con pro used for sale

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.

General SKU431X1350 LocationBarneveld CEcheck MakeGeppert Band Conveying Systems Main Features Motor0.25 KW Length3800 mm Width140 mm Specified Features - Conveyor belt MaterialPlastic, Stainless steel Conveyor beltcheck Elevator beltcheck Belt width140 mm Belt length3800 mm With carrierscheck Carrier height100 mm With motor0,25 kW, 219-241/380-420 volt, (Ex) Belt speed137 rpm Outlet height1300 mm Information TypeGES-50-K-W Mach.No.1509113 Year of construction2015 Mounted on framecheck Inclined on framecheck Floorspace3,20 x 0,80 m Total height2,20 mConveyor beltsGeppert-Band GmbHConveying systems > Conveyor beltsBrand > Geppert-Band GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU399X1181 LocationBarneveld CEcheck MakeAermec Main Features Heating (medium)Ammonia Capacity19.7 KW Temp.7 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck With coolingcheck Capacity19,7 kW Temperature7 °C With pumpcheck With temperature controllercheck With controlcheck Information TypeWRL081 EA P Mach.No.646695 Year of construction2017 With switchcheck With switchgearcheck Floorspace0,78 x 1,15 m Total height1,1 m Weight450 kg Extra SpecificationsRefrigerant: R410A Refrigerant charge: 0,50 kg Pump type: On-off Pump side: System side Compressor type: Scroll Temperature control unitsAermecHeat exchangers > Temperature control unitsBrand > Aermec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU327X677 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity4.5 KW Temp.45 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity4,5 kW With coolingcheck Temperature-25°C/+45°C Tank capacity80 l With pumpcheck 3x Capacity1,4 m3/h Motor3 x 1,1 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR400T Mach.No.HKS08079 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,30x1,90 m Total height2,00 m Weight2000 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...

General SKU394U1128 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity300 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Heating medium:Therminol D12 Heating capacity300 kW Electric capacity306,45 kW, 400Volt Temperature-40°C/+200°C With pumpcheck Capacityunknown. Motor5,5kw, 400/690 volt, 2880rpm (ex) Information TypeTR400 HHKT-EX Mach.No.HKS08019 Year of construction2008 Floorspace2,15x1,00 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU278N326 LocationBarneveld MakeLAUDA TypeSUK 400 W-EX Main Features Heating (medium)Electric Capacity27 KW Temp.20 °C Specified Features - Temperature control unit Temperating machineProcesscoolingsystem Heating medium:Downtherm J With coolingCoolingmedium R404 A Temperature-40 /20 gr.C. With pumpcheck Motor37 KW, 400 Volt (Ex) With temperature controllercheck Information Mach.No.HKS08013 Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace1,3x1,9 M Total height2 M Weight2300 KG ATEX compatiblecheck Technical specs Extra informationheatingsystem 8 bar, coolingsystem 28 barTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...

General SKU327X678 LocationBarneveld CEcheck MakeLauda Pressure Working pressure28 Bar Main Features Heating (medium)Water glycol Capacity15.5 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating capacity15.5 kW With coolingcheck R404a Temperature—30 / 120 °C With pumpcheck Capacity67 l./min With temperature controllercheck Information TypeT 10000 W Mach.No.LWP210-08-0005 Year of construction2007 Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace0,85 x 0,80 m Total height0,97 m Weight242 kg Extra SpecificationsWorking temperature range: —30 / 120 °CTemperature control unitsNew arrivalsLaudaHeat exchangers > Temperature control unitsNew arrivalsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready fo ...

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Interface converter, converter module, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Phoenix Contact, Interface converter, original packaging -Type: PSM-EG-RS232/TTY-P/2K Ord.-No. 27 61 253 -Quantity: 1x Converter available -Cardboard dimensions: 120/90/H70 mm -Weight: 0.3 kg

CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, converter, inverter -Manufacturer: Control Techniques, Commander SE frequency converter -Type: SE2D200150 SE 2.5M/TL -Power: 1,5 kW -Input: 200/240V - 50/60Hz -Output: 3 Ph 0-240V 0-1000Hz -Dimension: 145/130/H280 mm -Weight: 3.3 kg

General SKU900WP093 MakeHaake TypeUWK 90, Type 003-3978 Mach.No.003-3978 LocationBarneveld Extra Specifications231 V, 50 Hz, IP20, CE certifiedTemperature control unitsThermo HaakeHeat exchangers > Temperature control unitsBrand > Thermo Haake What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU413X1254 MakeVirba LocationBarneveld TypeVSK 14,7-10-10/7,5-II Main Features MaterialStainless steel Motor0.9 KW Surface2.06 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface2,06 m² Bed sizes2750 x 750 mm Product inletø 150 mm Product outlet2x ø 200 mm Number of sections:1 Air inletø 250 mm Air outletø 400 mm Vibro motorcheck 2x Motor2x 0,90 kW, 400 V, 965 rpm MaterialStainless steel 1.4301 (304) Information No.33482 Year of construction1997 Mounted on mild steel framecheck Floorspace3,70x1,40 m Total height2,25 mFluid bed dryers continuousNew arrivalsVibraDryers > Fluid bed dryers continuousNew arrivalsBrand > Vibra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH LocationBarneveld CEcheck TypeWS-R-V-T-2.80-0.50-0.30 Main Features MaterialStainless steel Motor11 KW Surface2.8 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Continuous operation, pressure/suction mode Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)check (Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) Information No.380 Year of construction2013 Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m Extra Specifications Not suitable  ...

General SKU014G031 MakeMachinefabriek Vrieco Zelhem B.V. TypeS 70 RB-S Mach.No.52624 Year of construction1978 Pressure Working pressure0.2 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume7000 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity8700 Ltr (7000 ltr nett) Largest cone diameter2950 mm Cone height4300 mm Dished topcheck Manhole500 mm With stainless steel armcheck Top drivecheck Motor13,0/20,0 kW (380 V) Motor1,1/1,8 kW (380 V) Bottom bearing pintle bearingcheck With jacketcheck Max. temperature120 degC Outlet with sliding valvecheck MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace3,0 x 3,0 m Total height4,3 m Extra Specifications-- RECONDITIONED -- Conical mixersCatalysts & fillersFeed additivesPaper & otherDiscountOther pharmaceuticsSugarAnimal feedOther fee ...

General SKU374U1018 MakeHosokawa Micron Europe B.V. LocationBarneveld Type100 RV-4 Main Features MaterialStainless steel Volume10000 Ltr. Motor11 KW Specified Features - Conical mixer Conical mixercheck Capacity10.000 Ltr Largest cone diameter3300mm Cone height4935mm Manhole2x With stainless steel armcheck Top drivecheck Motor11 kW, 380 volt + 1,1 kW, 220/380 volt Bottom bearing pintle bearingRadial screw bearing Bottom discharge4x Dia. 125mm MaterialStainless steel 1.4301 (304) Information No.101365/2310049 Year of construction1992 Floor space3,6x3,6 m Total height6,5 mConical mixersDiscountHosokawa MicronMixers > Conical mixersDiscountBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

General SKU201P110 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity11000 Ltr (5000 Ltr nett capacity) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armwith mechanical seals Top drivecheck Motorscrew, 15,0 kW, 380 Volt (Ex) Motorarm, 1,35 Kw, 220/380 Volt (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100°C. Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Mach.No.WK 109923A / WK 340369 Year of construction1988 Floorspace3,1x3,0 M Total height5,5 M Weight+/- 7000 KGConical dryersCataly ...

General SKU254S474 LocationBarneveld Main Features MaterialStainless steel Motor2.3 KW Surface0.075 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface± 80 cm2 Bed sizes3 x 25 cm Product inletcheck Product outletcheck Air inletcheck Air outletcheck Without motorcheck Filter surface75 cm2 Heating unit (electric)check MaterialStainless steel 1.4552 Information MakeExperimental fluid bed dryer Mounted on stainl. steel framecheckFluid bed dryers continuousDyes & pigmentsBrillDryers > Fluid bed dryers continuousIndustries > Chemical > Dyes & pigmentsBrand > Brill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ma ...

