compressor up to used for sale

This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine.

Knoll High Pressure System KF 110/700 Year of Make: 2017 Paper Belt Filter Tank capacity: 600 litres Mas. Pressure: 70bar Little used. Like new

This COMCO CTR201-2 was manufactured in 2022. It features 1,264 machine hours and comes with a variety of options including a magnifier MB4320-1, abrasive hose MB1233-25, and replacement HEPA filter assembly CTR280-1. Additional parts include conductive nozzles and a 100 Micron Wheat Starch supply. Contact us for more information.

This OTEC DF10 was manufactured in 2016. It features a stainless steel process container and jog mode for easy workpiece changes. Includes additional storage for workpieces and holders, accommodating up to 10 holders. Equipped with water cooling DF-7 and a cooling compressor, its suitable for ambient temperatures between 10-40°C. Ideal for efficient media mixing and tool handling. Reach out for more information.

WKZ spindle SK40 Used

This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us.

This MEMMERT UN110 was manufactured in 2021. It features a working temperature range from 20 to 300°C, with a setting accuracy up to 0.5°C for precise control. The unit has a volume of 108 liters, ideal for various laboratory applications. Consider the opportunity to buy this MEMMERT UN110. Contact us for more information.

This 3-axis Sodick Picka PF-32A was manufactured in 2010. Its an electron-beam processing machine designed for high-precision surface treatments. Features include a vacuum chamber, a max workpiece size of 300 × 200 × 100 mm, and a beam diameter of up to 60 mm. Ideal for applications requiring fine finishing. Contact us for more information.

This machine tool was manufactured in 2016. The BREUNING SIMAG 80.1 R 3000 features a multi-channel loading magazine IV, 8 guide channels with high-performance oil flow, and PLC control with an integrated touch screen terminal. It supports material diameters of 40-80 mm and lengths of 1500-3000 mm. Ideal for handling heavy loads up to 850 kg. A great opportunity to buy this BREUNING SIMAG 80.1 R 3000 machine tool. Contact us for further details regarding this machine tool.

This INGRAMATIC RP72 L was manufactured in 2012. It features a double starter unit with TR7 dies, capable of threading diameters from M14 to M20. The machine operates at speeds up to 120 rpm, powered by a robust 45 kW motor. Weighing 15,000 kg, it is in very good condition and ready for immediate shipment. CE compliant and includes Brankamp control process. Contact us for more information about this machine.

This AMT AHDR 500/1600 was manufactured in 2018. It features a coil diameter of 1600 mm and a spreading range of 250–650 mm, powered by dual 0.75 kW reel drives. With a total weight of 1200 kg and a through height of 1200 mm, its in excellent, like-new condition with zero operating hours. Contact us for more information about this machine.

This CAMFIL Quantum Series 2 was manufactured in 2020. It features a robust steel construction, designed for continuous industrial use with a motor power of 4 kW and airflow of approximately 2,000 m³/h. Ideal for metalworking processes, it includes an energy-saving fan and a maintenance-friendly design with easily accessible filter elements. Consider the opportunity to buy this CAMFIL Quantum Series 2. Contact us for more information about this machine.

This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine.

This WIPOTEC SC 30 was manufactured in 2023. It features a high-speed operation with a capacity of up to 240 pieces per minute and a scan width of 320 mm. The system includes stainless steel construction, intuitive touchscreen controls, and an industrial high-performance X-ray unit for precise foreign object detection. Ideal for efficient and accurate sorting operations. Contact us for more information about this machine.

This MIKRON Multistar CX-24/500R was manufactured in 2009. It features a high production capacity with up to 280 pcs/min in multiple cycles and a main motor power of 2.2 kW. The machine accommodates a maximum workpiece diameter of 24 mm with swivel clamp and operates efficiently with a spindle rotation speed up to 32,000 rpm. Ideal for high-volume production environments. Contact us for more information about this machine.

Manufacturer: DMG Model: ECO 210 Year of Manufacture: 2007 Electrical Data: Voltage: 230 V Frequency: 50 Hz Power Consumption: Max. 650 VA Find more here - / Contact us at -

This 3-axis LORENZ LS 150 was manufactured in 2015. It features a connected load of 60KVA, a rated current of 50A, and operates on a 400V system. Weighing 7000kg, this machine has been modernized to enhance performance. If you are looking to get high-quality milling capabilities, consider the LORENZ LS 150 machine we have for sale. Contact us for more information.

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4, 3/8, and 1/2, including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4, 3/8, ...

Amada HFE 80-25 Year: 11/ 1999 Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 mot. adjustable back gauge Stroke: 200 mm Projection: 420 mm Crowning Working height: 960 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons

Package Tool Holder VDI 30 Make: EWS Drill rod holder D= 8, 10, 12, 16, 20, 25, 32, 40mm Collet Holder ER 16, ER 25, ER 32 Turning steel holder outside left and right There are about 250 pieces available Also to be handed in individually Other images such as VDI 40, SK 40, HSK 63 and images on request

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 500 mm, 400 mm

Roboform 350 + Erowa Robot Compackt 44-Fold Electrode Changer This die-sinking EDM machine offers precise machining with a wide range of features. Details: Year 2006 Travels: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg Accessories: incl. Erowa zero-point clamping system on table WITHOUT electrode holder

Details: Year of construction 2021 The Haimer Power Clamp Economic Plus NG is a high-performance shrink device that is known on the market for its high reliability and precision. Its low power consumption and robust construction make it an ideal choice for any workshop. Technical data: Power consumption: 1.5 kW Shrink range: 3 - 32 mm Dimensions (L x W x H): 600 x 800 x 1200 mm

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Travel X/Y/Z: 600mm/400mm/420mm, feed rate X/Y/Z: 6m/min, rapid traverse: 6m/min, spindle power: 8kW, speed: 4500rpm, quill stroke: 75mm, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 2800mm/2200mm/2100mm, weight: approx. 2800kg, control: Heidenhain 415B, hours: approx. 56193h. Includes cooling lubricant system and 3D measuring probe. The brake of the Z axis is to be replaced. Documentation available. An on-site inspection is possible.

Tool milling machine DECKEL FP 2 LB 3 axis digital display maintained original condition - 3-axis digital display - Travel X/Y/Z: 795 × 300 × 400 mm - Automatic feeds and rapid traverses in all 3 axes (18 stages) - Spindle speeds: 40–2000 rpm (18 steps) - Horizontal and vertical milling equipment - ISO 40 tool holders - Table clamping surface: 1000 × 440 mm - Swivelling vertical head with drilling quill - Coolant device - Various tool holders - Documentation available L×W×H 2.5×2.4×1.8 meters / Weight 2200Kg

Tool milling machine DECKEL FP 2 LB from university in well-maintained original condition -3 - Axis digital display "ACURITE" -Travel X/Y/Z 795x300x400mm -Automatic feeds / rapid traverses in all 3 axes (18 pieces) -Spindle speeds 40-2000 rpm (18 pieces) -Horizontal + vertical milling device - ISO 40 - Tool holders -Table clamping surface 1000x440mm -Table clamping surface with additional table 1000x700mm -Vertical head swivel with drilling quill -Coolant device -Various tool holders -Machine light -Documentation Dimensions: LxWxH 2.5x2.4x1.8 meters / Weight 2200Kg

A used manual tool grinding machine from Saacke is offered. Table size X/Y approx.: 850mm/145mm, travels X/Y/Z approx.: 450mm/250mm/250mm, center height approx.: 125mm, max. grinding length approx.: 500mm, machine dimensions X/Y/Z approx.: 1500mm/1100mm/1500mm, weight approx.: 850kg. Inspection by appointment possible.

Horizon Vac 100 a+c, Year 2005 10 Station Vac 100a 10 Station Vac 100c 1 x PJ-77R Jogger 1 x Stitch & Folder SPF-20A 1 x Fore-Edge Trimmer FC-20A Etc. Available: immediately

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

Stock number: F947, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Check weigher, Construction: Blowing station for fail weighing, Conveyor: W 130 x L 800 mm., Weighing area: 0-600 g., Manufacturer: Mettler/Garvens, Type: VC2, Other: The machine is defective and sold as spare parts

length: 560 mm width: 730 mm height: 1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Straight and angle driven toolholders for Mazak Multiplex series lathes. When purchasing the set, I will make it an attractive price.

DMG Microset UNO 115 CNC tool measuring machine for sale. This professional device is used to set and measure cutting tools before machining. It allows for precise determination of tool length, diameter, angle, and radius, reducing machine setup time and increasing production accuracy. The UNO 115 model is one of the most popular solutions used in CNC machining centers – ideal for manufacturing companies, tool shops, and workshops requiring repeatability and high quality. Technical condition: excellent, ready for operation. Year: 2008

I'm selling static tool holders for Mazak Multiplex, QTN, Qt, SQT, etc. As shown in the photos. Please contact me for details. Available for cylindrical and square tools. I can offer a better price for larger orders.

