concrete cut used for sale

Inv. Num. : 9090 Type: Trumatic L3030 Producer: Trumpf Created: 2001 Parameters: Maximum power: 3 kW Switch-on hours: 49953 h Laser ON: 48307 Beam ON: 20858 s Work table length: 3000 mm Work table width: 1500 mm Source: TLF 3000 Turbo

Side Tables, Light Barriers, Programmable, Standard Accessories

Holtec mobile cross-cut saw Type PICCOLO Year of manufacture 2011 CE Cutting length of the sword 1540 mm Suitable for cross-sections of max. 1150 x 1150 mm Motor power 7.6 kW, 14.5 A, 400 V, 50 Hz

HORIZONTAL BORING MILL (table type) Inv. No. 13.077A1 Make UMA Model BF56 Spindle diameter Ø 75 mm Taper ISO 40 DIN Table 450 x 560 mm Cross travel (X) 550 mm Drilling height over the table 600 mm Drilling range 55 mm Drilling depth 900 mm Rapid feed for table Longitudinal travel 4 m/min Cross travel 2 m/min Weight 2600 KG Including: Induction-hardened table guides Electromagnetic feed coupling Emergency stop button for rapid traverse and electromagnetic feed clutch Protective covers over the bed 1 hardened sleeve for machine vice, 40 mm opening Auction-ID: A1-45737-138

The machine is in good technical condition, after prior agreement it is possible to test it. Head Precitech - Germany, Source IPG. Dior plates changed this year. Automatic change - 2 tables. Table 3x1.5 m.

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

HORIZONTAL BORING MILL (floor type) Inv. No. 12.019BM Make UNION Model BFP 125-1 Mach. No. 7935/62 Spindle Slide. Ø 125 mm Spindle Taper ISO 50 P.D.B. Horizontal Travel Spindle 1.130 mm Horizontal Travel Column 6.000 mm Vertical Travel Headstock 1,700 mm Cross Travel Column 400 mm R.P.M. 2.24 - 450 (27x) KW 14 Volts 380 Cycles 50 Including: Facing Head D.R.O. Auction-ID: A1-45737-107

HORIZONTAL BORING MILL (floor type) Inv. No. 11.474BM Make UNION Model BFP 125 Mach. No. 10386 Spindle Slide. Ø 125 mm Spindle Taper ISO 50 P.D.B. Horizontal Travel Spindle 1.000 mm Horizontal Travel Column 7.000 mm Vertical Travel Headstock 2,500 mm Cross Travel Column 450 mm R.P.M. 3.55 – 710 (27x) kW 25 Volts 380 Cycles 50 Including: Facing Head Ø 800 mm Auction-ID: A1-45737-101

NC HORIZONTAL BORING MILL Inv. No. 13.033A1 Make SCHARMANN Model WF132AX Table 1,500 x 3,000 mm Spindle diameter 132 mm Taper ISO50 Longitudinal travel table 3.000 mm Cross travel 1,500 mm Vertical travel headstock 1.750 mm W-Axis 950 mm RPM 16 – 1,250 kW 30 Volts 380 Cycles 50 Auction-ID: A1-45737-132

Cutting Machine – Technical Specifications General data: Slide travel: 500 mm Workpiece support height: 500 mm Cutting capacity (oxy-fuel): With 1 torch: max. 300 mm thickness With 4 torches: max. 100 mm thickness With 6 torches: max. 60 mm thickness Cutting capacity (plasma): With 1 plasma torch: depending on plasma system power Speeds: Working speed: up to 12000 mm/min Positioning speed: 15000 / 20000 / 35000 mm/min Gas inlet pressures (oxy-fuel cutting): Cutting oxygen: 11.5 – 12.0 bar (OmniFlow) Preheating oxygen: 9.0 – 10.0 bar (OmniFlow) Heating oxygen: 1.8 – 2.0 bar Air: 5.0 – 6.0 bar Water: 2.0 – 6.0 bar Gas inlet pressures (plasma cutting): All gases: 12.0 bar Description: Industrial cutting machine designed for oxy-fuel and plasma cutting applications. The system supports multiple torch configurations and offers high cutting capa ...

MOBILE HORIZONTAL BORING MILL Inv. No. 11.583B1 Make GIDDINGS & LEWIS Model 230-5 Table 812.5 x 2,812.5 mm Spindle diameter 75 mm Taper MT 5 Horizontal spindle travel Longitudinal travel Cross travel Vertical travel headstock 2000 mm RPM kW Volts 400 Cycles 50 Hz Including: Digital read out Auction-ID: A1-45737-103

Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible.

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 5mm to 300mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex, diameter 210mm; Height adjustment: electric; Altitude display: digital; Feed speed: 4 - 14 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 700kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm;

- Display - Program - Luftitsch - Formica air side tables - Spare blades

Polar 115 X Year 2008 Counter: 830,000 Features: 115 cm cutting width Central air table Sidetable Polar LW 1000 Lift 2 Spare knifes Documentation, tools

- Programm - air table - side table left and right - spare knife

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

• GROWI wood splitting plant • Type: GAS 850 • Year of construction 2025 • Serial number: 2025048 • Stationary firewood processing plant • Hydraulic splitting drive • Integrated chainsaw unit • Longitudinal conveyor belt / discharge belt • Robust steel construction • Control station with hydraulic control • Emergency stop available • CE version • Suitable for professional firewood operation • High work performance • Stable feet • Well-maintained condition • Ready to use • Ideal for forestry and firewood operations Auction-ID: 04C-FSE-3

Total cut counter reading: about 227,500, - ED Program Control, - Color monitor, - Light barrier, - Chrome-plated air table, - Chromed side tables, - Back panel cover, - Cutting length: 92 cm, - Insertion depth: 92 cm, - Insertion height: 12 cm, Year of manufacture: 2001, cutting length: 92 cm, Cutting width: 92 cm, Insertion height: 12 cm, Clamp opening: 12 cm, Construction year: 2001

Wet stone cutting table without manufacturer's information presumably.. CEDIMA CTS, 400 V, disc ø max. 900 mm, EGW. approx. 250 kg, function not tested

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Wet stone cutting table without manufacturer's information presumably.. CEDIMA, 400 V, disc ø max. 600 mm, PE. approx. 180 kg, function not tested

Wet stone cutting table without manufacturer's information presumably.. JUMBO, 400 V, disc ø max. 900 mm, EGW. approx. 250 kg, function not tested

Working width 2000mm - Adjustable width cutting machine - Hudraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16518

Cutting width of up to 5000mm - used for cutting carpets - Width is adjustable (computer controlled) - Everything seen and tested in working condition - also remains until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16515

Compressed air connection 6 bar Auction-ID: A7-46303-29

In full working condition - Working width 2000mm - cutting width adjustable - Hydraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that tests can be carried out before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16517

Working width 4000mm - Cutting widths adjustable - For questions about the machine send your email to info@troostwijkvavato.com Auction-ID: A3-43519-16519

Compressed air connection 6 bar Auction-ID: A7-46303-30

Saw blade diameter: 520 mm Bore diameter: 50 mm Nominal voltage: 400 V Table dimensions: approx. 900 x 700 mm incl. SCHEPPACH ha 1000 extraction Auction-ID: A7-46287-186

Working width 5000mm - Adjustable width cutting blades (computer controlled) - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16516

Two-head angle cutter for metal frame - Calvet brand - 6 meters - works perfectly Sold as is - see photos and video Calvet Double-Head Angle Cutter – General Description The Calvet two-head cutter (also known as a double-head saw) is a precision industrial machine used for cutting metal profiles (steel, aluminum) for the manufacture of frames, windows, doors or metal structures. It allows two ends of a profile to be cut simultaneously or successively, with perfectly identical angles. Calvet is a recognised specialist in machine tools for metal profiles, used in the industrial joinery and steel construction sectors. ⚙️ Working principle Machine equipped with 2 cutting heads (circular saws) A fixed head + a moving head on rail Simultaneous or independent cutting on both sides Allows you to achieve: 90° cuts (straight) 45° cuts (chassis angles) Adjustable intermediate angle ...

Cut length: 550 mm, Cutting height: 95 mm, 92 mm with press bar cover, Residual cut: 32 mm, 60 mm with press bar cover, Insertion depth: 570 mm, Compression: automatic compression, Press load: 200 – 1100 daN, Blade drive: hydraulic, Control: 7 inch touchpad, Connection values: 230 V / 50 Hz / 1.5 kW

Carousel milling machine Comec FGS-1T Number of generators 1 Unit system: milling unit Pneumatic material central clamp Motor power 11kw Rotational speed adjustable by variator Net price

Spit F 40 slot milling machine including accessories and 3 milling machines, wall groove cutter Auction-ID: A7-46327-54

Connection: 230V Auction-ID: A1-46037-2938

Good condition Auction-ID: A7-46327-59

equipped with a breaker and a loading option, The table is in perfect condition, rarely used. After disassembly, it looks the same as before. Auction-ID: A7-46316-2

REMS Bracket No.22 R 1/4\" - 1\" Thread Cutter Thread Cutting Head Auction-ID: A7-46327-227

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Fully functional. Free loading, please call if you have any questions

Working area: 1800 x 1000mm; dimension machine: 2600 x 2100 x 1200mm; automatic material feeder dimension: 2700 x 1200 x 1500mm; Auction-ID: A7-45992-140

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094 Auction-ID: A1-45902-350

\" Mixed lot of disc milling cutters / milling wheels, mainly HSS, different diameters, tooth shapes and designs. Partly with keyway. Included are used milling cutters as well as individual unused / originally packaged parts (e.g. WERKO). • Material: mainly HSS • Design: disc cutter / toothed cutter, mixed • Manufacturer: e.g. WERKO (others not clearly assignable) • Condition: used to mint condition • Quantity: over 100 pieces Weight: • Net weight total: 15 kg \" Auction-ID: A7-46417-175

44× HSK-A63 Tool Holders   mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled.   The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-11