130,801 used machines on RESALE, but how to find them? Machine Search
Maschine zur Belüftung von Sahne. Effizient, in sehr gutem Zustand. Bei Interesse nehmen Sie bitte Kontakt mit mir auf.
Brotschneidemaschine verwendet. Sehr guter Zustand.
Balestrini linear milling machine two milling units pneumatic pressure of elements
Machine number 6418106052 material discharge length approx. 1600 mm with feed length approx. 2200 mm max. material span approx. 250 mm (measured) max. material clamping height approx. 200 mm (measured) with discharge roller conveyors, 2 pieces each approx. 1000 mm length max. load t/m total material removal length approx. 4000 mm with spare saw blades, approx. 8 pcs.Reference : Prologtec Lot 3
Table dimensions: approx. 410 x 360 mm (inside ) with machine vice, jaw width: approx. 125 mm with swivelling work table Reference: Hansmann - Lot 34
3 stages, 380 V 50 Hz Connected load: 10.5 kVA Rated current: 16 A
1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!
Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays
Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m
Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg
Serial number: 22320321 Travel X-axis: approx. 500 mm Travel Y-axis: approx. 750 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 1200 x 840 mm incl. documentation, calibration ball, touch probe and hardware Reference: Schmidt - Lot 89
With extraction; Suction line to the valve
Coordinate grinding machine for precise grinding work in tool and mould making. Table travel: 400 x 200 mm Equipment: several grinding motors Accessories: various turbines Speed range: up to 225,000 rpm The machine is ideal for fine contouring, drilling and fitting work where high accuracy and clean surfaces are required.
Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional
Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 43
Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;
X-travel: 600mm, Y-way:450mm, Z-travel: 450mm; Machine Number: 14772; Table size approx. 800x460mm; Speed max. 10000 rpm, 30-fold tool changer, Tool holder: SK40; Max. table load: 1000kg; Control: Heiden-Hain: TNC430 ; incl. tool cabinet, equipped with tool holders and tools; incl. chip conveyor
Incl. peripherals and documents Dismantled for transport Video available!
Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price
Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.
Exhibition machine, unused. • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With special tool set Sheet thickness 4 mm Roll diameter 125 mm Projection 200 mm Total power requirement 2.2 kW Machine weight approx. 0.48 t Dimensions approx. 1.6 x 0.6 x 1.2 mm
Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.
Jaw width: 125 mm Reference: Hercegfi - Lot 5
Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse
Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)
Sollas Bandum 25, untested, as spare part donor
Operating voltage: 220 -240 V Frequency: 50 Hz Speed: 1000 - 3800 rpm incl. various matching accessories
Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.
Grinding machine XXIII DH3 ready for use from site in actual condition
Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration
The butt welding system is equipped with a welding machine from the manufacturer Manufacturer: Castolin The device type is used Totalarc 3000 . Welding machine: ABK Castolin Type: Total Arc 3000 Max welding power: 270 A
Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm
4000 x 2000mm 6000w with auto pallet changer
Belt sander from MAFAC ; TYPE K 100 BJ 1979 and a double sander from BOSCH, incl. replacement sanding belts
incl. high-frequency sander from the manufacturer COOPER, type: BL-2B, year of manufacture: 2006
Equipped with: adjustable drilling table
maximum number of results exceeded
please refine your search
