133,801 used machines on RESALE, but how to find them? Machine Search
FILLETING MACHINE FOR MACKEREL, VMK Technical description: Belt width:70 mm Power supply: 220/380 V, 50/60 Hz Total dimensions: 2360 x 800 x 1680 mm
x-travel: 1300 mm y-travel: 610 mm z-travel: 600 mm taper: Aufnahme 50 Axis: 3 control: Heidenhain 530 : : ja : 20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amplification -fold: 100 diameter: 560 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 350 t dimensions of the machine ca.: 650 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 75 (800) mm : 60 (750) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 100 x 11 (1000) mm Axis diameter: 80 mm work speed: 6,0 m/min Tool diameter: 242 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm L-beam: 20 x 20 x 4 mm flat steel: 25 x 6 mm Axis diameter: 20 mm work speed: 11 U/min total power requirement: 0,2 kW weight of the machine ca.: 80 Kg dimensions of the machine ca.: 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 1015 mm material thickness: 1 mm speed: von Hand weight: 240 Kg dimensions: 1420 x 600 x 750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 305 mm material thickness: 1,0 mm speed: von Hand weight: 45 Kg dimensions: 500 x 340 x 420 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 (600) mm : 35 (900) mm L-beam: 50 x 50 x 5 (800) mm T - beam - web outwards: 60 x 7 (600) mm Axis diameter: 50 mm work speed: 4,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 mm : 35 mm bar material dia. max.: 70 x 2 mm rectangle: 60 x 60 x 3 mm flat steel: 60 x 10 mm Axis diameter: 50 mm work speed: 4,3 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,9 x 0,95 x 1,4 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm
The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance unknown, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7.0 ...
FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.
HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier ...
FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.
FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...
FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm
Two similar Netzsch progressive cavity pumps are available. Power: 15kW, max. delivery pressure: 8bar, delivery rate: 1000l/h, speed: 1450rpm, max. viscosity: 1000Pas. One of the machines is mobile. On-site inspection is possible.
1) 3x 500l stainless steel container. 2) 9x PVC lids for stainless steel containers, diameter: 1120mm, lid thickness: 20mm. 3) Telescopic table, length range: 1650mm-6800mm. 4) Stirrer. 5) Drying and screening cabinet, machine dimensions X/Y/Z: approx. 1250mm/1200mm/800mm.
A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.
Two old Mitutoyo and Nikon projectors are available. 1) Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. 2) Nikon V-12, projection screen: 305mm, rotation range: 360°, lens compatibility: 10x/20x/50x/100x, resolution: +/-0.1%, max. workpiece height: 100mm, weight: approx. 80kg. On-site inspection is possible.
Stainless steel tanks Manufacturer: SAV Type 20062 Capacity 2260 litres Year of construction 2000 Operating temperature product room 95 °C Double jacket for heating and cooling, pressure-resistant up to 8 bar Material V4A
Inv. Num. : 8429 Type: Bluestar 6 Producer: HÜLLER-HILLE Created: 2006 Parameters: Work table length: 630 mm Work table width: 630 mm X-axis travel: 700 mm Y-axis travel: 630 mm Travel Z axis: 700 mm Max. tool diameter: 150 mm Max. tool weight: 10 kg
Used PP twine production line made by Roblon, type: T5000. Capacity ranges from 60 to 100 kg/h depending on twine thickness. THE LINE INCLUDES: - A 90mm diameter extruder with an inverter-controlled asynchronous motor, - A control cabinet with digital controllers, - A cast-in die head, - A longitudinal orientation oven for polypropylene rafi, - A single-reel winder, - A twister for winding finished twine balls, - A heating tunnel for shrinking the film on finished balls.
Fully automatic production line for the manufacture of FFP2 dust masks (KN95). Stable and efficient production of single-use dusk masks with FFP2 protection class (KN95) and made of 4-5 layers of material. Production procedure: Material feeding from roll (up to 5 layers) | feeding, cutting and ultrasonic welding of the nose-bridge | ultrasonic welding of the ear strap | folding and shaping of the mask | ultrasonic welding of the mask edges | punching (separating) and ejection. The tension of the feed materials can be controlled separately for each material. By changing the templates, masks of different sizes and styles can be produced. Controlled by Mitsubishi PLC, operation via Weinview touch screen. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | power: 8kW, 220V | machine dimensions L6000xW1000xH1800mm | weight: 1500kg. Video on YouTube:
Fully automatic production line for the manufacture of surgical masks. Stable and efficient production of single-use surgical masks made of 3-4 layers of material. After welding the layers on top of each other, the production for welding the ear straps is expanded to 2 lines to achieve a constant high output. PLC control, operation via touch screen. - Specifications: max. speed of the machine in neutral: 65 cycles/minute (corresponds to 130 masks/minute) | mask dimensions: L175xW95mm | power: 9kW, 220V | machine dimensions L6500xW4500xH1900mm | weight: 1800kg. Video on YouTube:
Storage tank 1000 ltr., stainless steel, with double jacket, 2 spouts and level gauge, as good as new condition
Control Winmax Travel X/Y/Z 2135 x 865 x 762 mm Spindle speed 12,000 min-1 Tool magazine for 40 Wkz., SK 40 Handwheel Ultimotion IKZ 40bar Probes Renishaw Conveyor
For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.
Mixing and homogenizing plant capacity 50L Pre-melting tank 50L extra price Euro 6.500,--
Inv. Num. : 8440 Type:- Producer:- Generated: Parameters: Capacity: 400 1/min Components: Mixer Dump truck 3 bowls Press Gas oven Machine
100 litre process tank Manufacturer : Hermann Waldner Content: 100 litres Technical specifications : cylindrical standing stainless steel tank with double jacket, insulation and agitator Material container 1.4435 Operating temperature 80 °C Material double jacket 1.4404 Pressure-resistant 2.5 bar Operating temperature 90 °C Capacity 22 litres Equipment: Propeller agitator Spout at the bottom center Agitator from above Documents: Nameplate
: 35 (800) mm : 35 (1200) mm L-beam: 50 x 50 x5 (850) mm flat steel: 60 x 10 (800) mm Axis diameter: 50 mm work speed: 4,5 m/min roll diameter -toolpieces: 155 mm total power requirement: 1,5 kW weight of the machine ca.: 0,9 Kg dimensions of the machine ca.: 0,6 x 0,9 x 1,35 m Profile bending machine with: - Foot pedal for right/left rotation - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm flat steel: 50 x 10 mm L-beam: mm Axis diameter: 30 mm work speed: 6,0 U/min roll diameter -toolpieces: 132 mm total power requirement: 0,75 kW weight of the machine ca.: 0,25 Kg dimensions of the machine ca.: 0,6 x 0,8 x 1,3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table
Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Table size 1,020 mm × 510 mm Table load max. 1,000 kg Spindle holder SK 40 (DIN 69871) Spindle speed max. 10,000 min⁻¹ Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Iobjwt Rfwstfb Tpmjic Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Rapid traverse (X / Y / Z) 24 m/min / 24 m/min / 20 m/min Feeds programmable up to approx. 7,600 mm/min Control HURCO Ultimax 4 Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m
Year of manufacture 2007 Travel X 1270 mm Travel Y 660 mm Travel Z 610 mm Table size 1500 mm × 660 mm Table load 1300 kg Spindle speed up to 12,000 min⁻¹ Spindle drive approx. 18 kW Tool holder SK 40 Tool Stations 24-Fold Tool Changer Rapid traverse (X/Y) 30 m/min Rapid traverse (Z) 20 m/min Machine weight approx. 9000 kg to 9500 kg Machine dimensions (L×D×H) approx. 3.25 m × 2.35 m × 2.95 m
1000L Stainless Steel Tank | Forming Technology Hausach | UN Approval | V4A 1.4571 | used For sale is a used 1000 liter stainless steel tank from the company Umformtechnik Hausach GmbH. The tank is made of high-quality stainless steel 1.4571 (V4A, AISI 316Ti) and has UN approval (UN 31A/Y/11) for the storage and transport of dangerous goods. Ideal for applications in the food industry, chemical, agriculture or industrial storage. The tank is in well-maintained condition, tight, clean and ready for immediate use. It has a sturdy tubular frame construction with forklift pockets and a secured dome lid. ⸻ Specifications: • Capacity: 1000 liters • Material: Stainless steel 1.4571 (V4A, acid & chemical resistant) •Ab. Total weight: 2100 kg • Curb weight: 228 kg • Minimum wall thickness: 1.5 mm •Ab. Filling/emptying pressure: 0.10 bar • Test overpressur ...
The machine is in good technical condition, a test run is possible by prior arrangement.
