138,540 used machines on RESALE, but how to find them? Machine Search
KVM 105x125 Block/Paving Stone Machine 2008. The machine is in very good condition, It is still in production and can be seen after appointment. It has face mix (2 layer concrete).
Paving stone finishing plant - shot blasting machine DISA type BT 125-188 - Beam hours 229 - Permissible document width 1250 mm - Permissible passage height 500 mm - Throughput speed 2-10 m/min - Wheel diameter 380 mm - incl. ventilation system
Manufacturer: Normet Model: Norrunner Type of machine: Concrete spraying machine Year of manufacture: 2017 Power: 425 kW Total weight: 31720 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50065-166
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50065-266
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50065-66
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-66
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-166
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-266
74cc, 2 stroke, maximum speed 9500 rpm, fuel tank capacity 1100ml, maximum cutting depth 125mm, bore diameter 25.4mm Auction-ID: A1-40898-1033
4x concrete drill bit 110 mm: 5 / 5.5 / 6 / 7 mm 5x concrete drill bit 160 mm: 5.5 / 6 / 7 / 8 / 10 mm 2x concrete drill bit 210 mm: 8 / 10 mm 1x concrete drill bit 260 mm: 14 mm 1x pointed chisel 140 mm 1x pointed chisel 250 mm 1x flat chisel 140 mm: 20 mm 1x flat chisel 250 mm: 20 mm 1x scraper chisel 250 mm: 40 mm 1x Mbox1 Case Auction-ID: A1-40898-377
4x concrete drill bit 110 mm: 5 / 5.5 / 6 / 7 mm 5x concrete drill bit 160 mm: 5.5 / 6 / 7 / 8 / 10 mm 2x concrete drill bit 210 mm: 8 / 10 mm 1x concrete drill bit 260 mm: 14 mm 1x pointed chisel 140 mm 1x pointed chisel 250 mm 1x flat chisel 140 mm: 20 mm 1x flat chisel 250 mm: 20 mm 1x scraper chisel 250 mm: 40 mm 1x Mbox1 Case Auction-ID: A1-40898-179
4x concrete drill bit 110 mm: 5 / 5.5 / 6 / 7 mm 5x concrete drill bit 160 mm: 5.5 / 6 / 7 / 8 / 10 mm 2x concrete drill bit 210 mm: 8 / 10 mm 1x concrete drill bit 260 mm: 14 mm 1x pointed chisel 140 mm 1x pointed chisel 250 mm 1x flat chisel 140 mm: 20 mm 1x flat chisel 250 mm: 20 mm 1x scraper chisel 250 mm: 40 mm 1x Mbox1 Case Auction-ID: A1-40898-378
74cc, 2 stroke, maximum speed 9500 rpm, fuel tank capacity 1100ml, maximum cutting depth 125mm, bore diameter 25.4mm Auction-ID: A1-40898-1043
Type/Function: Set of construction concrete mixers with tilting tank Quantity: 4 visible units Equipment: Tilting tanks, flywheel control, ring gear drive, wheeled chassis Auction-ID: A1-50088-12
Stihl TS 700 cut-off cutter - year of manufacture 2021 Blade 350 mm - TESTED and TESTED Auction-ID: A3-46125-10865
Professional STOW CS8CE20H20 concrete/floor saw, year of construction 2011, serial number ZE0306510. Equipped with a Honda GX620 V-Twin petrol engine with an output of 14.9 kW and a nominal speed of 3,600 rpm. Own weight approximately 173 kg. Mobile version, suitable for sawing concrete, asphalt and other paving materials. Machine is currently not working and is offered in non-working condition, for recovery or parts. Used condition with visible signs of wear and rust; See photos. Auction-ID: A3-46125-22070
Engine starts, without height control lever Auction-ID: A3-46126-6245
Mulder-Boskoop industrial concrete mixer with autonomous diesel engine, intended for the preparation and mixing of concrete on site. Robust equipment mounted on metal chassis and including: Large steel mixing tank Autonomous diesel engine Hydraulic drive Loading hopper Unloading chute Hydraulic system with hoses and fittings Auxiliary Tank Access Ladder Side platform Reinforced industrial chassis Manufacturer plate Mulder-Boskoop Serial No.: 2899 Mixer number: 2113075 Auction-ID: A3-46125-37255
Cutter TS700 (top model) - blade 350 mm - TESTED and TESTED Auction-ID: A3-46125-10866
Equipped with ladder and platform As well as metal trestle with ladder and platform Auction-ID: A1-50251-432
NEW PRODUCT IN ORIGINAL PACKAGING There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-36
Technical data Manufacturer: Husqvarna AB Type: FS 400 LV Product Ref: 967796501 Serial Number: 2021 2130056 Power: 8.7 kW Weight: 102 kg Max. saw blade diameter: 500 mm Saw blade speed: 3,000 rpm Drive: Combustion engine Configuration Hand-held floor cutter or concrete saw with chassis, cutting depth adjustment via handwheel, front guide indicator, saw blade protection and emergency stop. Auction-ID: A7-50403-30
We offer you a Glaap & Brinkmann screed machine Mixman D4BS neo from a current recycling. Year of Make: 2022 Condition: used Original price: 41.500,00 Euro Equipment / accessories / other information: Hatz diesel engine, engine power 42 kW, feeder + scraper, NEO hood Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 32832 Augustdorf The sale is without warranty Subject to prior sale
74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-50533-359
74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-50533-360
- Manufacturer: Putzmeister - Machine Type: Rotor Concrete Pump - Presumed pump type: Putzmeister R 65 - Flow rate: up to approx. 40 m³/h - Max. delivery pressure: approx. 25 bar - Rotor delivery hose: approx. Ø 125 mm - Drive: electric - Motor power: approx. 45 kW - Voltage / frequency: 400 V / 50 Hz - Hydraulic tank: approx. 100 litres - During inspection, the hydraulic tank appeared to be about half full. - Before commissioning, a service including inspection or renewal of the hydraulic oil is recommended. - Operating hours: Approximately 750 operating hours are noted on a service/maintenance sticker from 2022. - The current operating hours are not known. Since 2022, further operating hours may have been added. - According to the seller, the machine was originally purchased for a project, but not used. - Accessories: The hoses recognizable in the pictures are part of ...
Wacker BFS 1345AL Floor Cutter Manufacturer: Wacker Construction Equipment AG Model / Type: BFS 1345AL Machine Type: Floor Cutter / Floor Cutter Year of construction: 11/2003 Serial number: 1474146 Operating weight: 135 kg Engine: Honda GX390 QWA4 Engine type: 4-stroke gasoline engine Engine power: 9.6 kW at 2,670 rpm Engine Number: GCAA-3751279 Cutting blade: diamond cutting blade Ø 450 mm Application: Cutting asphalt, concrete and similar building materials Maintenance: Annual inspection according to manufacturer's maintenance schedule Condition: Used Signs of use: Signs of wear due to age and durability, paint wear, scratches and corrosion in places Auction-ID: A1-50369-6123
74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-50534-359
74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-50534-360
-10m³ mixer -Without auxiliary motor -Water tank -Belgian registration documents Auction-ID: A1-49345-47
Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus ...
used
technical data: Make: Möhringer Type: for block pull kW: 5 kW Rpm: 34 rpm, 40% ED Shaft diameter motor: 50 mm
BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at
used
6 STANDS ROD FINISHING BLOCK WITH 3 UPPER & 3 LOWER UNITS IN A V-SHAPE 170 MM DIAMETER DISCS TO PRODUCE DIA. RODS OF 5.5 TO 12 MM, 60 M/SEC.,
used
NEVER INSTALLED! - IS DESIGNED TO USE 170 MM DIAMETER DISCS TO PRODUCE RODS OF DIAMETER 5.5 UP TO 12 MM.
new
Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...
RECON Part number: 303120B ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
RECON Part number: 0405 2744 engine number: 7300533 ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
RECON MWM TBD604-BV12, MWM TBG604-BV12 Part number: 1204 7301 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 300094 Engine number: 3269801 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
maximum number of results exceeded
please refine your search
100 € 
