con pro used for sale

PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -double shaft output -Design: B3 -Protection rating: IP33 -Dimensions: 370/250/H190 mm -Weight: 16 kg

hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot defective, see photo -Power: 7.5 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 510/370/H340 mm -Weight: 110 kg

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 22 mm x 60 mm -Design: B5 -Protection class: - -Flange diameter: 254 mm -Recess diameter: 180 mm -Dimensions: 380/305/H250 mm -Weight: 32 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 28 mm -Design: B3 -Protection rating: - Quantity: 1 piece available -Dimensions: 420/320/H290 mm -Weight: 54 kg

Three-phase motor, electric motor -Power: 5.2 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 450/340/H270 mm -Weight: 65 kg

Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Manufacturer: Lincoln -Type: Control 84513 -Number: 1x relay available -Price: per piece -Dimensions: -Weight: 0.9 kg

InterBus-S, bus coupler -Manufacturer: Phoenix Contact, Interbus -Type: IB STME 24 DO 32/2 Ord.No. 2754370 -Number: 11x available -Price per piece -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.

InterBus-S, bus coupler, Interbus -Manufacturer: Phoenix Contact, Interbus -Type: IB STME 24 BDO 16/3 Ord.No. 2751700 -Price per piece -Number: 16x available -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.

InterBus-S, bus coupler, Interbus Manufacturer: Phoenix Contact -Type: IB STME 24 BDI 16/4 -Number: 75x available Price: per piece -Dimensions: 120/115/H115 mm -Weight: 0.7 kg/pc.

InterBus-S, bus coupler, bus terminal, bus terminal -Manufacturer: Phoenix Contact, Interbus-S Bus Terminal -Type: IBS ST 24 BKM-T Ord.No. 27 50 154 -Price: per piece -Number: 17 modules available -Dimensions: 115/45/H115 mm -Weight: 0.2 kg/pc.

Air bellows, roller bellows, air cushions -Number: 2 pieces -Manufacturer: Contitech -Type: 644 N -Package price -Weight: 2 kg

Pneumatic pressure switches Type: MDR2/11 -Number: 7x pneumatic pressure switches available Price: per piece -Weight: 0.3 kg

centrifugal pump, water pump, stainless steel pump, food pump -Manufacturer: Hilge, stainless steel centrifugal pump -Type: Contra I/3 AD-V 25/25/1.5/2 -Motor: Siemens 1.50 kW / 2860 rpm -Inlet/outlet pipe connection DN25 -Dimensions: 715/215/H265 mm -Weight: 37 kg

InterBus-S, bus coupler, Interbus -Manufacturer: Phoenix Contact, bus coupler -Type: IIBS ST 24 BK LB-T Ord.No. 2753232 -Price: per piece -Number: 3 modules available -Dimensions: 120/80/H110 mm -Weight: 0.5 kg/pc.

Connector, plug, sensor module -Manufacturer: Phoenix Contact, Y-distributor 5 pieces ovp -Type: SAC-3P-M12Y/2XM12FS PE -Screw lock: M12 -Price/delivery: complete -Dimensions cardboard: 115/80/H30 mm -Weight: 0.1 kg

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

for soft doughs

Two-column Stela continuous dryer, ALU exhaust fan with dust separator, circulating air fan, indirect air heater with stainless steel chimney, white main burner, corn capacity 30 t/h, 35 to 15% H2O, Tel. 01715213204

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust SC 15 from GSL aerial work platform -Tire size: 5.00-8/3.00 -Bolt circle: Ø 110 x 15 mm -Inner diameter: 67 mm -Quantity: 1 piece -Dimensions: Ø 460 x 125 mm -Weight: 20 kg

ABG OMEGA 510 Converter  Manufacturer: ABG  Machine type: Omega 510 Converter  Type: Blanco labelling machine  Year of construction: 2010  Working width: 520 mm  Number of punching stations: 2  Equipment:  Unwinding - 76 mm  Splicing table  Side edge control  Grid take-off and matrix rewinder/grid rewinder  Label converter/label shifter for 110x75 mm format (not ABG)  Slitting station with 4 shear blades  2 separate rewinding axes  Tools: o Magnetic cylinder 134 Z or 16.75" o Magnetic cylinder 161 Z or 20.125"

Tea Bag Machine Teepack Constanta You are welcome to visit.

pressure sensor, pressure transmitter, pressure transmitter, pressure switch, -Manufacturer: Huba control, pressure transmitter type 691.9300071D orig -Input: 0... 10 bar -Pressure: max. 20 bar -Number: 3x transmitter available -Price per piece -Cardboard dimensions: 140/70/H45 mm -Weight: 0.3 kg/pc.