General SKU201P111 MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.M1180 Year of construction1988 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer MaterialStainless steel 1.4404 (316L) Conical dryercheck Capacity5000 Ltr. (max. 11000 Ltr.) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armcheck (with mechanical seals) Top drivecheck Motorarm: 1,5 kW (Ex): screw: 16 kW (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100 °C Outlet with sliding valvecheck Information LocationBarneveld Floorspace3,1x3,0 m Total height5,5 m Weight± 7000 kgConical dryersCatalysts & fillersFeed additivesPaper & otherOther pha ...

General SKU202P126 LocationBarneveld MakeHosokawa Nauta BV Haarlem TypeMBXU-20 RVW Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket0.4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity2000 Ltr Largest cone diameter1980mm Cone height3000mm Dished topcheck ManholeDN500 Stainless steel armcheck Motorarm 0,75 KW, 380 Volt Motorschroef 15,0 KW, 380 Volt Bottom bearing cross couplingcheck With jacket(8 m2) Max. temperature100 degr.C. Bottom outlet(1x) dia.150mm (1x) dia.75mm MaterialStainless steel 1.4301 (304) Information Mach.No.M18666 Year of construction1973 Floorspace2,1x2,0 M Total height4,85 M Weight3000 KGConical dryersCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsSugarAnimal feedOther feedSolid pharmaceuticsAPIMinerals & inor ...

Used Carton Weight Scale Logics & Controls year 2000 The LOGICS & CONTROLS carton weight scale system, featuring the LOGIWEIGHT model, stands as a reliable and cost-effective option for industrial bottling needs. Launched in January 2000 it offers enduring performance and precision in carton weight measurement. Precision and Reliability We meticulously designed the LOGIWEIGHT system with a precise focus on accuracy and reliability. Thanks to its advanced technology, it ensures accurate carton weight measurement, which is vital for optimizing packaging and shipping processes. Moreover, it provides consistent measurements and dependable results. Advanced Technology With the LOGICS & CONTROLS brand, one can expect cutting-edge technology. The LOGIWEIGHT system seamlessly integrates innovative features for efficient carton weight management, allowing complete control and meticulous data reco ...

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

Stainless steel container with manhole 500 litres capacity Derivative: NW 50 Dimensions in cm: 120 height x 93 length x 74 width

1 office container system approx. 1,000 m2 Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal inju ...

Offer: Sgmmns container wagon for 20' and 40' containers We would sell these from location Europe: Unit price is from Station Europa see specification in the appendix: Offer price for these cars: on request €/piece plus VAT These cars can be taken on the hook immediately after inspection and payment. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Error reserved; All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept a ...

Other data and price on inquiry. Do you need another machine or the whole arrangement? We have more than 1000 other used machines on stock. Please send us an email with your need.

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Rubber buffers / silent blocs for concrete block machines Brands: SCHLOSSER, Hess, Masa, Omag, Rekers, Frima, Techmatic Web: contec-ek

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

AIR TEMP.: 600 °C, 2 CHAMBERS, SLAB DIM.: 1.54 x 3.0 x 0.35 M - W x L x T

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

R25897/18 SCHIAVI laminating machine model: ECO Convert Junior age: 1997 size: 1.350 mm available: short dated Duplex- wet- laminating with solvent-free glue sleeve diameter: 76 mm 1. unwinding max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 35 kg 2. unwinding max. reel dimater: 1.000 mm core diameter: 75- 150 mm max. reel weight: 1.600 kg web tension: 2- 20 kg rewinding: max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 40 kg Available: kurzfristig

24 V/ 40 A battery charger from Convertitori Statici

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

Universal mill for the grinding. Drive: 75 KW / 2966 UPM; 5 identical machines on stock!

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.

Complete Shavereinheit with handpiece, foot switch, 2 sterilization box for the Shaverpaltes. 46 Shaverplates Fully functional. Unused, mint condition, used only for demonstration purposes.

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm