con pro used for sale

voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5

(slitter / cutter / creaser) M. No.: 081058130 Power: A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Max. Programmable 10 creases, programmable in steps of 0.1 mm

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Specifications: Manufacturer: BITO Pro Version: right 24311 The scope of delivery includes: 01x Holder for push-through protection, used Material color: sendzimir galvanized Total width: approx. 93 mm Total depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (HxW) Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/ pcs.: 0,192 kg

Specifications: Manufacturer: BITO Pro Version: left 24310 The scope of delivery includes: 01x Holder for push-through protection, used Material color: sendzimir galvanized Total width: approx. 93 mm Total depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (HxW) Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/ pcs.: 0,189 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Roco PRO BMF-40

PROMA FVV-135PD universal milling machine was built in 2018 in the Czech Republic. The highly reliable machine with a rigid construction is designed for precise machining of workpieces both vertically and horizontally, thanks to the vertical and horizontal spindle with an ISO 40 taper. The milling process is performed in the X,Y,Z axes on a fully illuminated working area with dimensions (L x W) of 1320 x 320 mm. The milling machine is additionally equipped with, among others, a SINO digital readout and cooling. The total weight of the machine is 2100 kg. Technical data of the PROMA FVV-135PD milling machine - work table size (L x W): 1320 x 320 mm - axis work feed: X,Y,Z - feed of table in X/Y axis: 1000/300 mm - rotation angle of rotary head: 360° - maximum vertical milling diameter: 25 mm - maximum horizontal milling diameter: 125 mm - maximum milling head diameter: 125 mm  ...

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Complete palletizer, make Procomac, for 12x 1.0 PET cycle modular crates and Schrinkpacks, built 2000, with Fanuc robot, 1 palletizing head for modular crates, 1 palletizing head for Schrinkpacks, pallet magazine, pallet transport, required installation space approx. 150 m².

Weibert W7-32 Profi 5-fold station wagon Planer width: 320mm Cutting length 2100mm Milling stop for tool max. D=220mm 3 motors 3kW Price 6975,-€ excl. VAT Price 8300,-€ with VAT.

Weibert WJ-FS-41 Profi Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height 4 reversible planing knives WJ-300200

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

Capacity: 90kg of green coffee per roast ( up to 360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt-idirect The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating and temperature resistant paint) Inspection of the roaster is possible at any time.

Capacity: 75kg of green coffee per roast ( up to 300kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Probat-direct The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with R3852389 automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating and temperature resistant paint) Inspection of the roaster is possible at any time.

Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators -Fieldbus coupler type: 750-333 -Bus terminals: 19 (14x750-403/4x 750-504/1x750-600) -Dimensions: 280/100/H65 mm -Weight: 1 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg/piece

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 50 to 100 mm -Load capacity: 6000 kg -Quantity: 1 piece available -Price: per piece -Weight: 29 kg/piece

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm -Length: 2505 mm -Weight: 24 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg

150-180kg/batch general overhauled (exact listing on request) For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probat

Control unit, control panel, operating panel, control unit, foot switch, safety foot switch -Foot switch: Safety foot switch from Promecam STPC 250 40 121 press brake -Metal housing: with protective cover -Overall dimensions: 380/180/H165 mm -Weight: 6.7 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 2 parts -Upper tool: dimensions 835 x 60 x 130 mm each -Dimensions: see the drawing in the photos -Total weight: 47.5 kg

Bending tool, die, upper knife, upper tool -Tool: for press brake, 9 pieces -Dimensions: 95 x 31 mm -Total length: 5005mm -Dimensions: see the drawing in the photos -Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each -Transport dimension: 835/210/100 mm -Weight: 86 kg

Bending tool, die, upper knife, upper tool -Tool: for press brake, 11 pieces -Tool: 60° -Dimensions: 95 x 36 mm -Dimensions: see the drawing in the photos -Total length: 7780mm -Lengths: 8x 835 / 2x 600 / 1x 500 mm -Transport dimension: 835/400/324 mm -Weight: 182 kg

M. No.: LNDE002222 Ink Technology: Ultrachrome® Colours: Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum Droplet Size: 3,5 pl Nozzle Configuration: 360 Nozzles Black, 360 Nozzles per Color Printing Resolution: 2.880 x 2.880 DPI Paper Formats: A0, A1, A2 (42.0x59.4cm), A3+, A3 (29.7x42.0 cm), A4 (21.0x29.7 cm), B1 (72.8x102.8 cm), B2 (51.4x72.8 cm), B3, B4, 17", 24", 44" Print Margins Sheet Media: Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Compatible Paper Thickness: 0,08 mm - 1,5 mm Duplex: No Equipment / additional information: with roll holder

Pressure vessel, pressure tank, pressure vessel, -Manufacturer: UM Alloy Products, stainless steel compressed air tank -Type: 316L MAWP 9 BAR -Contents: approx. 5 liters -Permissible operating overpressure: 9 bar -Dimensions: Ø 240 x 300 mm -Weight: 5.3 kg

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

MAZZONI LB toilet block production line. New 2007. The line consists of : 1. mixer PS-256.1 2. screw conveyor T-255.1 3. extruder PL-258.1 4. cutting device (twin-bladed slicer) PX 258.1 5. cutting machine (tracked single-feed slicer) PX 256.1 6. additional production line equipped with bag dust collector FW-PARTNER-2200/N 7. additional belt conveyor for transport of difficult raw material . 8. single-coil forming head. 9. double-coil forming head. 10. COREMA thermoregulator.

Cutter Roland CAMM-1 Pro Art.Nr. PS5947 FB 500 euro + 19%

Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan

Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan

PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE

Saw blade, wood saw blade, circular saw blade -Manufacturer: Guhdo, saw blade HM NE PRO -Type: 350x3.5/3.0 Z108 -Article No.: 2185.351.31 -Speed: n max. 5400 rpm -Use: non-ferrous profiles/plastics -Dimensions box: 385/385/H10 mm -Weight: 2.4 kg

CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts  ...

Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen -Manufacturer: Pro-face, industrial monitor flat screen touchscreen -Type: FP3710-T42-U -Article No.: PFXFP3710T2AU -Model: 3580406-01 -Dimensions: 475/120/390mm -Weight: 10.4 kg

Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!

Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!

Color Digital Press with High Capacity Tray and Finisher Unit, Fiery Rip, Format: 30x42, Standard Accessories

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft material, shaft, steel shaft, hardened shaft, profile shaft, splined shaft, toothed shaft -Spline shaft: Splined shaft profile shaft 8 teeth -Diameter: 54 mm -Length: 2440 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: Ø 54 x 2440 mm -Weight: 37 kg

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Bayerwald, metal band saw M42 unused -Type: M42 2480x27x0.9 8/12 -Quantity: 1x metal saw band available -Transport dimensions: Ø 280 / 55 mm -Weight: 0.5 kg/piece

V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm -Hole: Ø 32 mm -Weight: 29.5 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg