concrete cut used for sale

Seydelmann cutter 120 liter Type: K 120 AC 8 Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side The main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine Knives 6 pieces Dimensions: 190x150x180cm Main motor power: 40 kW Voltage: 400 V, 50 Hz Year of production: 2008

Bowl cutter Meissner Type: RSM 325 Condition: Need renovation/used

Bowl Cutter LASKA Type: KR 330-2 Condition: Need renovation/used

Delitech IFOOMA 15 Liter Cutter Stainless Steel used Stainless steel cutter with 3 cutter head and knife shaft brake Two speeds for knife shaft and bowl The bowl is made of solid cast stainless steel and the case is made entirely of stainless steel. Since an auxiliary contactor is currently hanging, the machine does not stay on in 2nd gear. That's why we opened the case and saw the best workmanship here as well. The electronics are also installed in a stainless steel housing, which can be pulled out of the machine on rails to check the fuses, for example. Width: 815mm Depth: 590mm Voltage: 400V Power: 2.4/3kW knife shaft; 0.45/0.55kW bowl drive Knife shaft speed: 1400/2800rpm Bowl speed: 9/18rpm Knives: 3 Bowl volume: 15 liters Weight: 110kg Year of construction: 2016 Machine must be thoroughly cleaned before use. Video about test run available

K+G Wetter Cutter 90 liters SM 90 STL Type 261

Seydelmann K90-DC8 Bowl cutter Serial: 912371 Stainless bowl chopper, 90l capacity, variable speed and timer controls, six blade assembly, with discharge arm, 3Ph

Cutter Seydelmann K 60 U, Machine completely made of stainless steel, 2 speeds, mixing gears, cutter head wrenches, external control box and display, built in 1996, Dimensions LxWxH approx. 160x110x120cm, weight approx. 888kg, good used condition, fully functional, runs smoothly

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

; in stock

Technische Daten: - Schnitthöhe 125 x 125 mm                       100 x 250 mm - Tischabmessung 660 x 700 mm - Sägeblatt FI 450 mm - Motor 5,5 kW / 400 V - Drehzahl 3600 Upm - Schnittgeschwindigkeit is zu 45 Takte/min. - Druckluftanschluss 8 bar - Absaugstutzen FI 120 mm - Sicherheits Zweihandbedienung - CE Konformität - inklusive 1,5 m Rollebahn links und rechts - Abmessungen L=940,B=850, H=1350 mm - Gewicht 410 kg

Technische Daten: - Schnitthöhe 200 x 200 mm - Tischabmessung 1150 x 660 mm - Sägeblatt FI 600 mm - Motor 10 kW / 400 V - Drehzahl 2400 Upm - Schnittgeschwindigkeit is zu 40 Takte/min. - Druckluftanschluss 8 bar - Absaugstutzen FI 120 mm - Sicherheits Zweihandbedienung - CE Konformität - inklusive 1,5 m Rollebahn links und rechts - Abmessungen L=1360,B=900, H=1450 mm - Gewicht 560 kg

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !

Complete Log Cut-off Saw Manufactured by Raute

Bale Cutter Guillotine Blade is approx. 35inch wide

Max.width of cutting: 530 mm Temperature of meat block: up to -20 C Control panel mounted on the machine Instaled power: 4 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 100 Lenght: 165 Height: 195 Delivery time: 30 working days after advanced payment

Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing

Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm

Fogg & Young Bale Cutter

for frozen meat blocks

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Without plug.

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused in box

Unit for precision cutting Make: IMA

Cut to length line Bronx CTL 1-5mm 400-1500 15 MT Material: CR, HR, P&O GALVA Thick (mm): 1,0 – 5.0 Width (mm): 400 – 1500 Weight max: 20 MT Coil Int. Diam.: 508/610/700 Coil Ext. Diam max (mm): 2000 Length Produced (mm): 500 – 4000

Connected load: 1.5kW, including documentation.

60″ x .135″ x 20,000Lb Dahlstrom CTL Line Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Cut to length line Redman 2000mm x 13mm x 20 ton Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Direction: R-L Entry V-Type Coil Car Double Mandrel Uncoiler Hold-Down Roll Hydraulic Peeling Table Driven Pinch Rolls Pinch Rolls Diameter: 330mm Corrective 4-Hi Leveler Nine (9) Working Rolls Work Rolls Diameter: 140mm Hydraulic Work Rolls Adjustment Up and Down Back Up Flights 120HP DC Motor Drive Mechanical Shear with Motor Belt Conveyor with Measuring Head Drop Type Stacker with End Conveyors Electrics, Hydraulics, Controls

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

REF-1059 CHOP CUTTER CRM NEXUS 220 Manufacturer: CRM (COSTRUZIONI-REVISIONI-MECCANICHE) Model: Nexus 220 Year: 2003 Entirely built in stainless steel Power: 4kW 220/380V, 50Hz. Three-phase Inner dimensions: - Max. piece length: 900mm - Max. piece height: 260mm - Max. piece width: 220mm Outside dimensions: Length 2,130mm, width 800mm, height 1,200mm

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2000 mm Sheet Length: 3000 – 12000 mm Electric AC: 380V /50 Hz / 3 phase AC Control Voltage: 110 V Control Voltage: 24 V Double Mandrel Uncoiler Sliding Base Powered Mandrel Expansion Powered ...

Polar 115X guillotine Polar RAB4 jogger + Bizerba scale Polar LW-1000 lift

Wohlenberg 92 Cut Tec Year of construction: 2002 Cutter version with monitor Air table, 2x side tables, spare blades Very good condition! At call!

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Complete cutting system consisting of: - Wohlenberg Cut-Tec 137 - Baumann automatic shaker BOD / L - Baumann unloader BA 3 N Year of construction: 2002 Display has been renewed. Accessories: several spare knives, cutting strips, documentation, etc. The machine was used in a single-shift operation, is ready for use and can be tested on site. Price ex works. "Sold only to entrepreneurs. The object of purchase is sold to the exclusion of any warranty"

1 x Polar N137 Plus guillotine (year 2013), equipped with: air table, 2 side tables, 2 knives, photo cells, program 1 x Polar EL 130-4 unloader (year 2013) 1 x LW 1000-4 stack lift (year 2013) 1 x Polar RA-4 (year 2013)

WOHLENBERG pro-tec 137 with ASE – cutting line  Wohlenberg 137  Year / SN 2007  Airtable  Touchscreen  CIP3 + CIP4 compatible  ASE  Photocells  Program  Sidetable  Baumann NUP 1000 – Stacklifter  Max Sheetfed size: 135cm x 110cm  Baumann BSP 3 L – Vibrator  Papersize: 80cm x 114cm  Baumann BA 3 – 1400 – Unloader  Papersize: 80cm x 140cm  Mettler Toledo Scale

1370 mm Air Photocell Digital Programmed Additional Knife Very Good Condition Immediate Delivery

WaterJet MicroStep Aqua Cut 3001.20 was built in 2005. The waterjet cutting machine allows you to cut sheet metal with a maximum thickness of 120 mm on a table size (L x W) 3300 x 2200 mm. The machine portal is equipped with two heads for water cutting, one of which is rotating. The waterjet is controlled by the MSNC 500 CNC controller. The MICROSTEP Aqua Cut 3001.20 WWr + 4001.20P water cutter is offered with extensive equipment, including: Streamline SL-V 50S Plus oil cooler, ATLAS COPCO FX1 dryer and KKT KRAUS OLB7 cooling unit. The plasma source and the additional head also enable plasma cutting after installing an additional table.