Automatic hardcover counter strainer equipped with: • Automatic Cover Feeding • Automatic carton feeder from 1 to 5 pieces • With servo motors and 3 photoelectric sensors for the registration of the sheet on the side and diagonal cardboard • Automatic viscometer • Touch screen for convenient and quick adjustment of the machine It allows cardboard lining with window and cardboard lining with some irregular shapes (such as some non-straight side). Maximum format size of 900 x 460 mm

Brand: M. Conti Type: Toolmeter Model: P382N Tablemodel Serial Number: Y13/835 Construction year: 2013 Weight: 0,04 tons Length mm: 700 Width mm: 300 Height mm: 700 Condition machine : Power supply broke

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch -Manufacturer: Phoenix Contact, FL Switch Industrial Ethernet Switch -Type: SFN 5TX -Order No.: 2891152 -Voltage: 24VDC -Dimensions: 130/75/H30 mm -Weight: 0.3 kg

Grundfos Water Pump CRN10-02 with Control Pump from 2022, as good as new, complete with control system, 1 available. 0.75 KW, 10 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN10-02 A-FGJ-G-E-HQQE Serial number: 0001 Type: Water Pump with Control Power [kW]: 0.75 Flow rate [m3/h]: 10 Pressure max [bar]: 25 Pumping height [m] 15 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

PLC expansion module, switchgear, control system, marshalling module, circuit board module -Manufacturer: Phoenix Contact, PHG patch panel -Type: UMK-SE 11.25-1 ID number: 3522449 -Number: 2 modules available -Price: per piece -Dimensions: 115/75/H40 mm -Weight: 0.1 kg/pc.

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Control Techniques, Brushless AC Servo Drive -Type: MAXAX 100/6000 -Input: 1.5 kVA -Output: 1 kW -Dimension: 315/230/H60 mm -Weight: 2.9 kg

for sale: elements of Tetra Pak conveyors: We will send a list of items and photos at the customer's request.

Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece

Used Rheinhardt Technik Conti Flow Vario 2K for bonding and sealing dosing system !

2500 KVA Transformer Year 2009

tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10 2 pieces -Tire size: 23 x 5 SC 10 RIM 3.75 P -Bolt circle: Ø 160 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 41 kg/piece

Telecentric lighting, LED lighting -Manufacturer: Vision Control, Telecentric Lighting -Type: TZB60-B -Light field diameter: 60 mm -Dimensions: 140/70/H115 mm -Weight: 0.8 kg

Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm

The CONTIMOL is the continuous sugar dissolver to produce sugar syrup (simple syrup) with constant quality and concentration. The unit can be customized to individual needs regarding potential product output and based on usage and availability of energy. Module Features • High degree of automation • Jet-Mix-System • Short start-up phase • Existing CIP integration • Manufactured using high quality material The unit includes: -Mixing station on the frame; -Control cabinet; -Power cabinet; -Vertical bunker for sugar 5.000l. with scales; -A set of augers for feeding sugar into the dissolving unit;

Control CNC 432 Ref. 4022 226 4280 D 004594

Hose reel, hose unwinder, tank hose reel, wall reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel -Manufacturer: Consul, grease hose reel -Type: M 095 -Hose length: 8 m -Dimensions: 780/270/H550 mm -Weight: 29.2 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels -Manufacturer: Continental, tires ContiRV20 Velocity with rim -Tire size: 7.00 R 12 -Bolt circle: Ø 170 x 18 mm -Recess: Ø 138 mm -Dimensions: Ø 660 x 185 mm -Weight: 41 kg

Power supply, power converter, power supply unit, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 Ord.No.: 2903151 -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

V23 - used approx. 28.5 m³ / 28,500 ltr stainless steel tank V4A container tank, insulated, heatable and coolable. technical details: capacity: approx. 28.5 m³ / 28,500 litres material: stainless steel V4A dimensions: approx. Ø 2.50 m × L 9.20 m × H 2.60 m without railing Used V4A stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank, container tank, insulated by approx. 20 cm glass wool / rigid foam, heatable or coolable. With foldable railing, 2x lid on top of the roof, several inlets and outlets. The tank is being sold as shown in the pictures. Can be used as storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update al ...