WE SELL AN NICE CONDITION HERMLE C40U FULLY EQUIPED WITH COMPLETE FULL TOLS ACCESSORIESS MACHINE IS WORKING IN PRODUCTION DAILY ORDERS. THIS IS AN VERY NICE OPORTUNETEY MACHINE WILL BE AWAILIBLE IN NEXT WEEKS FOR PICKING UP TECHNICAL DATA: x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN iTNC 530 rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper SK 40 DIN 69871 spindle drive 15 kW max. torque on the spindle 130 Nm Tools changer 38 fach/tools handwheel HR- 410 total power requirement 41 kVA weight of the machine ca. 10,5 t EQUIPMENT: MACHINE WILL COME EQUIPED WITH COMPLETE WORKING PLACE , WITH ALL COMPLETE TOOLS AND ACCESSORIESS. COMPLETE TOOLINGS COMPLETE CUTTING TOOLS COM ...

This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information.

Horizontal transfer machine manufactured in 2012. This PFIFFNER HW 25-12 features a 12-station indexing rotary table and can accommodate up to 18 machining units. With a maximum clamping diameter of Ø 25 mm and a workpiece length of 100 mm, it offers versatile capabilities. Consider the opportunity to buy this PFIFFNER HW 25-12 machine. Contact us for further details.

This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information.

This 5-axis DMG ULTRASONIC 10/ DENTAL 10 was manufactured in 2010, featuring a universal machining center with X/Y/Z travels of 120/120/200 mm. It includes a rotating CNC table, work spindle with HSK-E 32 attachment, and a maximum rotation speed of 40,000 rpm. The machine also boasts an automatic tool changer with 16 stations and Siemens 840D control system. If you are looking to get high-quality milling capabilities, consider the DMG ULTRASONIC 10/ DENTAL 10 machine we have for sale. Contact us for more information.

This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us.

This 5-axis HABRAMA PPSM 2200 was manufactured in 2009. It features a robust workbench of 390 x 3750 mm, supporting a maximum table load of 4000 kg. The grinding head offers a drive power of 45 kW and a spindle speed of up to 4000 rpm. With a total power consumption of 100 kVA and a weight of 20,000 kg, this machine ensures precision and efficiency for complex grinding tasks. Contact us for more information about this machine.

Tool Milling Machine Deckel FP2E -Extremely smooth running + fully functional -Automatic feeds + rapid traverse in X + Z axis -Machine with sliding head means larger Y-travel -Travel X/Y/Z 400x200x400mm -Speed range 40-2000 rpm -Tool holder ISO 40 -Vertical horizontal milling device -Vertical head swivel with drilling quill -Angle table -Various tool holders -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg

Tool milling machines DECKEL FP1 -Travel X/X/Z 245-150-340mm -Without vertical head / machine was only used for horizontal milling work -Speed range 95-1900 rpm -Built-in rotary table - Automatic feeds X & Y axis -Various collets -Documentation Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight 650Kg

Tool milling machine MAHO MH 800 -Travel X/Y/Z 700-350-450mm -Table surface 940x510mm -Spindle holder SK 40 -Spindle speeds 32-1600 rpm -Automatic longitudinal/transverse feeds -Automatic feed / vertical milling head -Coolant device -Various tool holders -More technical data / See photos Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight: 3500Kg Errors / input errors excepted Hjbkn Ausvbrf Ae S Tsl

Tool milling machine DECKEL FP1 with 3 axis active digital display TNC 113 from educational institution -Travel X/Y/Z 300x160x340mm -Speed range 40-2000 rpm -Feed infinitely variable in three axes Hobkn Asv Abp Tju S Tjl -Rapid traverse in all three axes -Vertical milling head - 100mm movable -Vertical - Horizontal milling device -Drive power 1.5/1.9KW -Rigid angle table -3 axis digital display Heidenhain TNC113 -Coolant device -Work light -Documentation Dimensions: LxWxH 1.3x1.2x1.6 meters / Weight 850Kg

2 x die-sinking EDM machines Maho Hansen HS 350 E and HS 300E built in 1990

Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested