129,477 used machines on RESALE, but how to find them? Machine Search
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Industrial polishing machines Hau and Metabo For sale are polishing machines from HAU and Metabo Metabo 7777 SL63-44 HAU HR4 10948 HAU SMP P850 See photos and installation plan plus accessories/spare parts (a.a. polishing paste feeder) together 4.5 - 5.3 tons. These have been standing unused since 2019 in 58-100 Świdnica in Lower Silesia in today's Poland. Until 2019, these were used in ongoing production in the Munich area and then brought to Poland to continue working with them there. However, the project in Poland was never implemented. Pricing: FOT 58-100 Świdnica, Poland, lashed to pallets. Viewing by arrangement. The photos are still from the original location in Munich. More photos on request
Edge gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-rollers; suitable for cold glue; Glue basin adjustable in height. Edge gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two rollers; used for cold glue; glue reservoir adjustable in hight.
IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.
Used spiral kneader KEMPER, type: ST 75 A -Refurbished - for 120 kg of dough or 75 kg flour - incl. 2 extendable tank wagons - Condition: Very good, ready for immediate use - 6 months warranty Sightseeing and test run are possible by arrangement.
Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is very handy and also protected according to protection class IP65, which means that it can also be used in wet areas without any problems With only five buttons, the SOEHNLE 2790 digital display device is particularly easy to operate. The built-in functions are on/off, tare, clear tare, zero and print. In addition, the 2790 indicator also has a piece counting function. The SOEHNLE 2790 display unit can be operated not only with the 230 V power supply included in the scope of delivery, but also with batteries for up to 100 hours independently of the mains. The 20 mm high digital display is backlit when plugged in and is therefore particularly easy to read. In battery or battery operation, an automatic switch-off can also be set to protect the batteries and batteries. Soehnle ...
Linear brush Tresy for cleaning system Wandres Technical data: • Usable width A (mm): 3200 • Order number: 6732601 • Available: 2 pieces
E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.
DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operating revenue, improves operations with integrated queuing and collection system through various innovative features of the SM-5500B. Experience real retail solutions offered by DIGI's PC scales. • Linerless printing with integrated automatic cutting device • Watermark printing • Speed ID • InfoTag and electronic signage e.Label • Integrated queuing and collection system •Waste management • Interactive screen display Power source 230 V (50/60 Hz.) Operating Humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator display 12.1" Customer Display 7"WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, Dimensions (in mm) 385(W) x 507(D) x 148(H) ...
Product number: 1794 Type: Multipack RC11-80 U Serial number: 04AF353 Year of construction: 2004 Capacity: max 80 packs/min .Glue unit: Nordson Problue 4 hot melt Power: 3 x 400V, 50Hz Dimensions: 7500 mm x 1550 mm x 2900 mm
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann Type : 2x Hydo 24 chocolate depositor 1x hydraulic unit included YOM : 2001 Output : up to 25 cycle/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked
General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional
Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!
The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm
Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg Permissible workpiece masses flying i ...
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Circular saw sharpening machine Vollmer Cne
TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed track 1,300 mm Quill diameter 250 mm ...
Table version for small cartons Label from above Dimensions: 1,100 x 600 x 600 mm high
Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.
Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg
Rosink RFL Front Loader - Powerful water-based cleansing -Modular - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Basic system in stainless steel design -Environmentally friendly Conception With the Rosink RFL front loader, we offer you an economical and user-friendly solution - particularly suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The basis is a 1-bath system, standard with a turntable, which can be expanded to a multi-bath system on request. Depending on the equipment and needs, different programs can be run inside the washing chamber, such as washing, rinsing, drying, etc. Equipment Basic system in stainless steel version 1.4301 Tank with sloping floor Tanks and washing chamber incl. cladding and insulation Slewi ...
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
Industrial Metal and plastic cleaning machine: COLOR-DEC ITALY GREAT CONDITION
Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.
Ceever Spraymaster Turning Spray Washer The Spraymaster series of industrial washing systems are advanced solutions for spray cleaning of small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotary table that allows the parts to be evenly wetted with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, optimizing chemical, mechanical and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Loading: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items - new and used - can be found in our shop! International shipping costs on request!
TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11
REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition
SHUZ TUNG NCR38B tube and profile bending machine was built in 2008 in Taiwan by SHUZ TUNG MACHINERY INDUSTRIAL CO., LTD. The machine, distinguished by its high precision and ease of operation, enables automatic bending and forming of arches from tubes or profiles with a maximum diameter of 38 mm. All process parameters, including even the most complex shapes, are programmed in the intuitive NC controller with memory for up to 500 work programmes. The NCR38B mandrel bending machine is offered with equipment, consisting of, among others, tooling for tubes with 16, 22 and 25 mm diameters. The total weight of the machine is 1500 kg. Technical specifications of the SHUZ TUNG NCR38B tube bending machine - bending capacity: 38×2 mm - bending angle: 0-190° - maximum bending radius: 170 mm - mandrel length: 1800 mm - bending speed: 45°/s - rotation speed: 240°/s - bending accuracy: ...
Code: 0266 Brand: ROBOPAC Model: ROTOPLAT 106/FRD - CE Standard Stretch wrapping machine with rotary table for wrapping pallets, boxes, cabinets and various materials various materials, various sectors such as food, beverages, detergents, chemicals, construction, furniture, logistics and various - CE Standard With loading ramp Rotating table diameter mm 1650 Film tension adjustment Load capacity 2000 kg Rotating plate diameter mm 1650 Clutched reel carriage FRG Table rotation speed rpm 5/12 Height mm 2100 Ascent/descent cycle Ascent/descent cycle only Power supply volt 220/50 Total power Kw 1,4 Overall dimensions: mm 1650 x 2600 x2700 h Weight kg 450
MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700
Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer; MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...
LINX-SL501-CO2-Laser Engraving machine equipped with fume extraction unit. Machine in perfect working condition. LINX SL 501 is one of the fastest Laser marking machines ever, it makes 90 marks per minute and its developed for the line productions for marking glass, papers, plastic and other non metal parts, As well metal, but just taking coloured skin out.
Bag width up to 20 cm, Bag length up to 32 cm, machine in production
Machine in running, tail end printer could be added
Code: 0273 Brand: LEVIGALTECNICA Model: 3R / 600 Dry burring, honing and calender machine for the superficila finishing of blank, punched, laser or plasma-cut materials presenting burrs, which because of aesthetics and/or safety reasons, must be removed Technical data: Max working width 650 mm Min workable thickness 0,5 - 1 mm Max workable thickness 150 mm Abrasive belt motor power 7,5 Hp Belt motor power 1 Hp Bench lifting motor power 0,75 Hp Automatic table positioning Height display Variable belt speed Vacuum table 1° Roller group diameter 100 mm 2° Roller group diameter 100 mm 3° Roller group diameter 120 mm Suction inlet diameter 120 mm Compressed air 7-8 bar Overall dimensions mm 1500 x 2700 x 2200 h
MACHINE IS IN GOOD WORKING CONDITION Machine need center horse and support for the clamp cutting tools. Bj0ie7dcoa Machine Has ben used in Switzerland, after thay realize they need that both suports, they took it off and use on other lathe.
BLISTER PACAGE FORMING MACHINE LIMPIR Machine is in perfect working condition We use machine durring production of switch production paccaging switches.
Professional strapping machine with internal frame dimensions of approx. width 1050 x height 800 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Belt width from 8 to 19 mm possible according to manufacturer specifications, 12 mm tape roller mounted. -Up to 24 strapping per minute possible. -Strap tension adjustable from 50 to 1200 N. -Manual start via hand button or stable foot switch / Alternatively automatic operation selectable (sensor in the table top). -Equipped with ergonomic casters on the table surface. -Closure type: Welding in the heating wedge method. -Automatic tape threading. machine can be moved via castors. -230 V / 50 Hz. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine can be demons ...
Pacage set of REHM TIG WELDING MACHINE Welding torch 10m welding gun covers 3 different sizes look photos Suitcase for the complete set included Gun for electrode mma welding
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.
On offer is a used Delta LF 350 vertical cup grinder The machine is in a well-maintained and functional condition. It is ideal for precise surface and cup grinding of metal parts – perfect for workshops, maintenance or toolmaking. ⸻ Technical data (approx. information): • Model: Delta LF 350 • Type: Vertical cup grinder • Grinding range: approx. 350 × 155 mm • Grinding height: approx. 280 mm • Grinding wheel Ø: up to 200 mm • Spindle speed: approx. 2,800 rpm • Drive power: 3 kW • Connection: 400 V / 50 Hz • Weight: approx. 450 kg ⸻ Equipment: • Magnetic clamping plate • Coolant device / wet grinding device • Splash cover • Manual delivery • Grinding wheel & tools included • Documentation / instructions available ⸻ Condition: • Technically flawless, ready for immediate use • Visually well-maintained, normal ...
maximum number of results exceeded
please refine your search
