134,065 used machines on RESALE, but how to find them? Machine Search
Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg
Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.
Control Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes
The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible.
Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 850 kg,
Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 175 kg,
consisting of: automatic glass retraction, Fabr. HEGLA, Type: ISO, Ser No. 2033401055, glass washing and drying station, Fabr. LISEC, Type: VHW-F29/V8, YOC 2022, Ser-No. 315117/944, Glass transport station, Fabr. LISEC, Type: RTVB1527MZU2, Year 2019, Ser No. 383109341, visiting station, Fabr. LISEC, Type: RSV-38/27B, Year 2019, Ser No. 320-109338, Press Unit, Fabr. LISEC, Type: FPS-35/27U2, Year 2019, Ser-No. 343-109342, Frame Conveyor, Fabr. LISEC, Type: FR-400H, Year 2019, Ser-No. 550-109339, Dam system with sealing system, Fabr. LISEC, Type: VSL-10-27, Ser-No. 100170 with 2 stowage sections, dead weight: 4500 kg, as well as separate control/control cabinet system with cooling system, Fabr. RITTAL, control unit, dosing unit, pump and valve technology, max. working height of the system: 2700 mm
Process Vessels Manufacturer: Becomix Type MV 250 Year of manufacture 2015 never in production Usable volume capacity 250 l Vacuum and flameproof -1/+2 bar Operating temperature 20-134 °C Boiler room Pressure-resistant 0-4 bar Operating temperature 20-152 °C Turbo dissolver vibrator with integrated CIP pump, speed-adjustable with frequency converter Cip ball, mobile Soaking liquid, soaking powder powder Mirror-polished version, mobile Pharmaceutical version. Qualification documentation is available.
4 controlled axes for profile processing X-axis travel: 7,200 mm A-axis rotation: 0°-180° Speed range: 0-18,000 rpm Tool changer with 8 places on the machine plus additional tool changer in bed Automatic tensioner shift Profile machining Generation X, with Schüco CAM software and controllable About SchüCal+ - Calculation Program Operating hours: Machine in: 15605 hrs / NC in: 3691 hrs Accessories / Equipment: Standard Tool Set (Used) 5.5 KW Spindle (New spindle frequency converter) (New PC / Controller) The machine is overhauled, dimensioned and available for immediate delivery. Weight: approx. 5,000 kg
1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm
Offer 26098 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° to : around 130 mm - Square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade infinitely variable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydr. Material vise, infinitely adjustable clamping pressure - Hand crank for fine adjustment - Restraint adjustable - Coolant device - Discharge roller conveyor with dimension stop 5000 mm - Feed roller conveyor 4000 mm - Space requirement approx. W 800 x H 1770 x D 1020 mm - Weight approx. 950 kg
Generators with diesel engine Engine Type: Perkins 4006-23TAG3A Power: 900 kVA Year: 2014 Hours: 1176 Cooling: Water with front-mounted radiator Speed: 1500 1/min Generator: Stamford HCI 634G1 Voltage: 400/231 V, 50 Hz Subject to prior sale - errors possible! Internal Reference Boom: E-1004-113
Height=1.23 m, Overall length= 2.27 m, Overall width= 1.03 m, Net weight= 143 kg,
A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.
Key data: 30 mm, 30 mm, 80 mm
Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop
Key data: 6000 mm, 1200 mm, 1800 mm
Basic machine data Used 7-axis mill-turn machining center from MATEC Make: MATEC Type: 50HVU Year of Make: 2011 Condition: Mint Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR410 Travels: x-travel: 6000 mm // y-travel: 1200// 1400 mm // z-travel: 1800 mm Technical data: • A-axis: infinitely variable, horizontal / vertical • B-axis: infinitely variable • C-axis: rotary table with rotary function 200 rpm • Spindle: 20-8000 rpm • HSK A-100 interface • 60-fold tool changer • Rigid table: 1235 mm width • Positioned dividing head for shaft machining • IKZ (internal coolant supply) • 2 x chip conveyors • Infrarottprobe The machine is in mint condition. Machine has only 2450 PGM hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
Key data: 730 mm, 730 mm, 850 mm
Basic machine data Used 4-axis horizontal machining center from MORI SEIKI Make: MORI SEIKI Type: NH5000 DCG Year of Make: 2011 Condition: Mint Control: Name: FANUC 32iA MAPPS Travels: x-travel: 730 mm // y-travel: 730 mm // z-travel: 850 mm Technical data: • Spindle: max. 14000 rpm • HSK A-63 Tool Holder • 60-fold tool changer • Feed speed: 50 m/min • Rapid traverse: 50 m/min • B-axis indexing: 360° • 2 pallets • Pallet dimensions: 500 mm x 500 mm • Max. workpiece size: 800 mm x 1000 mm • 680 l IKZ • Chip conveyor The machine is in mint condition. Machine has only 5203 PGM hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
The machine is in good technical condition, testing is possible by prior arrangement.
Key data: 750 mm, 400 mm, 500 mm
Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Commercial vacuum cleaner KÄRCHER Professional NT 35/1 Tact, max. 2,200 W
Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm
NIKON Profile projector V-12 V12 Profile Projector with 5 Lenses: 5X / 10X / 20X / 50X / 100X Untested equipment For parts
Measuring range: - Standard mode 200 × 200 mm - Precision mode 125 × 125 mm Measurement repeatability: up to 0.5 μm Photoelectric sensor measurement Lighting system: transmitted light and ring light Storage: 500 GB hard drive Interfaces: 1 × LAN, 4 × USB 3.1, 2 × USB 2.0 Power supply: 240 V
The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left
Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm
Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures
Industrial vacuum cleaner PROTOOL VCP360E-MAC
Bridge type Machining Centre ISPER HASP 643 WAVE - 30.000 rpm - travel 650x420x350 mm - CNC SELCA 4045D, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 700x400 mm, Longitudinal travel x axis: 650 mm, Cross travel y axis: 420 mm, Vertical travel z axis: 350 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 20.000 mm/1, Rapid feed x-y-z axes: 20.000 mm/1, Spindle taper type: HSK 40-E, Automatic tools change nr.: 20, Spindle speed: 0- 30.000 rpm, Spindle motor power: 8 Kw, Cnc: SELCA 4045D, Approx net weight: 4.500 Kg, Accessories: Chip conveyor, RENISHAW Probe
This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details.
Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details.
Wood production line manufactured in 2017. This BURKLE Optima 1428/50 includes a continuous-action stack press with a pressing area of 1400 x 2800 mm and an automatic feeding system. It also features a robust panel rack and two tilting hoppers with a capacity of 1.5 m³. If you are looking to get high-quality door panel production capabilities, consider the BURKLE Optima 1428/50 machine we have for sale. Contact us for further details.
Wood production line manufactured in 2004. This CEFLA Spraybotic MD features an automatic spray arm with 4 spray heads and a pump station equipped with 5 Graco coating pumps. The passage width is approximately 1350 mm, making it suitable for various coating applications. If you are looking to get high-quality coating capabilities, consider the CEFLA Spraybotic MD machine we have for sale. Contact us for further details regarding this machine.
Set of 10 tool trolleys, complete with all tools as in the photo, chrome vanadium key quality, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1800 mm Weight: 790 kg Auction-ID: A7-45833-153
Several Wafios wire processing machines with two payoffs are available. 1) Wafios N90, year of manufacture: 2003. Including payoff Wafios AHL 41 D-M, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N6. 4) Wafios N5. 5) Wafios N4. 6) Wafios N4. 7) Wafios payoff AHL 41 DR, year of manufacture: 1998. 8) Wafios payoff AHL 41 D, year of manufacture: 1997. All machines including payoff. An on-site inspection is possible. Individual sale possible.
Set of 10 tool trolleys, complete with all tools as in the photo, chrome vanadium key quality, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1800 mm Weight: 790 kg Auction-ID: A7-45833-195
PROTEIN MACHINE TYPE MICROPLATE READER BIO-TEK 800 TS Absorbance Reader with Gen5RC 1 Unit Detection modes: Absorbance Microplate types:6- to 384-well plates Temperature control: To 50 °C (I” configuration) Read speed:11 secs /96 wells (sweep mode) Brand: BioTek With Computer UPS 1.0KVA CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove.com
Lot consisting of 2 trolleys \"in their original state\", complete with tools and accessories as in the photo Overall dimensions: 1200 x 700 x 1000 mm Weight: 170 kg Auction-ID: A7-45833-82
Lot consisting of 2 trolleys \"in their original state\", complete with tools and accessories as in the photo, never used Overall dimensions: 1200 x 700 x 1000 mm Weight: 170 kg Auction-ID: A7-45833-265
Set of 5 tool trolleys, complete with all tools as in the picture, chrome vanadium quality keys, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1000 mm Weight: 350 kg Auction-ID: A7-45834-242
Lot consisting of 2 trolleys \"in their original state\", complete with tools and accessories as in the photo, never used Overall dimensions: 1200 x 700 x 1000 mm Weight: 170 kg Auction-ID: A7-45833-202
Digital Scale, never used Overall dimensions: 400 x 300 x 500 mm Weight: 5 kg Auction-ID: A7-45833-146
Set of 10 tool trolleys, complete with all tools as in the photo, chrome vanadium key quality, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1800 mm Weight: 790 kg Auction-ID: A7-45834-195
maximum number of results exceeded
please refine your search
125.000 € 
