compressor used for sale

400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.

160 kW, max. 7.5 bar, 26.88 m3/min.

160 kW, max. 7,5 bar, 26,88 m3/min.

75 kW, max. 8.60 bar, 11.20 m3/min. oil-free, air-cooled.

Package - Kaeser KW 11 - KW 250

75 kW, max. 8,60 bar, 11,20 m3/min. Oil-free, air cooled.

110,0 kW, max. 3,50 bar, 23,22 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132,0 kW, max. 3,50 bar, 24,30 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132.0 kW, max. 2.35 bar, 34.62 m3/min. oil-free, air-cooled.

132,0 kW, max. 2,20 bar, 43,02 m3/min. Oil-free, air cooled. 2 pieces available.

200,0 kW, max. 8,60 bar, 30,72 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 hours. New controller Elektronikon Mk4.

75.0 kW, max. 10 bar, 12.44 m3/min. With built-in compressed air dryer.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...

75,0 kW, max. 10 bar, 12,44 m3/min. With built-in compressed air dryer.

75.0 kW, max. 7.50 bar, 13.80 m3/min.

75,0 kW, max. 7,50 bar, 13,80 m3/min.

75 kW, max. 10.50 bar, 11.70 m3/min

75 kW, max. 8.0 bar, 12.0 m3/min.

200 kW, max. 8.50 cash, 36.80 m3 / min.

132 kW, max. 11 bar, 20.3 m3/min. screw element new in 2001 and has 38000 operating hours.

Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 t dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

50,0 kW, max. 13,0 bar, 7,90 m3/min. With built-in frequency inverter. Volume flow 5,93 - 7,9 m3/min.

160 kW, max. 7.5 bar, 27.80 m3/min oel-free, water-covered. Elements have 32000 operating hours.

160 kW, max. 7,5 bar, 27,80 m3/min oil-free, water cooled. Air ends have 32000 working hours.

250 kW, max. 10 bar, 37.60 m3/min, oil-free, water-covered.

250 kW, max. 10 bar, 37,60 m3/min, oil-free, water cooled.

250 kW, max. 10.50 bar, 34.86 m3/min. oil-free. Low and high pressure elements are now Mk2 outing and have 13000 operating hours.

250 kW, max. 10.50 bar, 34,86 m3/min. Oil-free. LP and HP air ends are new Mk2 version and have 13000 working hours.

90 kW, max. 8.35 bar, 13.20 m3/min. Oil-free, water-free, with built-in adsorption dryer IMD 260. Excellent condition.

90 kW, max. 8,35 bar, 13,20 m3/min. Oil-free, water cooled, with built-in adsorption dryer IMD 260. Excellent condition.

45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.

315 kW, max. 12.0 bar, 46.40 m3/min. condition as new.

315 kW, max. 12,0 bar, 46,40 m3/min. Condition like new.

55 kW, max. 13 bar, 9,72 m3/min. With built in frequency inverter. Volume flow 1,6 - 9,72 m3/min.

55 kW, max. 10 bar, 7,80 m3/min.

55 kW, max. 10 bar, 7.80 m3/min.

75.0 kW, max. 7.50 bar, 12.90 m3/min.

160 kW, max. 8.5 bar, 30.60 m3/min. New level in 2007 and has 26000 operating hours.

160 kW, max. 8,5 bar, 30,60 m3/min. New air end in 2007 and has 26000 working hours.

450.0 kW, max. 7.5 bar, 68.64 m3/min. oil-free. Water-ceded. With gentle start. New engine in 2009. Service reports available.

450,0 kW, max. 7,5 bar, 68,64 m3/min. Oil-free, water cooled, with soft start, new motor in 2009, service records available.

50.0 kW, max. 7.61 bar, 8.60 m3/min. oil-free. Air-cooled. Frequency controlled. Volume flow 2.6 - 7.6 m3 rpm.

50,0 kW, max. 7,61 bar, 8,60 m3/min. Oil-free. Air cooled. Variable speed drive. Volume flow 2,6 - 7,6 m3/min.

Advantages of Aflatek SilentPro100-3: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions(length x width x height), mm: 1010x415x710 Weight, kg: 68 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Silent10-1: -Compact design. -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data: Power supply , V: 230 Motor power, W: 1x550 Motor speed, Rpm: 1440 Air supply, L/min: 70 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 50 Air tank, L: 10 Dimensions(length x width x height), mm: 520x200x470 Weight, kg: 16 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 560x240x515 Weight, kg: 17 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Silent50-2 EXC: -Water Separator -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data: Power supply , V: 230 Motor power, W: 2x600(1200) Motor speed, Rpm: 1440 Air supply, L/min: 150 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 53 Air tank, L: 50 Dimensions(length x width x height), mm: 830x370x630 Weight, kg: 36 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 865x390x660 Weight, kg: 41 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

water cooled , 2 KW , 400 PSIG ,

355 kW, 7.5 bar, 63.10 m3/min