concrete mixin plant used for sale

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

The Tetra Pak Almix - Scanima Pilot Plant Mixer SPM-100 is a versatile vacuum processing system designed for pilot plants, product development and small-scale industrial production. It combines vacuum mixing, powder induction, high-shear homogenisation, heating, cooling and automated recipe control into one compact unit, making it ideal for producing a wide range of dairy, beverage and food products.The mixer is equipped with an integrated vacuum system that creates a controlled vacuum inside the vessel before and during processing. Operating under vacuum significantly improves powder incorporation by eliminating air, reducing foam formation and preventing oxidation. Powders such as milk powder, proteins, starches, sugar, cocoa, stabilisers and emulsifiers are drawn directly into the liquid through the integrated powder funnel, ensuring rapid wetting and lump-free dispersion while minimi ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU379X1448 LocationBarneveld MakeCollin TypeTischwalzwerk Main Features Size length210 mm Specified Features - Mixing mill Laboratory presscheck Motor4 kW 380 V With jacketcheck Mixing mills MaterialStainless steel General Mach.No.141 11 86 Year of construction1986 With switchcheck Floorspace1,13 x 0,45 m Total height0,60 m Weight150 kg Extra Specifications2 roller wals, roll dia. 100 mm, roll width 210 mm&:nbsp:Mixing millsCollinPlastic machinery > Mixing millsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) With jacketcheck Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: - ...

General SKU362X851 MakeCOLLIN LocationBarneveld CEcheck Type3-Roller Calander: calander type 250 × 600 Main Features Motor46 KW Width600 mm Specified Features - Mixing mill MaterialHardened Tool Steel Mixing mills Roll width600 mm (nominal 500 mm) Roll diameter252 mm Rolls can be heated/cooledcheck (roller 2&3) 9 kW: 320 °C With variable speed drivecheck Roll speed± 8,6 rpm Rolls can be adjustedcheck 0—2 mm With hydraulic unitcheck With motorcheck MotorServo motor nominal power 1.4 kW (per roll drive): unwinder 0.24 kW: winder 0.24 kW: hydraulic pump 2.2 kW: oil cooler 0.25 kW: heating 9 kW per heated roller Information No.4490-07-06 Year of construction2006 Mounted on framecheck With switchcheck With switchgearcheck Floorspace3,12 x 1,8 m Total height3,16 m Weight3500 kg Extra Specifications Application: finishing/planishing of foil materials up to 2 ...

General SKU357X1336 MakeBuss AG TypeMDK70-17D Mach.No.942500 Year of construction1988 Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zones3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hopperBuss ELS 70 Feeding with metering screw63 rpm MaterialStainless steel 1.4000 (410S) With jacketcheck General LocationBarneveld Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wo ...

General SKU214X079 LocationBarneveld MakeUnknown TypeUnknown Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variator3-36 rpm With temperature control20-270°C Electrical heatingcheck With jacketcheck General No.Unknown Year of constructionUnknown With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm&:nbsp:Mixing mills-Plastic machinery > Mixing millsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many  ...

Mixing installation, consisting of: - (3x) S/s double jacketed mixing tank, inside dimensions: (3x) Ø 1500 mm x 1500 mm, - (4x) circulation pump. - (2x) IBC tank, dimensions: 1200 mm x 1000 mm x 1150 mm. - (1x) steel platform, 5 steps, working height: 960 mm, total dimensions: 2200 mm x 1200 mm x 1960 mm.

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

660 x 2130 Bolling Dough Mixing Machine

NNP mixing vessel Stainless 500l mixing vessel, jacketed, top mounted motor with agitation and scrape surface, central bottom discharge, 3Ph

Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Refer to code 1133 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor. (ask for different capacities), for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters (possible gearbox, instead), inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle typ ...

cantilevered mixer 120l when filled with water approx. 100l usable volume with control box with stud work with ball segment valve as outlet 0 operating hours at the end customer

General SKU360W979 MakeBüchi No.109900 Year of construction1990 Mounted on legswheels Pressure Working pressure0.4 Bar Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Motor0.35 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity25 l Vessel sizesø 300 x 400 mm Dished bottomcheck Outletcheck Max. temperature-50°C/+200°C With propellor stirrercheck Motor0,35 kW (220/380 V 1390 rpm, (Ex)) Speed mixing shaft550 rpm MaterialBorosilicate Glass 3.3 With jacketcheck General LocationBarneveld With switchcheck Floorspace0,60 x 0,60 m Total height2,0 m Weight120 kg ATEX designedcheck Extra Specifications-1bar + 0.4 BarDouble segment stirrerStirring vesselsBüchiStirring vessels > Stirring vesselsBrand > Büchi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

General SKU328W698 LocationBarneveld CEcheck MakeLoedige Main Features MaterialStainless steel Volume250 Ltr. Motor22 KW Specified Features - Universal mixer Universal mixercheck Capacity250 l., (210 l.) Vessel sizes⌀ 785 x 500 mm With covercheck Inlet785 mm Pneumatic operated outletcheck Outlet⌀ 200 mm With motor22 kW, 400 V, 1460 rpm, (Ex) Rotor speed30-300 rpm With lump breakercheck With motor4.7 kW, 400 V, 1450 rpm Rotor speed1450 rpm MaterialStainless steel 1.4404 (316L) Information TypeMGT-250 Mach.No.16.141 Year of construction2008 Floorspace2,50x1,30 m Total height2,36 m Weight1900 kg ATEX compatiblecheck Extra Specificationscheck Suitable for mixing under Nitrogen. Mixing granulator for pharmaceutical products, cosmetics and food. GMP-compliant design. Modular WIP system for the machine and all additional components. : Universal mixersLoed ...

General SKU293X474 MakeATML LifeSciences TypeMM-JTBB360 No.MM-JTBB360-0001 Year of construction2013 Mounted on legsand wheels Main Features MaterialStainless steel Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld With switchgearcheck Floorspace1,50x1,0 m Total height1,36 m Weight250 kg CEcheck Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Y ...

General SKU293X475 MakeATMI LifeSciences LocationBarneveld CEcheck TypeMM-JTBB360 Main Features Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General No.MM-JTBB360-0002 Year of construction2013 Mounted on legsand wheels With switchgearcheck Weight250 kg Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

660 x 1500 Dough Mixing Machine Russian origin 110 kW motor Bearing-supported Flywheel gear system With brake Ready for operation / in working condition

General SKU200W006 LocationBarneveld MakeHPV TypeRV Base SO Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm With jacketcheck Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Specified Features - Inline mixer MaterialStainless steel 1.4404 (316L) General No.2002-M-1 Year of construction2013 With switchgear(as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000/5-ATEX, year 2013 ...

General SKU200W007 LocationBarneveld CEcheck MakeWaterleau TypeDiam 1210mm-L=3600mm Main Features MaterialStainless steel Motor5.5 KW Specified Features - Miscellaneous mixer Mixercheck MaterialStainless steel 1.4301 (304) With jacketcheck General No.2.11.560 Year of construction2013 Floor space5,65x2,65 mtr Total height2,20 m Weight6470 kg Extra Specificationsdrum mixer with spraynozzles.-Drum diameter 1210mm.-Lenght 3600mm.- Input and output to belt conveyor.- Input 350x350 mm, output 600x400 mm- R77 Helical gearmotor, speed 1455/104 rpm, 5,5 kW&:nbsp: Technical specs Extra informationagglomeratorMiscellaneous mixersNew arrivalsWaterleauMiscellaneous > Miscellaneous mixersNew arrivalsBrand > Waterleau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU309X465 MakeHaagen &: Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) With jacketcheck General LocationBarneveld With switchgear( as is) Floorspace7x2,5 m Total heig ...

General SKU041H133 MakeTK Fielder Ltd Eastleigh, Hampshire TypePMA-800/2G Pharma Matrix Mach.No.2486 Year of construction1985 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor48 KW Specified Features - Universal mixer Universal mixercheck Capacity800 Ltr Vessel sizesdia. 1300x600mm With covercheck InletDia. 220mm Pneumatic operated outletdia. 200mm Outlet180x320mm With jacketcheck With motor37,0 kW (400 V) With lump breakercheck With motor11,0 kW (400 V) Rotor speed2915 Rpm MaterialStainless steel 1.4401 (316) With jacketcheck General LocationBarneveld Floorspace3,0x1,6 m Total height2,5 mUniversal mixersDiscountTK FielderMixers > Universal mixersDiscountBrand > TK Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destin ...

