concrete mixer used for sale

bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-266

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-166

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-66

Mixers, make Haarup, planetary mixers = - Make Haarup, type 2250/1500 (2,250 l mixer) - 75 kW, dead weight 6,600 kg - Condition very well maintained and maintained - Available from the end of August 2026

60 m² Ultrathin Classic BT WF Sand Lightweight Concrete Brick Slips – 60 Boxes Specifications: Product line: Ultrathin Type: Classic BT WF Sand Color: Classic Sand / Sand Product segment: Wallcovering Product group: Stone Veneer Material: Lightweight Concrete Execution: brick slip / façade strip Dimensions per brick slip: approx. 210 x 50 x 7 mm Contents per box: approx. 1 m² Number of boxes: 60 Total area: approx. 60 m² Weight per box: approx. 9 kg Total weight: approx. 540 kg Features: Natural brick look Suitable as wall cladding / stone veneer Suitable for facades, interior walls, accent walls and various renovation and finishing projects Packed in original cardboard boxes Particularities: Concerns a batch of building materials from stock. The boxes may show signs of storage and use on the packaging. Several equivalent lots of approx. 60 m² eac ...

60 m² Ultrathin Classic BT WF Sand Lightweight Concrete Brick Slips – 60 Boxes Specifications: Product line: Ultrathin Type: Classic BT WF Sand Color: Classic Sand / Sand Product segment: Wallcovering Product group: Stone Veneer Material: Lightweight Concrete Execution: brick slip / façade strip Dimensions per brick slip: approx. 210 x 50 x 7 mm Contents per box: approx. 1 m² Number of boxes: 60 Total area: approx. 60 m² Weight per box: approx. 9 kg Total weight: approx. 540 kg Features: Natural brick look Suitable as wall cladding / stone veneer Suitable for facades, interior walls, accent walls and various renovation and finishing projects Packed in original cardboard boxes Particularities: Concerns a batch of building materials from stock. The boxes may show signs of storage and use on the packaging. Several equivalent lots of approx. 60 m² eac ...

60 m² Ultrathin Classic BT WF Sand Lightweight Concrete Brick Slips – 60 Boxes Specifications: Product line: Ultrathin Type: Classic BT WF Sand Color: Classic Sand / Sand Product segment: Wallcovering Product group: Stone Veneer Material: Lightweight Concrete Execution: brick slip / façade strip Dimensions per brick slip: approx. 210 x 50 x 7 mm Contents per box: approx. 1 m² Number of boxes: 60 Total area: approx. 60 m² Weight per box: approx. 9 kg Total weight: approx. 540 kg Features: Natural brick look Suitable as wall cladding / stone veneer Suitable for facades, interior walls, accent walls and various renovation and finishing projects Packed in original cardboard boxes Particularities: Concerns a batch of building materials from stock. The boxes may show signs of storage and use on the packaging. Several equivalent lots of approx. 60 m² eac ...

60 m² Ultrathin Classic BT WF Sand Lightweight Concrete Brick Slips – 60 Boxes Specifications: Product line: Ultrathin Type: Classic BT WF Sand Color: Classic Sand / Sand Product segment: Wallcovering Product group: Stone Veneer Material: Lightweight Concrete Execution: brick slip / façade strip Dimensions per brick slip: approx. 210 x 50 x 7 mm Contents per box: approx. 1 m² Number of boxes: 60 Total area: approx. 60 m² Weight per box: approx. 9 kg Total weight: approx. 540 kg Features: Natural brick look Suitable as wall cladding / stone veneer Suitable for facades, interior walls, accent walls and various renovation and finishing projects Packed in original cardboard boxes Particularities: Concerns a batch of building materials from stock. The boxes may show signs of storage and use on the packaging. Several equivalent lots of approx. 60 m² eac ...

Auction-ID: A1-49846-150

Manufacturer: Normet Model: Norrunner Type of machine: Concrete spraying machine Year of manufacture: 2017 Power: 425 kW Total weight: 31720 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

74cc, 2 stroke, maximum speed 9500 rpm, fuel tank capacity 1100ml, maximum cutting depth 125mm, bore diameter 25.4mm Auction-ID: A1-40897-1033

Auction-ID: A3-46156-21774

Connection: 230V Power: 2300W Auction-ID: A1-49793-1021

Connection: 230V Power: 2300W Auction-ID: A1-49793-955

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-50091-360

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-50091-359

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50065-166

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50065-266

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50065-66

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-66

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-166

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-266

Rated power 5000W - Constant RPM 6500rpm - Voltage AC220V - Linear Velocity 21m/s - Max cutting depth 350mm - Incl. Water pump unused Auction-ID: A1-40314-130

Oil-free & Brushless Ring Saw - Rated power: 5000w - constant RPM: 1800 rpm - Voltage AC220V - Max cutting size: 39 cm - Blade Diameter: 500 mm - nw: 11.5 kg Auction-ID: A1-40314-86

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2

Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

with mixing and Meng arm cooling vacuum

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

Solder Paste Mixer Single Paste Glass Mixer From Refrigerator to Screen Printer in Less Than 15 Minutes Connection Voltage: 230 VAC Auction-ID: A7-49816-124

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).