compressor used for sale

Manufacturer: Boge, Type: VLEA 7,5 R-7, Year: 1990, Schraubenkompressor: yes, Operating hours: 4899, Running idle houres: 1434, Revolutions of main rotor U/min: 4480, Drive power kW: 7,5, Volume flow rate m³/h: 1,05, Max. Betriebsdruck : 8, Year :1990

Manufacturer: Boge, Type: Flex 37-12, Volume flow m³/min: 5,1, Operating hours: 43060, Running idle houres: 2224, Final compressed pressure bar: 10, Revolutions of main rotor U/min: 5205, Drive power kW: 37, Volume flow rate m³/h: 5,1,

Manufacturer: Boge, Type: D 63, Control: Elektrisch, Volume flow m³/min: 375, Drive power kW: 0,96, Kühlluftbedarf m³/h: 1300, Compressed air min/max bar: 2-16,

Sell several CO2 compressors, in good working order. Make bid for the lot

A very clean and working vacuum compressor. 2m3 per hour, 0,85 bar. One faze 220 V. Can ship worldwide.

Motor power 11kW/ max. ultimate pressure 13bar Regular maintenance

Engine power 11 kW / max. final pressure 13bar Regular maintenance Engine should be replaced promptly

Refrigerant compressors system Bitzer -Type: 6H-25.2Y-40P (x7), 6HE-28Y-40P (x1) -Volume: 110.5 m3/h (x7), 111 m3/h (x1) -Cooling capacity for R404A: 605 kW at -5°C/40°C, 500.8 kW at -10°C/40°C, 260 kW at -25°C/40°C -Dimensions: 5100 x 800 x 1850 mm -Items in magazine: 1 -Reference number: Z 101 -Condition: Used in good condition

Compressor, compressor two-stage type S6H-20.2Y, displacement 73 m3/h For blast freezers or deep freezes. Needed two pcs., checked in stock.

power requirement: 37 + 55 kW Pressure power: 8 bar EXW 92536 Pfreimd - loaded free on truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar total power requirement: 11 kW Year: 1995 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 2313 control: SAM 8/4 rated current: 0,7 - 0,35 A frequency: 60 Hz : 100-240 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine: 220/380/420 V ampere: 4.75/2.75 A motor speeds:: 1420 U/min. engine output: 1,1 kW weight: 100 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 7,5 kW feed pressure: 10 bar weight of the machine ca.: 300 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 711- 00 37 48 total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 13 bar Effective free air delivery: 690 L/min Receiver capacity: 270l / 16bar l / bar weight of the machine ca.: 199 kg. motor: 400V / 5,5KW V / KW range L-W-H: 1,7 x 0,6 x 1,27 mm It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 120/220 L/min Receiver capacity: 50l / 10bar l / bar weight of the machine ca.: 24 kg. Number of cylinders: 1 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 1,1 x 0,32 x 24 mm This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 125/85 L/min Receiver capacity: 24 / 8 l / bar weight of the machine ca.: 22,5 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 600 x 310 x 510 mm Exhibition machine This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An Atlas Copco oil-free compressor is available.Technology: oil-free scroll compression, max. operating pressure: 7.8bar, volume flow: 13.4l/s or 48.2m³/h, motor power: 7.4kW, speed: 2885rpm, machine dimensions X/Y/Z: approx. 1600mm/750mm/1850mm, machine weight: approx. 400kg.

feed pressure: 8 bar Effective free air delivery: 250/350 L/min Receiver capacity: 200l / 10bar l / bar weight of the machine ca.: 105 kg. Number of cylinders: 2 Stk. motor: 230V / 2,2KW V / KW range L-W-H: 1140 x 510 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible.

Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.

Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.

A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.

feed pressure: 8 bar liter capacity: 1,65 m³ / min dimensions: 1000 x 750 x 950 mm total power requirement: 11 kW weight of the machine ca.: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: ? kW feed pressure: ? bar liter capacity: ? l weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,211,5 m Nr. 4324 Screw compressor BOGE S20 Currently not ready for operation - Cause unclear / unchecked Presumably fault on circuit board Transport dimensions approx. 1200 x 1000 Weight approx. 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 bar liter capacity: 1400 m³ / min dimensions: 700 x 550 x 1100 mm total power requirement: 11 kW weight of the machine ca.: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 bar liter capacity: 2,66 m³ / min total power requirement: 18,5 kW motor speeds:: 3000 min/1 dimensions: 1200 x 900 x 1200 mm weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two stage compressor Bitzer S4N-8,2Y +ECO + K203H. Comperssor is working and in very good condition. Just need to connect the economizer and condenser.

Blitz Screw Compressor+ Blitz Refrigeration Dryer+ 2000 ltr. Compressed air tank 11 bar, compressor engine 37 Kw., 5.2 cbm/min. 10 bar

Max. pressure: 8 bar control voltage: 24 Volt total power requirement: 15 kW Number of working hours: 20.563 h - Maximum pressure: 8 bar - Delivery quantity: 2,57 m³ / min - Nominal power: 15 kW - Control voltage: 24 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressure: 8 bar control voltage: 24 Volt total power requirement: 15 kW Number of working hours: 39.819 h - Maximum pressure: 8 bar - Delivery quantity: 2,57 m³ / min - Nominal power: 15 kW - Control voltage: 24 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Worthington Creyssensac RLR208B500G10 Air compressor 2015, air compressor and dryer, 8Bar, mounted on 500L tank, 3Ph

Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Manufacturer: Bitzer Model: 2JES-07Y-40S Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 400V / 3Ph / 50Hz Shipping Weight: 50 kg Net Weight: 43 kg Compressor Details: • Type: Semi-Hermetic Piston Compressor • Series: CE1 • Number of Cylinders: 2 Ncebjwudyqemy Ex Ipou • Flow Volume: 5.21 m³/h • Compression Type: Piston • Oil Type: BSE32 (BSE55 for R134a, R450A, R513A, R1234yf if tc > 70°C) • Oil Charge: 1.0 L Electrical Data: • Starting Current (LRA): 14.8 A • Max Operating Current: 3.7 A • Max Power Consumption: 1.9 kW Refrigerant Compatibility: R134a, R450A, R513A, R1234yf, R404A/R507A, R448A/R449A, R454C, R455A, R407F Pipe Connections: • Suction Line: 16.0 mm (5/8") • Pressure Line: 12.0 mm (1/2") Sound Power Level: 63.0 dB(A) at +5°C / 50°C Dimensions: • Width: 220 mm • Height: ...

New DWM Copeland D2DC3-50X-AWM Semi-Hermetic Compressor – 16.8 m³/h – 380V – 28 bar Manufacturer: DWM Copeland Model: D2DC3-50X-AWM Nobmswudz Ijy Ex Ipecu Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 380–420V (Y) / 3 Phase Power Consumption: 9 A Flow Rate: 16.8 m³/h Maximum Pressure: 28 bar Transport Weight: 158 kg

On offer are 2 pieces of CompAir compressor systems with cooler and dryer as shown in the pictures. Price refers to an investment. If you have any questions, please contact us.

Kompressor / Compressor Gardner Denver KTA100-1C Baujahr / Year 2007 - SN. 2708758 100 m3/h

Kompressor / Compressor Gardner Denver CLFG 41 V (01) Baujahr / Year 2011 - SN. 61.123.1401-01 Luftstrom / Capacity 4,0 / 48,0m3/h 1,5/1,8 kW / 1420/1730 /min Überholt / Overhauld 2015

Kompressor / Compressor Gardner Denver SKG-275.2V.02 (60) Seitenkanalverdichter Baujahr / Year 2007 - SN. 2750748 Luftstrom / Capacity 100 m3/h SI 1,5/1,8 kW / 2800/3400min Überholt 2014 / Overhauld 2014

Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW Abmessungen / Dimensions 200 x 80 x 150 cm Gewicht / Weight 730 kg

Kompressor / Compressor Gardner Denver KLT 15 (03) Baujahr / Year 2007- SN. 2740657 Luftstrom / Capacity 15/18 m3/h S1 0,75/0,9 kW / 1400/1710 /min DAS IST EIN TEST

power capacity: 4 kW feed pressure: 10 bar liter capacity: 490 Lieter / min Receiver capacity: 350 l motor speed: 1500 U/min voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m • 2 piston-compressor with tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.

Ecoair C10 screw compressor, replacement machine

Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used

Key data: 132 , 40 , 750

Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours