129,238 used machines on RESALE, but how to find them? Machine Search
Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without com ...
A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible.
Output: 1000/min, number of cameras: 2. On-site inspection is possible.
Offer 22252 Specifications: - Cutting range at 90° round + square 330 mm - flat 600 x 320 mm - Mitre adjustable left / right 30 / 45 ° - Schnittb. at 45° Re + Li around 320 mm - flat 350 x 320 mm - Material support height approx. 920 mm - Saw blade dimensions 4440 x 34 x 1.1 mm - Cutting speed infinitely variable 10 to 100 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise - Coolant device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 1400 x H 1400 x D 2400 mm - Weight approx. 1000 kg
Used stainless steel cube mixer, made by Paasch, type: F 31. Total capacity 3500 liters.
max. workpiece length: 4500 mm profile spindle: 1 Stück main drive: 20 kW Control: Siemens Weinig Conturex 2 C 114 --------------------------------------- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm -------------------------------------- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: --------------------------------------- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: --------------------------------------- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head --------------------------------------- For horizontal and vertical drilling and milling work without tool changes --------------------------- ...
Krones Air Conveyor diverter from 1 to 2 for PET air transport
Marel concept 500 labelling machine, - top and bottom labelling machine
A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible.
Size: 1400 mm Equipments: Register punch Good condition
TWIN SCREW EXTRUSION LINE, Top Italian Constructor, for PVC both soft and rigid, max infeed 10-12 mm size, forced feeding hopper, dosing unit, 2 parallel, counter-rotating screws 118 mm diam. 25 L/D, pressure control;, nitrided steel barrel with degassing vent 2,2 kW, Barrel heating bands kW 76,00, Extruder cooling barrel motors power 4x 0,37 kw, n.7 Heating zones, Extruder a.c. motor 120 KW, Extruder tot power 205 kw, Extruder average absorbed power 105,00 kW, Extruder rpm 8-45, Lubrication pump 1,50 kW, Electric cabinet with inverter and modem for remote diagnosis, semi automatic screenchanger for PVC, granulating head, die face dry pelletizer, cooling unit, Installation and start up included (boarding and travel costs on Buyers charge), Total installed power: 205 kw - 105 kw average in use
Perconta Contomat High Performance Self-Service Coin Settlement Terminal Tomatoes are taking over more and more routine tasks from bank employees. The trend that has set standards with automatic cash dispensing and the printing of account statements continues in coin processing with the Contomat. If you are looking for a solution for the customer-oriented deposit of hard change, you are well served with the Contomat self-service terminal. You can find more coin settlement terminals in other sizes - new and used - in our shop! International shipping costs on request!
The Apollo Spiral Conveyor Elevator is a specialized piece of equipment used in material handling and packaging processes. Here are some of its key features and functions:, - Space-Saving Design: The spiral design allows for vertical movement of products within a compact footprint, making it ideal for facilities with limited space., - Continuous Flow: It provides a smooth and continuous flow of products, ensuring efficient transportation between different elevation levels (e.g., moving items from a lower level to a higher one)., - Versatile Applications: This conveyor can handle various types of products, including packed bags, boxes, and other materials, making it suitable for a variety of industries such as food, beverage, and logistics., - Gentle Handling: The conveyor design minimizes product damage during transport, which is crucial for fragile items or those that require careful ha ...
Height=1.85 m, Overall length= 1.31 m, Overall width= 4.56 m, Net weight= 1295 kg,
x-travel: 1520 mm y-travel: 700 mm z-travel: 800 mm control: Siemens 828 D Shop Mill table surface area: 1600 x 700 mm rapid traverse: 30 m/min table load: 1,4 t turning speed range: 8000 U/min max. torque on the spindle: 300 Nm power capacity - milling spindle: 19,5 kW no. of tools in the magazine: 30 Stück tool taper: SK 40 | | weight of the machine ca.: 10,0 t dimensions: 4,4 x 2,3 x 2,9 m Equipment: - Coolant through the spindel - Rigid tapping - Dialog programming Shop Mill - Chip conveyor - external elect. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A packing station Marel including three scales is available. The machine is suitable, for example, for flow pack packaging (Geba SC 125 MAV etc.). It is well packed and ready for collection. Documentation available. An on-site inspection is possible.
Made in sturdy painted carbon steel, Size and angle depending on availability of the moment
x-travel: 200 mm y-travel: 60 mm z-travel: 500 mm speed of measurment: 0,02 - 20 mm/s 0: X = 0,05 µm 0: Z = 1 µm mg traversing speed: X = 0 - 80 mm/s base plate: 600 x 450 mm weight of the machine ca.: 164 kg dimensions of the machine ca.: 766 x 482 x 1166 mm CE signed: Contracer contour measuring device, high-performance measuring system for automatic series measurement with motorized Z-column on granite plate. Straightness guidance of the X-axis via ceramic and automatic raising and lowering of the probe tip. Measuring range Z1 - axis = 60 mm. Table, screen and PC. The software can measure, evaluate and document. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.
Manufacturer: Walter Metz Type of Machine : Container Washing System Condition : New Compatible with pallets and large four-wheel containers (660L & 1100L) Find more here - / Contact us at -
Deck Oven Miwe Condo C-3-1208 Miwe Condo Model: Type: CO.3.1208 Bottom heat and top heat can be controlled individually Chassis mobile with brake Connection 400V, 3 x 16A-CEE plugs Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven
Power : 68kW at TC -25°C (ΔT 6 K) Temperature range : -40°C to 55°C Flow rate : 90000 m³/h Slats : 495 m² Volume : 117 litres Weight : 923 kg with 6 fans 630mm, with 2 refrigeration circuits at 50% each with defrost heater see nameplate Only been in operation for 1 year, condition as good as new 2 pieces in stock Price on request
Key data: 165 mm, 330 mm, 2800 U/min
WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!
ROBOTS FOR HIGH PRESURE DEMOLITION PUMPS IN GREAT CONDITION. ROBOT CONJET 363, 322 , AND JETFRAME SYSTEMS 102
Blowing machine Krones Contiform 308 year of manufacturing: 2015 capacity: 18.000 bph neck size: PCO 28 - 1881 only 20.000 working hours with preform feeding system and chiller immediately available in Germany
turning length: 800 mm turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning speed range: 24 - 2800 U/min spindle bore: 38.0 mm centre height: 165 mm total power requirement: 3.5 kW weight of the machine ca.: 850 kg. dimensions of the machine ca.: 1850 x 800 x 1700 mm from a vocational school - in good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions The data for this ad ...
Model: Conslit 17 Year of construction 2002 Web width: from 500 to 1750mm 2x web side guides / 2 side edge controls Friction and air shafts: 70, 76, 152 mm
length: . mm width: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m 5 pieces available, price per piece The technical data are manufacturer or operator specifications and aretherefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: ESSEMTEC Model: Convection Reflow Oven Year of Manufacture: 2016 Type of Machine: Reflow oven soldering station Condition: Good Exterior Dimensions: - Width: 24.016 in (61.0 cm) - Depth: 35.827 in (91.0 cm) - Height: 16.929 in (43.0 cm) Weight: 331 lb (150 kg) Find more here - / Contact us at -
Schwarzmüller AZ S08 container carriage, Drawbar trailer, Technical specifications:, - Dead weight: 2,600 kg, - Wheelbase: 2,150 mm, - Gross vehicle weight: 18,000 kg, - Hz. Axle loads [2]: 9,000 kg, - Payload: 15,400 kg, Characteristics:, - 4 container closures, - Trough container recording & encryption, - High air suspension => suitable for all BDF heights, - incl. disc brakes
For Sale: Mahler Continuous Furnace with Güntner Cooler Mahler Continuous Furnace - Manufacturer: MAHLER - Type: DLE 800/220/3000 G - Heat Power: 172 kW - Nominal Temperature: 1120 °C - Year of Construction: 2014 - Certification: CE Güntner Cooler - Manufacturer: Güntner - Model: GFDC WD 080.1/14-42-3980105M - Year of Manufacture: 2021 - Volume: 133.6 liters - Max. Permissible Pressure: 10 / 0 bar - Permissible Temperature Range: -50 °C to +100 °C - Ambient Temperature Range: -30 °C to +50 °C - Fan: VT03061U.1 / 2448 / 630 min⁻¹ / 2.1 A - Test Pressure: 11 bar (Compressed air) - Test Date: 2021-03-15 - Fluid Group / State: 2 / Liquid Find more here - / Contact us at -
Height=19 m, Overall length= 90 m, Overall width= 125 m, Net weight= 50 kg, Miwe SK-II Econo Modular steam condenser Power: 0,2 kW; Mesuares: 90x125x19 cm; Avaliable: 2 tk.
Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm
Manufacturer: Miwe Miwe Condo deck oven with 2 double chambers, 4 floors, proofing cabinet plus vapor condenser 4 floors Tray dimension: 60x80cm Digital control Dimensions:210x90x120cm Power: 400 / 230V / 50Hz Voltage: 20.9kW
Manufacturer: Miwe Miwe Condo deck oven with 2 double chambers, 4 floors, proofing cabinet plus vapor condenser 4 floors Tray dimension: 60x80cm Digital control Dimensions:210x90x120cm Power: 400 / 230V / 50Hz Voltage: 9.8
Offer 25359 Specifications: Cutting range at 90° around 250 mm - flat 275 x 180 mm - Mitre adjustable left Schnittb. at 45° around 200 mm - Schnittb. flat at 45° 190 x 180 mm - Schnittb. flat at 30° 130 x 110 mm - Material support height approx. 920 mm Saw blade dimensions 3100 x 27 x 0.9 mm Cutting speed infinitely variable 15 to 100 m/min hydr. Lifting – lowering the saw frame Upper stroke limit of the saw frame Cutting pressure infinitely adjustable 0 - 10 m/min hydr. Material vise Micro Spray Coolant Device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 2400 x H 1600 x D 1800 mm - Weight approx. 1300 kg - 3 x roller conveyor 1500 mm
turning diameter: 340 mm turning length: 600 mm turning diameter over slide: 300 mm control: Siemens 840 D spindle passage: 55 mm spindle nose: ASA 6 number of spindle speeds: 4000 U/min spindle motor: 27 kW Number of tools: 12 VDI 40 driven stations: 12 VDI 40 speed of driven tools: U/min power of driven tools: kw rapid traverse: 30 m/min Spindlespeed subspindle: U/min power sub spindle: 15 kw range L-W-H: m weight of the machine ca.: t CNC- lathe with driven tools an subspindle Driven toolstation cannot be used due to cable breakage - chip conveyor - sub spindle - driven tool stations (not working) - tool measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 MURATA rest cone winder type 7R-2, automatic cone winder for residual yarns, 5 spindles, year 1990, magazine feed with 12 cans, diameter of supply yarn 75 to 110 mm, individual knotters, exit cones traverse 6"=150 mm, conicity 4º20', winder can make cones up to a weight of 4 Kg, winding speed 1000 m/min
1 EFI REGGIANI MEZZERA continuous bleaching and scouring instalation, year 2020, commissioned 2021 (only 4800 working hours), roller width 2000 mm, working width 1800 mm, minimal working width 900 mm, for cotton fabrics 80 to 250 GSM g/m2
bore capacity in steel (diameter): 16 mm spindle taper: MK 2 turning speeds: 340 - 2200 U/min table surface area: 243 x 243 mm quill stroke: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU271W404 LocationBarneveld MakeConthermo TypeSBE 50 No.10190007 Year of construction2002 Main Features MaterialStainless steel Volume50 Ltr. Motor3 KW Specified Features - Cooking pan Stirring-cooking vesselcheck Capacity50 l Vessel sizesDia. 700x530 mm Flat bottomcheck OutletDN50 With covercheck Electric heatingcheck 2,7 kW, 400 volt With propellor stirrercheck With motor0,38 kW, 400 volt, 1420 rpm With variable speed drivecheck Speed mixing shaft1420 rpm MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Total height1,30 m Weight210 kg CEcheck Floorspace1,0 x 1,0 m Extra SpecificationsTemperature max 80°C, with temp controlCooking pansConthermoStirring vessels > Cooking pansBrand > Conthermo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...
maximum number of results exceeded
please refine your search
