129,810 used machines on RESALE, but how to find them? Machine Search
MTF Technik type GL-HM 010 mobile conveyor, conveyor length approx. 4600 mm, conveyor width approx. 175 mm, working height adjustable from approx. 750 up to 1050 mm conveyor speed adjustable from approx. 9 up to 25 m/min., electrics 230V/50Hz.
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m -Roll width: 1200 mm -Roller diameter: 83 mm -Roller spacing: 200 mm -Dimensions: 3600/1220/H265 mm -Weight: 206 kg
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 1,99 m -Roll width: 630 mm -Roller diameter: 90 mm -Roller spacing: 200/300 mm, adjustable by 100 mm -Dimensions: 1990/800/H300 mm -Weight: 107 kg
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered -Roll width: 795 mm -Rollers: Ø 90 mm -Roller spacing/axle distance: 100 mm, 10 rollers are missing, see photos -Total length: 3.73 m -Transport dimensions: 3730/970/H155 mm -Weight: 307 kg
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive motor -Roll width: 1160 mm -Rollers: Ø 90 mm -Roller spacing/axle distance: 200 mm, 2 wheels are missing, see photos -Total length: 2.49 m -Transport dimensions: 2490/1230/H95 mm -Weight: 145 kg
Key data: 750 mm, 500 mm, 600 mm
Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis
Condenser Guntner Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057,2 / 920.7 kW Air flow: 279 000/229 000 m3/h Number of fans: 10 x 900 mm Dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Volume: 323.8 L Quantity in stock: 2 Stock number: SK 108 Condition: Used
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.6 kg
Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: HACO, control panel with foot switch from press brake type PPES 30135 -Footswitch: Amber, with 2 pedals -Connections: see photos -Dimensions: 800/740/H1095 mm -Weight: 25 kg
CNC control, card slot, control cards, plug-in cards, circuit boards, control -Manufacturer: Robosoft, Control Unit from HACO press brake type PPES 30135 -Type: HACC 013 -Dimensions: 100/85/H80 mm -Weight: 0.2 kg
Specifications: SEW Movigear Drive Motors/ Motor Quantity: 11 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/
CNC control, card slot, control cards, plug-in cards, circuit boards, control -Control card: from press brake HACO type PPES 30135 -Type: HACE 032 -Dimensions: 95/70/H50 mm -Weight: 0.1 kg
CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board, main relay board -Manufacturer: Robosoft, main relay board from press brake HACO type PPES 30135 -Type: PC15 PPESV2 -Board: 338-0149V3 -Dimensions: 400/200/H85 mm -Weight: 2.2 kg.
Recon Part Number: 1216 3130 Gas & Diesel Connecting rod bushing new Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Conveyor belt, belt conveyor, conveyor belt, belt conveyor, steep conveyor, steep conveyor, chip conveyor, chip conveyor -Conveyor belt: conveyor belt -Speed: 25 m/min -Strap width: 450 mm -Conveying length: 795 mm -Engine/gearbox: WEG OCG 532 0.08 kW -Total dimensions: 800/670/H155 mm -Weight: 23 kg
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN16 -Quantity: 1x valve available -Dimension: 180/140/H280 mm -Weight: 7.2 kg
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN20 PN16 -Quantity: 1x valve available -Dimension: 150/130/H260 mm -Weight: 4.4 kg
Key data: 800 mm, 600 mm, 600 mm
Machine Details Stock-No. 1105-03955 Type of machine Machining Center - Universal Make HERMLE Type C 800 U Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time CALL ME Freight basis EX WORK Technical details x-travel 800 mm y-travel 600 mm Z-Travel 500 mm control TNC 426 HEIDENHAIN turning speeds 15000 1/min taper ISO ISO 40 tool change unit 98 spindle 15 kW Additional information 5-axis machine with round-swivelling table, NC-swivelling table dia. 290mm,A-axis from -110° - +110°, B-axis 360°, Laser tool measuring system Ethernet interface, EXTRA MAGASIN 96 TOOLS flush gun, lots of accessories,