Manufacturer: LASM Model: LS-2N1A Year of Manufacture: 2001 Type of Machine : profile sander with 2 sanding belts and one abrasive wheel station Technical Specifications: - Max workpiece thickness: 80 mm - Min workpiece length: 100 mm - Overall Dimensions: 4400 × 1400 × 1900 mm - Net Weight: 1200 kg Sanding Belt Units (x2): - Two-speed motor - Unit articulation: 135° - Belt dimensions: 80 × 2450 mm - Belt speed: 7–14 m/sec - Pneumatic belt tensioning - Mechanical oscillation - Pad movement timer (exit/return) - Air blowing system (belt cooling & cleaning) Abrasive Wheel Unit (x1): - Single-speed motor: 2 HP - Unit articulation: 180° - Max wheel diameter: 220 mm - Shaft motor diameter: 30 mm - Feed track speed: 5–25 m/min (variable) Find more here - / Contact us at -
2.000 litre, Stock number: T3986, Litre: 2.000 , Material: Stainless acid proof steel 1.4404, In stock: Yes, Amount in stock: 2 pc., Item: Tank, Lying: Yes, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top , Agitator: Yes, Agitator type: Frame agitator with scrape, Motor: 2,2 kW - 230/400 Volt - 9 rpm., CIP: Yes, 3 pcs., Working temperature: 20 - 143° C, Working pressure tank: 0 bar, Working pressure double jacket: 3 bar, Inner diameter: Ø 1050 mm., Outer diameter: D 1200 mm., Dimensions: L 3200 x W 1500 x H 1900 mm., Total height: 2100 mm., Manufacturer: Kronjysk Stål ApS, Model/type: 81956, Year: 2003
360 litre, Stock number: T3988, Litre: 360, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 420 mm., Working temperature: 0-20° C, Working pressure tank: 3 bar, Working pressure double jacket: 4 bar, Inner diameter: Ø 700 mm., Outer diameter: D 760 mm., Total height: 1650 mm., Manufacturer: Vamdrup Rustfrit Stål, Year: 1993, Other: Prepared for magnet stirring in the bottom
250 litre, Stock number: R1226, Litre: 250, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Mixer, Amount in stock: 1 pc., Standing: On legs, Top: With bridge and lid, Bottom: Dished, Double jacket: Yes, electrically heated, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Frame agitator with scrape in the top, Agitator type 2: Homogenizing agitator in bottom, D 125 mm., Working pressure double jacket: 60 PSIG, Inner diameter: Ø 760 mm., Outer diameter: D 980 mm., Total height: 2000 mm., Manufacturer: Surmet, Year: 1980
Stock number: F1102, Size: L 460 x W 600 H 310 mm., Item: Ink Jet, In stock: Yes, Amount in stock: 1 pc., Motor: 220 Volt, Manufacturer: Matthews Marking Products, Type: Mark EZ Touch, Model: C84
1.600 litre, Stock number: T3950, Litre: 1.600 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs with truck grip, Top: Dished, Bottom: Dished, Double jacket: No, Insulated: No, Tank cover: In the top Ø 400 mm., Agitator: Prepared for agitator in the bottom, Agitator type: Magnet, Inner diameter: Ø 1350 mm., Total height: 1800 mm., Manufacturer: KOFA, Year: 2001
1.600 litre, Stock number: T3951, Litre: 1.600 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs with truck grip, Top: Dished, Bottom: Dished, Double jacket: No, Insulated: No, Tank cover: In the top Ø 400 mm., Agitator: Prepared for agitator in the bottom, Agitator type: Magnet, Working temperature: 0-20° C, Working pressure tank: -1/0 bar, Inner diameter: Ø 1350 mm., Total height: 1800 mm., Manufacturer: Vamdrup Rustfrit Stål, Model/type: 2343, Year: 1991
348 litre, Stock number: T3939, Litre: 348 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs with truck grip, Top: Dished, Bottom: Dished, Double jacket: No, Insulated: No, Tank cover: In the top Ø 255 mm., Agitator: Yes, Agitator type: Magnet, Working temperature: -15/100° C, Working pressure tank: 0,5/-1 bar, Inner diameter: Ø 630 mm., Total height: 1250 mm., CIP: Yes, Other: Prepared for agitator from the top., Manufacturer: G.A. Rustfri, Year: 2009
270 litre, Stock number: T3936, Litre: 270 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 6 pcs., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: No, Insulated: No, Tank cover: In the top Ø 255 mm., Agitator: No, CIP: Yes, Working temperature: 0/100° C, Working pressure tank: 0/0,5 bar, Inner diameter: Ø 540 mm., Total height: 1550 mm., Manufacturer: M.D. Rustfri, Year: 2014
maximum number of results exceeded
please refine your search
