compressor up to used for sale

BIG backhoe bucket 55cm

Replacement tooth small suitable for Hammer RH25 Demolition Pulverizer

Replacement tooth suitable for Hammer RH25 demolition pulverizer

Pallet fork 120cm, - with Manitou pick-up, - 3.5 tons

DECKEL FP 2 Tool Milling Machine Machine Details: Manufacturer: Lid Type: FP 2 Year of construction: approx. 1978 Condition: very good, technically tested and partially overhauled Availability: available on order The Deckel FP 2 is considered the reference among universal milling machines – robust, precise and reliable. Specifications: Travel: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds: 8–400 mm/min Rapid traverses: approx. 1.5 m/min Digital display: 3-axis SINO Dimensions (LxWxH): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Equipment & Accessories: Vertical & horizontal milling equipment Drill quill 3-axis digital display SINO Coolant Setup Work light C ...

A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible.

MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Machine for the inspection of vials, ampoules and other components for particulate particles. Optimized for small workstations, laboratories or production lines, suitable for integration in GMP-controlled environment. Stainless steel construction. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS Enclosed hood with viewing window and adjustable lighting system Controls on front panel: power switch, lighting selector, intensity dial Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION Voltage: 115 V AC (standard US mains); Current: 5 A; Frequency: 60 Hz; Phase: single phase  ...

An electrically operated lifting and transport trolley Serapid with rigid push chain is available. Loading position min./max.: 520mm/2820mm, max. trolley load: 10000kg, max. lifting speed under load: 50mm/s, chain stroke: 2240mm, chain travel speed: 57mm/s, pushing force: 30kN, chain type: 60S, trolley speed: 2.7km/h, ground clearance: 30mm. Machine dimensions X/Y/Z: approx. 3450mm/1700mm/2100mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels

The machine is in good technical condition, testing is possible after prior agreement. Machine on - 92331 h

A bench grinding machine is available. Grinding wheel dimensions X/Y/Z: 125mm/20mm/20mm, speed: 3420rpm, travel X/Y/Z: 130mm/80mm/65mm, clamping angle range: -10°/25°. Machine dimensions X/Y/Z: approx. 400mm/510mm/360mm, weight: 75kg. Including accessories, three grinding wheels and transport box. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible.

Hoshizaki HNC-120AE-L Sushi Display Case 120 cm Product Description The beautifully designed display cases keep the temperature and humidity at a constant level, unlike air circulation systems that dry out the sushi on display. As a result, the sushi stays fresh longer and the quality is visible at the highest level. The Hoshizaki display cases do not thaw so that no condensation drips onto the sushi on display. This always prevents contamination of the products. The included display grilles can be turned upside down to increase cooling performance. Manufacturer: Hoshizaki Model No.: HNC-120AE-L Sushi display case Width: 1200 mm Height: 280 mm Voltage: 220-240 Watts: 150 RRP 2900,-€ You can find more chest freezers in other sizes - new and used - in our shop! International shipping costs on request!

A sharpening machine / regrinding machine is offered. Viewing possible by arrangement.

length: 560 mm width: 700 mm height: 720 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 560 mm width: 730 mm height: 760 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 720 mm width: 730 mm height: 1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Tool trolley, 400kg load capacity - used - : Price per piece: 550.-€ (net) Manufacturer: unknown, probably Fetra Type: unknown Year of manufacture: unknown Payload: 400kg 2 fixed castors, 2 swivel castors, Wooden top with 3-sided edge 4 drawers, 1 cabinet door Width of wooden panel: approx. 1.20m Depth: approx. 69cm Height incl. wooden plate: 93cm Length with handle: approx. 1.30m Width steel structure: 1.04m Width door: approx. 46cm Height door: approx. 56cm Drawer width: approx. 43cm Depth of drawers: approx. 55cm Condition: good Available: immediately Location: Frankenberg camp / Saxony

A cassette set of bending tools for FASTI MAK

Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible.

Router R8, large table, ready for demonstration from the site.

Amut Vertical centrifugal dryer under efurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content, Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon can be quoted on request, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h with film ,more with rigid plastics, depending on material and water %, conditions: refurbished, type: Vertical

Key data: 600 mm, 400 mm, 350 mm

For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...

Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

CONTROLS   PLC Press tool size Total weight max. 9,000 kg Weight of upper part of tool max. 4,500 kg Dimensions max width x depth 3,000 mm x 1,800 mmTool height max. 1,300 mm The turning table is as good as new. The pictures are example pictures.The original is grey, otherwise exactly the same.

The machine is in good technical condition, after prior agreement it is possible to test it. , connected = can be demonstrated in operation. Machine system completely backed up on ext. HDD. Disconnection, reconnection and possibly future service agreed with EDM (exclusive importer and seller)

Axles X 160 to infinity  Y to max 1300 mm Z up to max 60 mm 6-fold tool changer

: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling coil in good condition Dismantling by specialist varnish Availability: immediately Disassembly: included Loading: included Serial No.: 841151 Price: 215.000,00 Vb Spiral height: 5845 mm Inner diameter: approx. 850 mm Outer diameter: approx. 1050 mm Max. product height: approx. 120 mm Belt width: approx. 870 mm Number of spirals: 2 Belt length per spiral: approx. 600 mtr

8x NEW TONERS FOR CANON THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES ARE AVAILABLE FOR PURCHASE: 2x Canon imagePRESS Toner T01 Yellow 2x Canon imagePRESS Toner T01 Magenta 2x Canon imagePRESS Toner T01 Cyan 2x Canon imagePRESS Toner T01 Black

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Elopaks E-PS120UC is a carton packaging solution commonly used for beverages. Here are some key features and benefits:, - Sustainable Packaging: Elopak focuses on sustainability, and their products often feature renewable resources and recyclability., - Functionality: The E-PS120UC is designed for easy pouring, which is essential for consumer convenience., - Preservation of Quality: This type of packaging helps to extend the shelf life of beverages, ensuring that the taste and quality are maintained., - Versatility: It can be used for a wide range of products, including juices, milk, and other liquid foods., - Customization Options: Elopak typically offers branding and design options for their cartons, allowing businesses to create a unique product presentation., Elopak® E-PS120UC, Please also check the pictures there is one of the red label which also states the machine serial number,, ...

Milling printer machine TECNOMAX mod. ROUTER F - Year 2006

High speed vertical milling machine CAMAM mod. FV/1T-1P - Volt. 380/50 - CE rules - Year 1998

Top and bottom wide belt sander SAC mod. 4R 300 - CE rules - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

This ASYS Divisio 5100 is an automatic depaneling system manufactured in 2023. Contact us for more information.

This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information.

This DEPO HF milling machine was made in the year 2012 and has 7 axis. The Stable 7-axis machine is specially developed for the manufacture of tools, molds and matrices.

This HOFMANN CVK11-BH4 was manufactured in 2019. It is an balancing machine designed for precise and reliable operations. Ideal for applications requiring precise balancing of rotating components. Contact us for more information about this machine.

This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information.

This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information.

This M-PULSE 2k6e was manufactured in 2020. It features a modular controlling system, high-quality European components, and is designed for optimal integration into production lines or as a standalone solution. Safety is prioritized with triple redundant voltage measurement and internal safety discharge mechanisms. Energy capacity is 6060 Ws with a maximum voltage of 2000V. Contact us for more information about this machine.

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor N181, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine.