concrete block making used for sale

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 4 pieces -Clamping width: 50 mm -Bore: Ø 30 mm -Price/Delivery: complete -Dimensions: 100/60/H45 mm -Weight: 1.0 kg/piece

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 240 mm / 120° / 3 holes Ø 7 mm -Dimensions: see photo technical drawing -Dimensions: 225/257/H90 mm -Weight: 25.4 kg

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread -Load trestles: lashing point -Shaft mount: M42 -Hole spacing: 220/140 x Ø17 mm, see photos -Quantity: 1 piece -Dimensions: 280/190/H200 mm -Weight: 19.9 kg

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

for milling chucks, spindle head, tool holder, tool carrier -Manufacturer:Diebold, assembly block for assembling and disassembling tool combinations -Arrangement: vertical and horizontal -Mounting: SK40 -Dimensions: 275/160/H180 mm -Weight: 10.5 kg

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RT2024-1BB40 -Number: 4 switches available -Price: per piece -Dimensions: 85/45/H110 mm -Weight: 0.6 kg/piece

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2011-1GA10 -Number: 2x switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.4 kg/piece

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2411-1EA15 -Number: 2x switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.4 kg/piece

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2021-4EA10 -Number: 1x switch available -Dimensions: 100/45/H100 mm -Weight: 0.4 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2015-1BB41 -Number: 1x switch available -Dimensions: 60/45/H75 mm -Weight: 0.3 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, power switch, power contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RT2015-2BB41 -Number: 1x switch available -Dimensions: 70/45/H105 mm -Weight: 0.3 kg

Plummer block housings, bearing blocks -Shaft: Ø 45 mm -Weight: 2.5 kg

for milling chucks, spindle head -for: Assembling and disassembling tool combinations -in: vertical and horizontal arrangement -Recording: SK45 -Weight: 8 kg

Foam block for device installation channel, small flexible foam block -Type: FBA-BK -Item No.: 7202 496 Price: per piece Quantity: 10 available -Dimensions: 75/120/H50 mm -Weight: 1 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: 3RH1911-1HA12 Price: per piece -Quantity: 6 available -Minimum order quantity: complete -Weight: 0.1 kg/piece

Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m

MAX TRUNK DIAMETER 700 MM SUBSTRUCTURE LENGTH 6000 MM CUTTING LENGTH OF 4.8 METERS 5.5 KW MOTOR HYDRAULIC BELT TENSIONING

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Linde, hydraulic control block, control unit, control valve for Linde H30 forklifts -Valves: see photos -Dimensions: 440/185/H900 mm -Weight: 10.8 kg

Finova Portioning & Packaging Line A fully integrated, factory-crated Finova portioning and packaging line designed for precision cheese processing. Built in 2022, this unused system combines cutting-edge technology for cutting, X-ray inspection, weighing, MAP flow pack wrapping, and gas control in a compact, ready-to-deploy format. System Overview Subsystem Manufacturer Description Primary Cutter Finova Cuts 200x600x900 mm or 100x300x500 mm cheese blocks into logs/portions Disassembly & Alignment Finova Converts bars to individual format, aligns for X-ray X-ray & Calibration Finova Inline scanning, volumetric calibration, weight-targeted cut logic Weight Check & Reject Finova Weight verification with automated reject for non-conforming products Portion Cutter Finova Servo-controlled, programmable vertica ...

Auction-ID: A7-46410-43

Auction-ID: A1-46617-153

We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

John Deere front blocks Series 7000, 6000 and 8000 5-600kg on the pallet. Auction-ID: A3-43534-11226

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Auction-ID: A1-41277-853

Auction-ID: A1-41277-850

Height of this unit is 2 meters Auction-ID: A3-43538-5771

Auction-ID: A1-41277-851

Weibert WBBS 555 profi Log band saw The log band saw is intended exclusively for sawing soft, hard, dry and frozen materials, logs or prismatic workpieces. Their length depends on the design of the machine. The material is laid on the supports of the railway path and fastened. The sawing unit is fed manually. Max. trunk diameter 555mm Max. board width 530mm Max. saw blade stroke 540mm Min saw band stroke 20mm Max. cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Impeller-D: 400mm Wheel width: 25mm Saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed. 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-555 Optional: Extension section 2.3m Aspirator Swivel bar

Auction-ID: A1-41277-855

Height of this unit is 2 meters Auction-ID: A3-43538-5770

Auction-ID: A1-41277-854

Auction-ID: A1-41277-849

Auction-ID: A1-41277-63

Auction-ID: A1-41277-62

Recon Part Number: 1203 2972 for gas and diesel Acceptance: ESN 25898 10BV88 SN: 7491538 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1214 1705 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Auction-ID: A7-46939-98

Auction-ID: A7-46939-43

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...

Auction-ID: A1-46933-157