compressor up to used for sale

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools Auction-ID: A1-40256-129

With content Auction-ID: A1-46547-118

Indicates various faults The vehicle has not been technically inspected or checked. The seller does not provide any guarantees with regard to the technical condition, operation or completeness. Any defects, both visible and hidden, are entirely at the expense and risk of the buyer. Auction-ID: A1-42017-186

unused; tools wrapped in plastic; 12-piece pliers set; 13-piece hammer set; 14-piece measuring set; 36-piece impact wrench set; 21-piece keys with T-handle; 41-piece screwdriver set; 29-piece combination wrenches; 12-piece ring wrenches; 125-piece dab set; 84-piece mouthguard set; 6443 Auction-ID: A1-46416-329

258 pieces; screwdrivers; bitset; pliers; keys; etc; swivel wheels with brakes; 7 drawers; 6 filled; Auction-ID: A1-46416-600

With content Auction-ID: A1-46547-120

Nice compact tool case incl. 86 pcs tools, with robust exterior. Ideal to take with you on a job or to have in the garage for emergencies. Packing size 51x25.5x22.5cm Auction-ID: A1-40256-131

Mobile; telescope handle; combination locks; unused in box; 5182; Auction-ID: A1-46416-608

4 drawers filled; mobile; lockable; drawer 1 Socket set 1/2\" and 1/4\" 4 to 32 and accessories; Drawer 2 stitch ring wrench set 8 to 22 torx allen set bits; drawer 3 screwdrivers and allen set; drawer 4 pliers, hammer, pin drivers; tray 4 & 5 are empty for storage; 5769 Auction-ID: A1-46416-614

Buyer is responsible for disassembly. Dimensions wall plate: 35x90CM Auction-ID: A1-46547-324

Mains connection: 400 VAC; 50 Hz Power consumption: 6kW; 11.5 A Max. fuse: 16 A Detergents: Aqueous cleaners Capacity: 120l Compressed air connection min 5bar Auction-ID: A7-46802-2

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-46416-617

Tool case incl 144 pcs tools Auction-ID: A1-40256-135

1x 1/4\" torque wrench with 72-tooth drive (range: 5-25 N/M) 1x 3/8\" torque wrench with 72-tooth drive (range: 10-60 N/M) 1x 1/2\" torque wrench with 72-tooth drive (range: 40-220 N/M) 3x Impact sockets (1/2\"): 17mm, 19mm, 21mm 3x Sockets (1/2\"): 17mm, 19mm, 21mm 3x Extensions: 1/4\" x 3\", 3/8\" x 3\", 1/2\" x 5\" 2x Universal couplings (1/4\" & 1/2\") 16x Bit sockets (1/4\"): PH1, PH2, PH3, T10, T15, T20, T25, T30, H2, H2.5, H3, H4, H5, H6, H8, H10 2x Spark Plug Wrenches (14mm, 16mm) with thin wall, 3/8\" drive for BMW unused Auction-ID: A1-40256-77

With content Auction-ID: A1-46547-119

7 Drawers of which 6 filled, 2x Swivel wheel with brake Auction-ID: A1-41996-114

4 piece cordless tool set; screwdriver, impact wrench, drill and grinder. Includes 2 batteries, charger and various accessories in case. Cordless power tools set Auction-ID: A1-40256-45

12 Drawers of which 10 filled, 2x Swivel wheel with brake Auction-ID: A1-41996-111

equipped with tools 274 pieces; 4 wheels, 2 of which have brakes; steering committee; worktop; 7drawers; 1 lockable cabinet with shelf; 2 key sets; unused in box; 2419; Auction-ID: A1-46416-605

Professional tool trolley, 7 drawers filled with 266 pcs tools. 2 keys. Auction-ID: A1-40256-93

Cart with detachable top box; top box with 8 drawers and top lid; Cart with 5 drawers and cupboard with double doors; 13drawers - 9 filled; 2 swivel wheels, 2 of which are braked; 7212 Auction-ID: A1-46416-224

4 cylinder diesel engine, 4 wd driven, new blades fitted last season Auction-ID: A1-40138-249

Professional tool trolley, 13 drawers, 11 of which are filled with 298 pcs of tools. 4 keys, 2 casters Auction-ID: A1-40256-49

1 tool trolley and 1 trolley. Tool trolley 7 drawers, 260-piece set, all essential hand tools directly within reach, incl 2 keys AND a decent tool trolley, 4 trays incl 238 pcs tools, combination locks Auction-ID: A1-40256-127

Consisting of, among other things, various cabinets, 2 defective pallet trucks, waste bin, work clothing, hoses, hose clamps, connection material, mounting materials, bearings, maintenance products, LED lighting, paint, printers, office chairs, copper strips, empty tool boxes etcetera, from 2 rooms, note without the bookkeeping, machine books and coffee machines. Auction-ID: A1-46553-116

unused; tools wrapped in plastic; 12-piece pliers set; 13-piece hammer set; 14-piece measuring set; 36-piece impact wrench set; 21-piece keys with T-handle; 41-piece screwdriver set; 29-piece combination wrenches; 12-piece ring wrenches; 125-piece socket set; 84-piece mouthguard set; 7483 Auction-ID: A1-46416-527

12 Drawers of which 10 filled, 2x Swivel wheel with brake Auction-ID: A1-41996-112

267 pieces; 13 drawers, 11 of which are drawers filled; 12 pliers; 12 hammers; 8 Files ; 6 hexagon keys; 6 T-Handle ; 21 screwdrivers; 40 spanners; 10 Allen keys; 127 caps and bits; 25 keys ; wooden worktop; mobile; brakes; 2 parts lockable; 5595 Auction-ID: A1-46416-327

