concrete factory used for sale

Floor cutters, asphalt cutters, concrete cutters -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Control: Siemens 840 D X - axis 540 mm Y - axis 300 mm Z - axis 300 mm A - Axis (dividing apparatus) 360° C - Axis (rotary table) 255° Grinding spindle: HSK50 Tool changer: 4-fold Other accessories: Factory available Software: Customer-specific factory delivery Suction LTA Coolant system Turbo Separator Extinguishing system

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

Eirich mixer granulator 3000 liter capacity Semi-mobile body with 4 hydraulic supports with low-bed low-loader transportable approx. 27 tonnes. Container drive 2 x 22 KW Whirler drive 160 KW Water and chemical dosing Mixer weighing Hydraulic unit Compressor Complete factory control for feeding and discharging conveyor belts Machine was used by us for the production of cat litter i.e. Various wet and dry components were weighed and then slowly homogenized and then granulated with different differential speeds to a stable granulate 1-5 mm. The system includes a complete control system.

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Characteristics are shown in the photo Without documentation Bought at the Kirov factory in St. Petersburg.

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

3 trays Table length: 3250 mm Machine is in excellent condition It has been used as spare machine in factory.

Machine type Pulse-Arc inverter welding system Brand EWM Type Phoenix 300 Expert Supply voltage 3 x 400 volts Adjustment range 5 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 220 amps 100% ED at 170 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 1,000 x 480 x 1,100 mm Weight 65 kg Age approx. 10 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of welding gloves with cuff 1 piece spare parts box kpl. Equipped 1 can non-stick spray ME 4000 1 piece instruction manual Warranty 6 mont ...

LASER BLM ADIGE COMBO Year 2007, 3500 Watt Rofin DC035 Working area 3000x1500 Automatic loding/unloading . Workable tube dimension : min. 16 mm. max 220. Max tube dimension at loading is 6000 mm. This Combo at the moment is unlicensed for the tube license. The tube software Adige BLM license can be purchased easly. The price of this Combo without tube license is Euro 27.000 The price of this Combo whit the tube software Adige BLM license is Euro 52.000 The laser is visible during daily production in the factory. It is in the North of Italy

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

GeneralCNC Turning Centre with C axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle15/22/22 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.-5000 rpmBar diameter max.65 mmSwing- Ø, max.755 mmMax. Turning Length510 mmWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (spindle 1) 22/ 15 kW, 5,000 min-1The NLX 2000 adopts a highly reliable main spindle de ...

We offer a Doka Framax Xlife 3.30m with 75% discount - 423.55m² New value: 297.446,00€ - Special net price 74.500€ + VAT Complete with accessories on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Pcs. Description 32 Framax Xlife element 2.70x3.30m 2 Framax Xlife element 1.35x3.30m 4 Framax Xlife element 0.90x3.30m 3 Framax Xlife-Uni-Element 0.90x3.30m 5 Framax Xlife element 0.60x3.30m 4 Framax Xlife element 0.55x3.30m 5 Framax Xlife element 0.45x3.30m 3 Framax Xlife element 0.30x3.30m 22 Framax Xlife inner corner 3.30m - new Finply formlining 14 Framax Xlife inner corner 3.30m 2 Framax Xlife outer corner 3.30m 3 Framax hinge corner I galvanized 3.30m 3 Framax stripping corner I 3.30m If you have any questions, pleas ...

pressure: 160 t distance between columns: 1500 mm stroke: 400 mm working feed: 2,4 mm/sec : 700 slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,48 mm/sec pressing speed: 2,4 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar table-size: 1740 x 996 mm total power requirement: 3 kW weight of the machine ca.: 2,65 t dimensions of the machine ca.: 1,74 x 1,73 x 2,185 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further information. The data  ...

Stand:6640x870 mm/Trusses:2880 mm/Compartment load: 1,6to Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 11,945 mm Number of fields per row of shelves: 04 pcs. á 2,880 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 05x pallet rack stand, used Material color: cream white Stand profile: 85 x 50 x 17 x 3.0 mm Stand type: C 808 S275 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 6,640 mm high 870 mm deep 32x pallet rack trusses, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm load per pair of trusses 1,600 kg at the same time. distributed load 64x locking pins, used Execution: compl. galvanized For securing the longitudinal  ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

Stand:6640x870 mm/Trusses:2880 mm/Compartment load: 1,6to Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 26,770 mm Number of fields per row of shelves: 09 pcs. á 2,880 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 10x pallet rack stand, used Material color: cream white Stand profile: 85 x 50 x 17 x 3.0 mm Stand type: C 808 S275 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 6,640 mm high 870 mm deep 72x pallet rack trusses, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm load per pair of trusses 1,600 kg at the same time. distributed load 144x locking pins, used Execution: compl. galvanized For securing the longitudinal ...

Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 14,820 mm Number of fields per row of shelves: 05 pcs. á 2,880 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 06x pallet rack stand, used Material color: green Stand profile: 70 x 40 x 10 x 4.0 mm Stand type: C 704 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 5,570 mm high 870 mm deep 40x pallet rack trusses, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm load per pair of trusses 1,600 kg at the same time. distributed load 80x locking pins, used Execution: compl. galvanized For securing the longitudinal members Against unintentional lifting 24x heavy-duty dowels, new Ma ...

Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 20,720 mm Number of fields per row of shelves: 07 pcs. á 2,880 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 08x pallet rack stand, used Material color: green Stand profile: 70 x 40 x 10 x 4.0 mm Stand type: C 704 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 5,570 mm high 870 mm deep 56x pallet rack trusses, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm load per pair of trusses 1,600 kg at the same time. distributed load 112x locking pins, used Execution: compl. galvanized For securing the longitudinal members Against unintentional lifting 32x heavy-duty dowels, new M ...

Technical data for the pallet racking system: Shelving system: Tegometall Type: CI Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 23,900 mm Number of fields per row of shelves: 07 pcs. á 3,300 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 08x pallet rack stand, used Material color: sendz. galvanized Stand profile: 100 x 65 x 2.0 mm Stand type: P3 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 5,000 mm high 1,100 mm deep 28x pallet rack trusses, used Material color: blue Box profile: 150 x 50 mm Truss type: PT150M clear width: 3,300 mm load per pair of trusses 3,500 kg at the same time. distributed load 56x locking pins, used Execution: compl. galvanized For securing the longitudinal members Against unintentional ...

Technical data for the pallet racking system: Shelving system: Tegometall Type: CI Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 13,700 mm Number of fields per row of shelves: 04 pcs. á 3,300 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 05x pallet rack stand, used Material color: sendz. galvanized Stand profile: 100 x 65 x 2.0 mm Stand type: P3 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 5,000 mm high 1,100 mm deep 16x pallet rack trusses, used Material color: blue Box profile: 150 x 50 mm Truss type: PT150M clear width: 3,300 mm load per pair of trusses 3,500 kg at the same time. distributed load 32x locking pins, used Execution: compl. galvanized For securing the longitudinal members Against unintentional ...

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 2150 mm - Width : 1350 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 13,705 mm Number of fields per row of shelves: 05 pcs. á 2,645 mm Number of levels plus ground level: 03 pcs. The scope of delivery includes: 06x pallet rack stand, used Material color: blue Stand profile: 80 x 70 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 6,000 mm high 1,000 mm deep 30x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Truss type: 2T 120 clear width: 2,645 mm load per pair of trusses 1,500 kg, at the same time. distributed load 60x locking pins, used Execution: compl. galvanized For securing the longitudinal members Against unintentional lifting 24x heavy-duty  ...

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3800 mm - Width : 1850 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Frigoscandia GCM 76 spiral chiller in beautiful condition. Large product gap (150mm). Has been chilling cooked soup product in European factory. Can be viewed 'in situ'.

Autoclave from Spomasz-Pleszew Factory number 112 Maximum working pressure 4 bar Maximum operating temperature 5/151 degrees Celsius Capacity 3410 L Test pressure 6.3 bar Weight 2240kg CURRENT UDT AUDIT BOOK Made of carbon steel 12 pieces of trolleys included.

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3100 mm - Width : 1400 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Tapping machine Hagen & Göbel HG 16 C 12/16 1.950 € VB Pick-up only 39114 Saxony-Anhalt - Magdeburg 01.03.2023 3 Description Offer Tapping machine Hagen & Göbel HG 16 C 12/16 with coolant tank/pump without quill guide spindles and the tool holders (Fig. 1-6) The machine is sold to our customer due to a business change. It is operational and functional as far as it works. Manufacturer: Hagen & Goebel Soest Type: verm TB C 12/16 Ref. 2226 Year built:1993 Cutting capacity: depending on the material 4-56 mm at 14-28 m/min see performance plate Drive power: 3AC 380 V, 41.1/7.1 A 1.2 kWQ Engine: KBA 100 A 6 Coolant tank: approx. 25 l gesch. Cooling center pump: TB40/220-x 380V, 0.25 A, 12 kW, 2700 1/min, 50 l/min Accessories: no Dimensions: approx. HxWxD 1500 x 990 x 1400 mm Weight: approx. 750 kg estimated Condition: used see photos The machine is stil ...

We offer the following Doka Framax elements: Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Doka Framax Xlife 1483,92m² with 75% discount on the original price! New value: 839.448,00€ Special net price: 209.862,00€ Pcs. Art.-No. Designation 48 588608500 Framax Xlife element 2.70x3.30m 40 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 120 588100500 Framax Xlife element 1.35x2.70m 60 588102500 Framax Xlife element 0.90x2.70m 64 588110500 Framax Xlife element 1.35x1.35m Total: 209.862,00€ Accessories available on request. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork r ...

Technical data and further information: Shelving system: Bito Type: PRO Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 37,380 mm Number of fields per row of shelves: 11 pcs. á 3,300 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 12x pallet rack stand, used Material color: sendz. galvanized Stand profile abm.: 90 x 65 x 1.75 mm Profile Type: P2 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 2,100 mm high 1,100 mm deep 44x pallet rack trusses, used Material color: blue Box profile: 150 x 50 mm Truss type: PT150M Agraffe: 5 HK (hook) clear width: 3,300 mm load per pair of trusses 3,500 kg at the same time. distributed load Material color: sendz. galvanized Stand profile abm.: 90 x 65 x 1.75 mm Profi ...

Fully automatic system with 1 vibrating press locksmith BH 30 For production e.g. : - Concrete blocks, bricks, partition bricks - Soundstones -Curbs - Fireplace stones -Gutter - Ceiling stones, etc. - Stationary vibropress BH 30 with two filling parts for two-layer products - Chain conveyors for fresh side - Sliding tracks for dry side - 1x mast and 1x lowering scaffold - Kuboter for the removal of hardened stones from the return transport on the parcel transport - Production pallets 1400x800mm – 0 pcs Product height : from 55 to 550 mm The new automation : Siemens S7 The control of the vibrator with frequency converter Incl. approx. 5 pcs, different shapes Fully automatic system with 1 vibropress locksmith BH 30 for production of for example concrete blocks, wall stones, partition stoner -Sonic Stones -curbs -fireplace stones -Gutter -ceiling stones -stationa ...

We offer the following Doka Framax elements: Doka Framax Xlife 2.70 x 1.35m with 75% discount = 453,00€/pc. net. 120 x Framax Xlife element 2.70x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

Marel/Stork/Townsend twin spiral hot air/steam oven 600 mm belt Machine in lovely condition direct from major UK factory which stopped producing for fast food chain in 2016.

Tipper Tie Alpina Swopper SW330S 330 litre bowl cutter. Running in production until the factory closed in 2020.

GEA CFS FlowCook HLT6000/600  Electrically heated. Hot air and steam. Belt width: 600 mm; Cooking length: 6000 mm Has previously been used for cooking burgers and nuggets in one factory and then on rental to a customer who was roasting trays of nuts. 

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

BETOMIX PADDLE MIXER Concrete/BETON Mixer. Two Engines Two Gearboxes

We offer the following Doka Framax elements: Doka Framax Xlife 2.70 x 2.70m with 75% discount = 1065,50€/pc. net. 21 x Framax Xlife-Element 2.70x2.70m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 02x chipboard second choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm ...

Calliper / Caliper / NEW - Unused Measuring length : 4000mm Beak length : 500mm Vernier : 1/20mm according to factory standard Scale and caliper made of aluminium profile Beaks and tips made of stainless steel / Hardened Anti-glare reading Weight approx. 5 Kg Delivery in a wooden box Cjr0apvdox

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 7,500 mm Number of fields per row of shelves: 03 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 04x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 12x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 06x chipboard II choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Su ...

Juice Pasteurizer Gebhardt EHA45 Electrically Heated 450 l/h Never Installed This Gebhardt juice pasteurizer is specifically designed for fruit juice production in small firms or gardening and horticultural associations. It can handle also juices with pulp and even tomato juices. This Gebhardt EHA45 pasteuriser is equipped with coaxial spiral heat exchanger and hot water circulating pump. The juice tube of a smaller diameter is located inside a larger hot water pipe. Hot water and pasteurised juice move in the opposite direction of each other, ensuring that the juice is warmed evenly. The power of the pasteuriser is step-by-step adjustable according to the number of operating heaters. The thermostat keeps the hot water temperature at a desired level selected by the user, which should be 4-5 degrees warmer than the temperature of the juice that comes out. The juice temperature is ad ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet racking trusses, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 08x locking pins, used Execution: compl. galvanized For securing the longit ...