroll oil heater for winter operation The price of 65,000 euros is intended as a basis for negotiation, as the customer needs the space.

Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper • Cement dosing • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or ...

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Scraper plant Type: SW CRS 150 Year of Make: 1993 Theoretical flow rate: 150 cbm/h Current: 115 A Voltage: 220/380 V Cabin weight: 4,400 kg

TECHNICAL SPECIFICATIONS Manufacturer: ELBA Description: Radial Scraper Machine Type: Stationary Type: RSA 70D Year of Make: 1996 Boom length: 20 m Connected load: 65 kW Operating voltage 380V Weight: approx. 5,000 kg

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

IBS G60 is a mobile gravimetric concrete mixing plant capable of producing not only cement mixtures, but also cold asphalt, recycled cold asphalt, soil stabilization mixtures and soil remediation mixtures. The machine is equipped with two separate aggregate hoppers (5 m³ each), a cement hopper (3 m³), and a water tank (1000 L). Additionally, it can be fitted with two tanks for different types of admixtures, as well as an optional emulsion tank. This makes the unit completely autonomous and enables concrete production directly on the construction site, providing significant economic advantages and ensuring high-quality concrete production. The machine is easy to operate and requires only one operator. Mix recipes are defined by entering the desired quantities of each component through the control panel. At the end of the production process, the machine prints a report containing the  ...

ID2123 Liebherr Betomat III-570 year 1985-2001 complete concrete mixing plant with 3 mixers (2 x ZE1500 / 2250, 1 x ZE 500/750), Sauer dosing system (year of construction approx. 2005) Complete concrete mixing plant with 3 mixers (2 x ZE1500/2250, 1 x ZE 500/750), Sauer dosing plant (year of construction approx. 2005)

Concrete filling station consisting of: - 4 hoppers with a total capacity of 14 m³ - incl. water dosing - incl. mixing area, disc mixer 0.5 m³, 5 mixing arms and 1 scraper, capacity 750 l, vibrates through mixing cycle, with electr. Emptying - incl. compressed air system - incl. cement silo 27.2 m³ 35 t - Incl. concrete conveyor belt - incl. control

Mobile Mixing Plant, Fabr. IMER 1. Mixer: 1,200 litre capacity, 800 L net output for compacted concrete 2. Control: Original IMER control type HPS 2100-P 3. Year of manufacture 2021 - In-line feeder 4. Cement silos: 3 pieces each 60 tons or 42.9 m³ capacity 5. Cement augers: 3 pcs, with lengths of 6.0 m & 6.8 m 6. Aggregate bunker: 3 chambers with a total volume of 65 m³ 7. Kübelwagen: with a 1,000 litre bucket

There are 3 attachment mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 2. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 3. Manufacturer: Eirich Year of Make: 1984 Volume: 500l 3 first layer mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of production: 1974 Volume: 500l 2. Manufacturer: Eirich Year of production: 1974 Volume: 500l 3. Manufacturer: Eirich Year of production: 1984 Volume: 500l

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

3 roles standing mixer with control panel and mixer Manufacturer: King & Günther GmbH Type: Rexoplast Serial No.: 6306075 Year of construction: 1973 Mixer is equipped with Munkadur coating inside! In good condition!

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

On 4 castors-standing stainless steel mixing tank with propeller agitator Material: V2A (1.4301) Container has a hinged lid and a spout at the bottom with a valve DN 25 drawn forward. In very good condition!

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

Dossys Tetra Pak Dosys System for Fruit Dosing before filling in Yoghurt Cups

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

Stock# U2473-1 Used system for inline mixing powder with liquid. System consist of: - conical stainless steel AISI 321 feeding hopper with total volume about 4000 l, and working volume about 3800 l. Tank has top side wall feeding inlet with dimensions L 700 mm x H 350 mm, equipped with stainless steel lid closed on clamps. Tank has on conical side wall mounted vibrating device. Includes working platform with stairs. - inline liquid-powder mixer. Powder inlet connection 3". Mixing chamber has internal diameter 180 mm. Rotor is driven directly by el. motor 6.8 kW, 1455 rpm, 400/690 V, 50 Hz, in Ex design (Ex-IIC Exe IIC T3G6). Mounted on mobile stainless steel frame. - Stainless steel bag type dust filter by WAM in Ex design - Connection stainless steel pipes and valves.

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...

Cuoghi LTW mixing plant on slide, production up to 30 mc/h, consisting of hopper with scale for powder dosing, loading auger, high-speed mixer capacity 1.0 mc, agitator capacity 2.5 mc, vertical injector adjustable flow max 120 lt/min and adjustable pressure max 120 bar, air system with 200 lt compressor and motorized pneumatic valves, Control Cabin.

Condition: used,Other: Overall width: 1,950 mmTotal depth: 1050 mmTotal height: 1,400 mmHot mixer: approx. 10 litres - 5.5 kWCalter mixer: approx. 25 litres - 2.2 kWFflange closure of the hot mixer may be missing and would have to be replaced on site,Manufacturer: DIOSNA Dierks & Söhne

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible.

A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal.

Power: 1 kVA Year: 2021 Manufacturer: Ecokraft / MCW-Systemtechnik Model: Absackanlage für pelletiertes Schüttgut Serial No.: P21000055_4_0009 Features: Bagging system for pelletized product, with control cabinet, operator interface, conveyors and infeed hopper. Nennspannung 400 VAC, Steuerung 24 VDC, Nennstrom 3 A, Vorsicherung 16 A.Dimensions (mm): est. 4000 x 2500 x 3500 Weight (kg): 500 Auction-ID: A1-48428-5

Used containers Good condition Dimensions see photo

Sugden Engineering Twin propeller Mixing Vessel. 200 L Stainless vessel, 2 top mounted paddle stirrers, Vessel 45 degree sloped base to outlet.

Screw (small) Drawing no. 14203-461D1

P52 - used approx. 6-10 m³ / 6,000 10,000 litre polyester tank / fibreglass tank, mixing tank, brine tank, aboveground, upright, manufacturer Reich, in good condition. Dimensions: diameter approx. 2.50 m x height 2.50 m Vertically standing polyester tank, mixing tank, with funnel for loading salt or other media, underside completely closed, incl. mixing station. As pictured, could not be examined technically. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

front roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) Unused

rear roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) unused

NIP adjustment nut Drawing No. 14240-216E3

NIP adjustment screw Drawing no. 14240-517

Worm gear (small) Drawing no. 14240-546D1

Bull gear

Pinion Drawing No. 14240-113 z=26

Bull gear z=82