We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Ruhle Dicer SR 2 Turbo, loading device for euro boxes, discharge-conveyor belt, touch PC control,different grid sets, cutting temperature: from -5°C to +80°C, capacity: max. 3000 kg/h. The machine is currently in the refurbishment and will be available soon. You are welcome to test it in Koblenz, Germany.
used
Cortina DS 3100, working range: 8,000 x 2,000 mm, year of construction Dec. 2004 CNC-controlled cutting machine with robust bridge suspension, form-fitting longitudinal drives and precisely machined guide profiles, Connection voltage: 400 V 50 Hz, TN-S mains (A/PE/N) track width: 3100 mm working width: 2000 mm dead length: 1500 mm Total width: 3525 mm Operating side: left power supply: right fuel gas: propane incl.: OmniCom Explorer C drive 15 m/min DC dual-sided Longitudinal drive on rail feet machine cutting torch ALFA (with internal ignition) OmniFlow automotive supply (gas quantity control up to 6 burners) OmniFlow Control torch suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile first height detection interlock for a maximum of 2 systems HT 4400 HySpeed fine beam plasma cutting system cutting up to 50mm energy supply via energy chain (autogen/plasma) cu ...
used
3000 x 1500mm Year: 2004 Cutting hours: 21,350 Turbo: 37,990 With Byloader / Pallet change
used
Producer: Ma-Ga Type: A2-812 Construction year: 2014 Power supply: 230V/50 Hz Dimensions of the table: 300 x 250 mm Thickness of the discs: 0-28 mm Maximum dimensions of cutting: 230 mm (length), max height from the product 190 mm External dimensions: 635 x 500 x 540 (H) mm Electronic disc counter Maximum disk number 999 Built-in Sharpener Diameter of the blade: 300 mm Weight: 50 kg Slicer cutting machine Ma-GA type A2-812 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Cortina DS 3100, working range: 8,000 x 2,000 mm, built in Dec. 2004 CNC controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 V 50 Hz, TN-S Network (§ / PE/N) Track width: 3100 mm Working width: 2000 mm Dead length: 1500 mm Total width: 3525 mm Operating side: left Power supply: right Fuel: Propane Including: OmniCom Explorer C drive 15 m / min DC Carrier for double-sided longitudinal drive on Schienenfüßen Machine cutting torch ALFA (with internal ignition) OmniFlow autogen supply (gas volume control up to 6 burner) OmniFlow control Burner suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile initial height determination Interlock for maximum of 2 plants HT 4400 HySpeed fine beam plasma cutting system Cutting up to 50mm power supply thro ...
used
Index Cutting Machine Hunkeler Model RE32 Year 1975 Capacity up to 8 mm Tool width up to 320 mm Tools 1 straight angle tool with a small radius is included (R=1,5 or R=2mm?) Details machine has undergone a electrical and mechanical modification to ensure a safer working Available direct
used
MEDIUM CUT FOR MÜLLER MARTINI 305
used
Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Producer: Bizerba Type: S-110 Connection: 230 V Steaker and strip cutter BIZERBA type S-110 -40 round knife -Blade spacing 4 mm Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.
used
Stephan MCHD 30-II micro cutter
used
Magurit frozen meat cutter
used
Bread slicer - Make: RÖSEN & ROBBEST - Model: SPA 38 (38 bread liner) - Condition: Used, fully restored - Warranty: 6 months
used
used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
Creasing/scoring/cutting machine Schöber Model A80 Year 1996 Working width 800 mm feeder can be connected to any sheet feeder or used in-line, we can supply a feeder on request as wel as a delivery belt or jogger Available direct
used
MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system
used
Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.
used
Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.
used
Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.
used
AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50
new
PVS 125 H micro cut Inotec drive power 15 KW product performance from 300 kg to 900 kg an hour for various products pesto sauces soups Majnäse and similar
new
With step-less variable speed controls for both knife and conveyor speed, the BD75LA is a flexible and dynamic solution to cutting leafy salads, herbs, long bodied vegetables and fruits. Able to output material at thicknesses anywhere between 1 and 15mm, this machine boasts an impressive versatility. An with an output of 250 kg. per hour — the BD75LA is capable of meeting high throughput demands with exceptional reliability. Technical Details Capacity/ Hour: 250 kg. Speed: Variable Output Thickness: 1-15 mm Dimensions: 100 x 74 x 125 cm Power: 0.8 kW Key Features ? Hygienic, heavy-duty design ? Adjustable thickness of 1-15mm ? Continuous feed conveyor belt ? Stepless variable speed controls ? Easy installation ? Single phase power ? Stainless steel chassis ? Stainless steel blades
used
; ready for immediate use
used
; very good condition, like new
used
Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line ...
used
; mint condition, ready
Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...
used
Hydraulic punching and cut-out machine Indumasch punching force max.: 40 t Blechstaerke max.: 10 mm Stroke number: 150 p / min Punch ing diameter max.: 105 mm working area in transverse direction = x: 1000 mm working area in the direction of loading = y: 750 mm Position accuracy: 0.1 mm Total weight with table approx.: 3500 kg incl. Zubehoer under the river to visit; ready for immediate use
used
Portal bridge SATRONIK HD 4000 CNC web control CNC 3000M - driving along reference limit switch in X and Y direction - double-sided racks for existing track rails for cutting lengths of 13m (16 m racks) plasma inter Lock circuit for a plasma power source plasma system Kjellberg Fine Focus 800 , cut up to 80mm (cutting data see PDF) -suction-cutting table 3200 x 13200 mm - 2 tables a 1600 mm next to each other filter system type DOWNFLO DFPRO 12- ZU 562 (external installation) The system is under current . Dassembly and commissioning on request; ready for immediate use
used
; Delivery time is about 10 weeks
used
; operational as of week 33
used
; very good condition, ready for operation
used
; ready for immediate use
used
; available as of week 20/2014
used
Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33
used
Guide machine Manufacturer: SATO Type: SATRONIK G 1500 Control: CNC 3010 Size: 4000 x 1500 mm Year of construction: 2008 operating hours: 8,090 h (machine on) plasma plasma Source Manufacturer: Kjellberg Type: Hi-Focus 280i Additional equipment: Automatic gas control PGV 3 Year of construction: 2008 operating hours: 728 h (plasma jet on) suction system Manufacturer: Donaldson Type: Torit DCE, DFPRO 6-CYCLO Year of construction: 2008 to visitunder electricity Very good condition mining and commissioning on request; ready for immediate use
used
SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014
used
CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use
used
; ready to use
used
; ready for immediate use
used
Copy: 2400mm wide -burning table: 3000mm x 3000mm The system is under power; ready to use immediately
used
Plasma cutting system for attachment/post-training CNC cutting and plasma cutting FineFocus 800 Plus Materialstaerke: up to 80 mm, hole stitching and quality cutting up to 45 - 50 mm, Gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Special price: 19,900 EUR + VAT ex works Bochum-Wattenscheid plasma cutting plants FineFocus 800or alternatively as FineFocus 1600 cutting up to 160 mm (see systems) plasma cutting systems FineFocus 800 and FineFocus 800/TWIN now with PLUS technology preferably for automated and mechanized cutting in connection with guide machines and robots on all electrically conductive materials; with or without vortex gas, also under water. cutting range up to a maximum of 80 mm material thickness (materi ...
used
; mint condition, ready for use
used
; very good condition, like new
used
SATO FB 3000 Control CNC 801 Power sources 2 x Thermadyne Merlin 6000 a150A Cutting data see PDF Year construction: 1999 cable design for 12m travel distances 12000 x 3000mm Water table: 8000 x 2000mm Many wear parts available, 1 spare burner. ; ready for use
used
CNC plasma cutting machine Euen, 2 x 3 m, year of construction Dec. 2004, Type: Eu-SPP- 2000/3000 PF b with double-sided Bosch-Laengs drive. CNC control: ANC, M767F with DNC interface for CAD/CAM systems, complete system with plasma fine beam cutting system Kjellberg FineFocus 800 to 80 mm (up to 45 mm hole piercing and quality cut), Kemper fuel table and suction filter unit, CAD/CAM system and Buero PC with DNC transfer, year construction year: Dec. as (new price of the plant 140,970 EUR) Price VB EUR +VAT from location; very good condition, as good as new
used
Track width: 2100 mm working width: 1500 mm working length: 3000 mm width: 2650 mm CNC Control Omnicom Explorer Color LCD Display 1 torch Plasma suspension pneumatically moving roller sampling Option : Umruestung to arc removal possible Plasma Burner head Percut 100 incl. Lantek Software Expert 2000 extraction system as good as new . The system is ready for pre-use in our factory hall; ready for immediate use
used
With 2 machine burner hose packs (15m) 1 x Percut 101.-2 1 x quick-release head naehere information on request; ready for use
used
Section floor area 0.61..0.68 1.6m width 3.10m length : 1.5m x 3.0m 700mm high one suction duct A area of application plasma 24 months warranty ; new
used
Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use