Tool trolley 12 drawers, 293 pcs AND an industrial vacuum cleaner 80 liters. Professional tool trolley, 12 drawers of which 11 filled with 293 pcs tools, Heavy equipment. 600 kg load capacity. Softclose mechanism. 2 swivel wheels and 4 keys. AND an industrial vacuum cleaner wet/dry, 80 liters, 3 motors a 1000w / per motor to be turned on, for wet and dry use. This vacuum cleaner is designed for maximum flexibility. Whether it's fine dust, coarse dirt or liquids: it sucks it all up Auction-ID: A1-40256-71

unused; tools wrapped in plastic; 12-piece pliers set; 13-piece hammer set; 14-piece measuring set; 36-piece impact wrench set; 21-piece keys with T-handle; 41-piece screwdriver set; 29-piece combination wrenches; 12-piece ring wrenches; 125-piece socket set; 84-piece mouthguard set; 7483 Auction-ID: A1-46416-528

Professional tool trolley, 12 drawers, 11 of which are filled with 293 pcs of tools Heavy equipment. 600 kg load capacity. Softclose mechanism. 2 swivel wheels and 4 keys. Auction-ID: A1-40256-128

Equipped with 4 drawers, with various contents. Auction-ID: A1-46547-325

Inner mast clearance, New tyres Viewing by appointment Auction-ID: A1-40252-44

Viewing by appointment! Auction-ID: A1-40252-42

Stroke of the Pinole: 125 mm. Auction-ID: A1-41996-170

YEAR 2001 ; The AM 02 Universal is an electro-pneumatic universal wire stripping plier, for the fast and reliable processing of bulk insulated Z+F terminals from 0.5 mm² to 2.5 mm² (AWG 20 – 14) with a crimping length of 6 mm to 12 mm. Optional additional tool kits are available for 0.34/4 mm² (AWG 22/12). Auction-ID: A1-46617-50

Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.

measuring range X-axis:150-300 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:450 mm tool diameter: mm tool taper: SK compressed air: bar dimensions: m machine weight ab.: kg clamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

measuring range X-axis:500 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:1000 mm tool diameter: mm tool taper: SK compressed air:4-6 bar dimensions: m machine weight ab.: kg Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

measuring range X-axis:-50 . 530/830/1030 mm measurement range Z =:605/805/1005 mm tool taper:30 & 40 VDI compressed air:6 bar dimensions:2200 x 1200 x 2100 m machine weight ab.:900 kg Vertical Toolsetter with Cutting Edge detection via Camera System. Operating over CNC Control yb PC System or Manually, 3 axes, CNC Equipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axis and Linear Roller bearing in all Axis of the Slide Carriage. Electronic measuring equipment: PC electronics with intelligent KELCH EasyVision image processing 17" TFT colour monitor Optional: second 17" TFT monitor for full screen measuring window The CNC Toolsetter is in good condition and ready for immediate use.

x-travel:600 mm y-travel:450 mm z-travel:400 mm Table area:700 x 480 mm spindle turning speed range:10 - 3150 U/min spindle taper ISO:40 quill stroke:80 mm dimensions of the machine ca.:1,8 x 2,1 x 1,9 m total power requirement:8 kW weight of the machine ca.:3,5 t Machine with universal turn, sviwel and tilting table - CNC control DIALOG II - splash guards - misc. parts

x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t

Keyence Digital Measuring Projector ? Model XM-1600 General: Digital measuring projector with a high resolution image measurement system and very easy operation. Place the part on the stage and measure by pressing a button. Supports automated measurements of up to 300 dimensions within seconds. Measuring Head / Control Unit: ·Sensor: Monochrome CMOS 1 inch, 20 megapixels ·Display: 12.1 inch LCD monitor (WXGA 1280 x 800) ·Lens: Double telecentric lens Measuring Field and Measuring Range: ·Standard measuring field: approx. 100 mm diameter ·Precision mode measuring field: approx. 25 x 25 mm Measurement Accuracy and Repeatability: ·Display resolution: 0.1 micrometer ·Repeatability (standard, without stage movement): approx. plus minus 1 micrometer ·Precision mode (without stage movement): approx. plus minus 0.5 micrometer Stage / Travel Axes: ·XY measuring stage: motorized ·Z axis ...

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:710 x 410 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 B table load:180 kg no. of flutes:8 groove width:14/25 mm tool taper:SK 40 speeds::20 - 3000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Year:ca. 1984 Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:400 x 710 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 table load:180 kg no. of flutes:8 groove width:14/45 mm tool taper:ISA 40 speeds::20 - 3000 /28- 4000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Documents:inkl. Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

total power requirement:2,4 kW weight of the machine ca.:1150 kg dimensions of the machine ca.:1550 x 1615 x 1630 mm table clamping surface LxW:315 x 710 mm max. tool weight:200 kg T - slots distance:63 mm T - slots - width:12 mm taper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/min feed speeds:11,2 -355 mm/min Documents:vorhanden

x-travel:600 mm y-travel:400 mm z-travel:380 mm total power requirement:6 kW weight of the machine ca.:1700 t dimensions of the machine ca.:1800 x 2130 x 1980 mm Table dimensions:400 x 800 mm T-slots:7 St.,14 x50 table load:300 kg spindle:SK40 turning speed range:63-250 U/min speed steps work spindle:18 spindle speeds::50- 2500 n/min feeds:10-500 mn/min Documents:vorhanden

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine without toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device

tool clamping area:diverse mm weight:0,1 t appr. 45 ISO 40 arbors, package or single sale Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.