General SKU279M288 LocationBarneveld MakeOostendorp apparatenbouw B.V. TypeMixing reactor of 800 liter No.6073 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity800 Ltr. Vessel sizesdia. 900x1400mm Dished bottomcheck Dished top sidecheck Manhole/handgat dia. 150mm Top connections7x Outletdia. 50mm With jacketcheck Max. temperature150 Degr. C. With propellor stirrercheck Motor0,75 KW, 220/380 Volt (Ex) With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General Year of construction2005 Mounted on legscheck Floorspace1,2x1,2 M Total height3,3 M Weight1200 KgStainless Steel ReactorsPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalAgrochemicalsRubb ...

General SKU279Y275 LocationBarneveld CEcheck Dimensions Cake capacity4.8 Specified Features - Filterpress Material finishPolished inside With jacketcheck Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Surface1 m2 Specified Features - Filterpress Filter presscheck Filter surface1 m² Stainless steel platescheck Number of platens8 Number of frames7 + 1 end frame Internal platen sizes270x275 mm External platen sizes290x290 mm Platen thickness8 Frame thickness8 Cake capacity4,8 l. Connections4x DN20 With hand valvescheck Manual operated closingcheck Manual openingcheck With feeding pompcheck Capacity17-20l/h Motor0,12kW, 230V MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General MakeStrassBurger Filter GmbH Serial02900403215 Year of construction2015 Mounted on wheelscheck Floorspace1,4x1,5 m  ...

General SKU279Y274 LocationBarneveld CEcheck Dimensions Cake capacity4.8 Specified Features - Filterpress Material finishMirror polished inside With jacketcheck Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Surface1 m2 Specified Features - Filterpress Filter presscheck Filter surface1 m² Stainless steel platescheck Number of platens8 Number of frames7 + 1 end frame Internal platen sizes270x275 mm External platen sizes290x290 mm Platen thickness8 mm Frame thickness8 mm Cake capacity4.8 l. Connections4 x DN20 With hand valvescheck Manual operated closingcheck Manual openingcheck With feeding pompProminent, type: S1BAH12017SSTS Capacity17-20l/h Motor0,12kW, 230V MaterialStainless steel 1.4552, Stainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General MakeStrassBurger Filter GmbH Serial02900403115 TypeSF  ...

Complete Haarup 1150 concrete mixing plant from 1999. The plant has recently been dismantled and are ready to ship. The plant comes with skip hoist, Haarup Mixodatamat 3000 and instruction books. Amexpo Consult Merkurvej 31, 9370 Hals-Denmark. +45 29251017.

Contec Mini 15 - Concrete mixing plant Mixer M 500/300 liter Capacity 4 - 9 m3 Aggregate hoppers: 2 x 2.5 m3 on a stable metal frame Belts: 2 belts integrated and attached to the aggregate hoppers

Mobile concrete batching plant, SUMAB K-60 Technical details: • 4 total storage tanks with 3.8 м3 each, with the possibility of increasing storages to 5 m3 • Pan mixer 1800/1200 litres, coated with 12 mm layer of special steel. • Automatic control for opening the damper supply for precast concrete. • 5 mixing arms. The special arrangement of the arms in the pan mixer allows all the parts of the mixer to be covered during the batch, which means that a high-quality concrete product is achieved. The K-60 Mobile concrete plant features a comfortable control cabin that allows for the automatic control of the system. The modern Siemens computer system enables you to produce over 100 recipes and types of concrete. You can print the specifications of any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Adva ...

Liebherr Betomix 2.0 Z, capacity 90 cbm/h, mixer type Liebherr RIM 2.0 with ceramic tiles and rotor was overhauled in 2022, SPS RIEGER DIDO WIN, Mesomatic displays installed in a container, storage tower 240 t capacity with 6 boxes, 2 x 80 t cement silo, 1 x 100 t cement silo, 1 x 100 t double chamber silo, elevator with feed hopper, Hot air heating and hot water preparation KROLL, etc

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M C 1TZ capacity: 56 cbm/h working hours: 0,0 Mixer: pan mixer - Stetter 1,0 m3 Storage bins / compartment batcher: 4 aggregate inters per 10cbm (Total 40 cbm) Silos: Optional 2 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference tublomix plants by appointm ...

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M 2,5 TZ capacity: 112 cbm/h Mixer: Stetter twin shaft mixer - Stetter DW 2,5 Mixer cleaning system optional possible Storage bins / compartment batcher: 4 aggregate inters per 17,5 cbm (Total 70 cbm) Silos: Optional 2 – 5 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 550 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling obje ...

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M3 ILS capacity: 135 cbm/h working hours: 0,0 Mixer: Stetter twin shaft mixer – Stetter DW 3,0 Mixer cleaning system optional Storage bins / inline silo: 6 bins = 2 x 30 m³ + 4 x 15 m³ (total 120 m³) Silos: Optional 2-6 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference EASYBATCH plants by appointment possible!  ...

Ready-mix Concrete Plant, Concrete Mixing Plant Used Tower complex make Krupp Year of construction 1969 – Control engineering originally by Pfister Waagen Augsburg -Control currently from Dorner Electronic Complete system consisting of: Main tower steel structure by Krupp Multi-chamber silo 1 control room 1 Mixer THZ 3000 (Teka) Year of production 1980 Control engineering originally by Pfister Waagen Augsburg 1 mixer approx. THZ 1500 or THZ 2250 1 Single component silo with screw conveyor on steel frame 4-component silos with screw conveyors on steel frame 1 Sand Filling Elevator 1 steam boiler 1 Residual concrete preparation ( washing screw ) Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

- New / unused BHS Sonthofen gearbox units - Individual offers possible Pos. 01) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 02) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 03 FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 04) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 05) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - D ...

1 piece used FULL MOBILE CONCRETE MIXING PLANT SBM / SIMEM SMM 100 Year of construction 2007 Performance: 100 kbm/h Mixer unit Mixer SIMEM MSO 3000/2000 Additive dosing unit 2X 12.5l Cement scale 1200kg water dosing unit 600l Row silo / aggregate storage unit / compartment batcher Weighing belt 5000kg Aggregate/aggregate boxes: 4 X approx. 38.5 kbm Cement silos 4 X approx. 80 ton Fully automatic Dorner control Installed in a container Additive storage Installed in a container System is in a technically well-maintained and fully functional condition. Location: Austria Available: IMMEDIATELY Price: on request price net , ex location without guarantee and/or warranty, mistakes and/or false representations reserve, selling in current state – standing or recumbent, subject to prior sale

1 used concrete mixing plant Manufacturer: Liebherr Type: Betomix 1.0 Year of construction: 2006 Capacity/h : 60 m³/h compacted concrete Aggrgate inline silo: 120m3 (4 x 30 m³) Mixer: Liebherr ring pan mixer 1.0 Dosing: Aggregates: by weighing belt Cement: cement scale Water: water dosing hopper, Admixtures: Chemical scale / chemical dosing device Control container: include control system: SIMMA silos: 3 X 100to (Transport dimension D=3m, feet can be unscrewed) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON

High-performance Dry Mix Concrete Plant SUMAB S-2000 S – fully automatic. Features include 4 x 25 m³ aggregate hoppers, 2 m³ aggregate weighing system, 1,000 kg cement weighing system, 52 T cement silo, screw conveyors, water dosing unit, additive dosing, K2 Lite computer automation system. Compact design for container transport. Includes control cabin, air compressor, and basic spare parts set. Built with durable materials and designed for efficient, continuous operation. Ideal for high-volume production. Ready for immediate installation.

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Concrete batching plant Turbine type: Sternanlage (Schrapper) Type: H2 Year of Make: 1993 Mixer: BHS Twin Shaft Compulsory Mixer LEKX2.0 Number of binder silos: 3 pcs. Silo capacity: 2 x 100 t (single chamber), 1 x 100 t (double chamber) Number of augers: 4 pcs. Schrapper Type: Stetter Schrapper SW CRS150 Scraper capacity: 150 cbm/h Cement scale: yes Additive scale: yes Number of admixture tanks: 2 pcs. Control: SIMATIC OP27 RC system: Klärfix SPECIFIC COMMENT - Incl. control and control cabinet - No heating system - Fully functional