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered -Roll width: 395 mm -Rollers: Ø 50 mm -Roller distance/axle distance: 125 mm -Conveying length: approx. 1375 mm -Transport dimensions: 1500/440/H145 mm -Weight: 11.6 kg
Containers, transport containers, sea containers, steel containers, ISO containers -Container: Steel container with underframe, can be driven under -Container interior dimensions: 6930/2450/H2350 mm -Gross weight: 6000 kg -Transport dimensions: 7200/2500/H2570 mm -Transport weight: 2880 kg
Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Manufacturer: Stöber, frequency converter type -Input: 3x 400 V - 50/60 Hz -Output: Hertz 0-150 Hz max. 4 kVA -Dimensions: 270/100/H300 mm -Weight: 5.9 kg
Key data: 1050 mm, 560 mm, 560 mm
Machine Details Stock-No. 1105-03956 Type of machine Machining Center - Vertical Make MORI SEIKI Type MV 55 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex site Price Technical details x-travel 1050 mm y-travel 550 mm Z-Travel 560 mm control FANUC O M table-size 1,400 x 550 mm max. table load 1500 kg turning speed range - milling 6000 rpm tool taper BT 50 Tool changer 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 12 kg power capacity - milling spindle 7,5 / 11 kW rapid traverse X-axis 15 m/min rapid traverse Y-axis 15 m/min rapid traverse Z-axis 12 m/min Feed 0.001 ~ 5.000 mm/min spindle bearing diameter 100 mm total power requirement 35 kW weight of the machine approx. 10 t dimensions of t ...
Key data: 1650 mm, 850 mm, 790 mm
Machine Details Stock-No. 1105-03958 Type of machine Machining Center - Vertical Make kafo Type WMC 1675 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time CALL ME Freight basis EX WORK Price Technical details x-travel 1650 mm y-travel 850 mm Z-Travel 790 mm Dist. Milling Spindle - Table Surface 150 - 760 mm Table dimensions 1900 X 850 mm table load capacity 1500 kg Spindle motor 15 kW spindle speed: 6000 2 STEEP spindle taper BT 40 Rapid traverse 20 m/min tool change unit 24 places Weight of tools max. 14 kg CNC Controller: Fanuc 15M total power requirement 30 KVA weight of the machine approx. 14 t Additional information - In Excellent condition - With machien documents - Rigid taping -fanuc oM
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1680 mm -Recordings: M10 -Quantity: 1 piece available -Dimensions: Ø 60 x 1680 mm -Weight: 7.1 kg
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1370 mm -Shots: M10 -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 1370 mm -Weight: 5,7 kg
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1250 mm -Shots: M10 -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 1250 mm -Weight: 5,7 kg
Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Diameter: 60 mm -Total length: 840 mm -Shots: 15/12 mm / Ø15 mm M10 see photos -Quantity: 1 piece available -Dimensions: Ø 60 x 840 mm -Weight: 3.6 kg
Connectors, plugs, sensor modules -Manufacturer: Wago, Winsta ECBT2 connectors, 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6 boxes of 25 pieces each available -Price: per carton -Cardboard dimensions: 200/185/H55 mm -Weight: 0.6 kg/carton
Vibration conveyor, vibratory conveyor, vibration feeder, feeding device, spiral conveyor, vibration filler, vibratory spiral conveyor, feeder-bowl -Manufacturer: Deprag, spiral conveyor vibration conveyor -Type: 0522-EP/0.75-1 -Connection: 230 volts -Transport dimensions: 500/420/H960 mm -Weight: 33 kg
Storage containers, transport storage containers -Storage container: made of stainless steel with 3 compartments, mobile -3 compartments: with container, see photos -Dimensions:1035/520/H640 mm -Weight: 48 kg
connecting cable, connecting line -Manufacturer: Wago, connecting cable 2-pin with plug type 769 -Cable length: 1400 mm -Number: 19x cables available -Price: per piece, minimum order 2 pieces -Transport dimensions: Ø 240 x 20 mm -Weight: 0.1 kg/pc.
conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFTSP -Speed: m/min -Conveyor belt length: 830 mm -Belt spacing: 3x 500 mm -Conveyor width: 1500 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1900/900/H2150 mm -Weight: 219 kg
Table size 900x400 mm X Travel 750 mm Y, Travel 450 mm Z Travel 450 mm Spindle speed 12.000 rpm Controller Siemens 840D Sl Spindle taper SK40 Number of tools in magazine 24 Can be tested under power
Transnorm conveyor belt GF 4700-600-500 RA2120 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...
conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 560 mm -Conveyor width: 1000 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1450/1350/H750 mm -Weight: 135 kg
Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg
conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: conveyor belt with underframe -Speed: 23 m/min -Belt width: 100 mm -Conveyor length: 1040 mm -Total dimensions: 1040/350/H670 mm -Weight: 26 kg
SSI Schaefer Three-Piece Ascendant Conveyor Belt Manufacturer: SSI Schaefer Total length 6540 mm 1 x segment: 3960 x 470 mm 1 x segment: 1140 x 470 mm 1 x segment: 540 x 470 mm Belt width: 370 mm Left & right side guide Height: 700 - 1600 mm Gradient: approx. 8° 14% Geared motor: Manufacturer: SEW-Eurodrive Type: WA20DT71D4 Operating voltage at 50 Hz: 220 ... 240 V / 380 ... 415 Y Current consumption at 50 Hz: 2.15 / 1.24 A Speed at 50 Hz: 1,380 / 135 rpm Power: 0.37 kW Degree of protection: IP 54 More items new and used - can be found in our shop! International shipping costs on request!
SSI Schaefer Two-Piece Ascending Conveyor Belt Manufacturer: SSI Schaefer Total length 5900 x 600 mm 1 x segment: 4700 x 600 mm 1 x segment: 1200 x 600 mm Belt width: 600 mm Total width: 690 mm Left & right side guide Height: 800 - 1600 mm Gradient: approx. 8° 14% Geared motor: Manufacturer: SEW-Eurodrive Type: WA20DT71D4 Operating voltage at 50 Hz: 220 ... 240 V / 380 ... 415 Y Current consumption at 50 Hz: 2.15 / 1.24 A Speed at 50 Hz: 1,380 / 135 rpm Power: 0.37 kW Degree of protection: IP 54 More items new and used - can be found in our shop! International shipping costs on request!
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 1x transport rollers available -Dimensions: Ø 90 x 780 mm -Weight: 8 kg
EPS contour cutting line for the production of sloping roof, fillet and ridge panels, as well as freely programmable "contours". suitable for net block dimensions: 5300 x 1300 x 1300 mm. Version with oscillating panel cutting frame for the production of EPS sheets and special cuts. incl. block turner incl. automatic wire adjustment incl. trimming frame incl. plate chain conveyor incl. waste disposal incl. wire break detection (electronically controlled) incl. extensive documentation Visits are possible at any time by arrangement.
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 3x transport rollers available -Price per piece -Dimensions: Ø 90 x 785 mm -Weight: 6.9 kg/pc.
Transnorm conveyor belt GF 2250-600-500 RA2056 Technical data: Conveyor length (NL): 2250 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of d ...
Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side ...
roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven, 2 pieces -Roll width: 240 mm -Rollers: Ø 50 mm -Roller spacing/axle distance: 150 mm -Total length: 2040 mm -Price/Delivery: complete -Transport dimensions: 2040/300/H140 mm -Weight: 25 kg
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor rollers: Transport rollers diameter 98 mm -Transport width: 745 mm -Number: 4x transport rollers available -Price per piece -Dimensions: Ø 98 x 780 mm -Weight: 8.2 kg/piece
maximum number of results exceeded
please refine your search
