137,193 used machines on RESALE, but how to find them? Machine Search
Fine impact mill B 315 with 15 kW motor, newly mounted
Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units
Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Universal dishwasher: 120 sec 240 sec 280 sec Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Main material: Stainlees Steel
Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler
Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler
Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed
used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2022 specifications: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 30 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 1.7 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 2.5 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 9.5 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Machine has slight fire damage and will be completely repaired if the order is placed.
- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR
Packaging machine Paper machine, Upmatic 4000 PA for pack sizes from 1.5 kg to 10 kg Dimensions of the paper bags 600 x 300 x 180 mm to 600 x 300 x 180 mm Capacity for quantities of 5 kg: approx. 20 bags/min. 230 V / 400 V at 50 Hz Power consumption approx. 3 kW Air pressure 3 bar Air consumption approx. 390 l/min. Weight 700 kg Dimensions 2785 x 1890 x 2200 mm Controls Moeller PS4-341 Control panel MV4-150-TA1 Magazine capacity: 300 paper bags Documentation available Upmatic Computer Scale 2007 Computerized Partial Batch Weighing Machine Weighing range 1.0 to 25 kg Power capacity for quantities of 2.5 kg approx. 30 cycles/min. 230 V / 400 V at 50 Hz. 3 phases + neutral conductor Power consumption approx. 4 kW Air pressure 6 bar Air consumption approx. 2.6 litres/cycle Weight approx. 1100 kg Dimensions 2425 x 1777 x 2053 mm Control, control panel Moeller MI D ...
Alfa Laval LKH-UP70 Centrifugal pump Serial: 298034 2023, Stainless centrifugal pump, 22Kw motor, 3Ph
UNOTECH package press from 2018 with approx. 13 - 14,000 Bh. and a sufficient package of wearing parts. the baling press is designed for baling of metal cans and metal blanks Find more here - .ucymachines/
I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - .ucymachines/ Contact us at - sales@ucymachines
UHLMANN BLISTER LINE Ideal for pharmaceutical production in cleanrooms, fully automated and modular, easy to integrate into existing production lines. Comes from a GMP-compliant cleanroom environment, regularly maintained, comes with complete technical documentation and has been decommissioned for internal production. Consisting of: 1) UHLMANN BLISTER PACKER, MODEL UPS 4 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 15-50 cycles/min - Forming width: 62 - 226 mm (min - max) - Blister format: min. 60 mm; max. 140×39 mm - Depth: pvc 12 mm; alu 10 mm DIMENSIONS - Weight: 4.950 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 30 A 2) UHLMANN CARTONING MACHINE, MODEL C2206 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. output: 200 cartons/min. - Closures: tuck-in, hot-melt - Products: ...
KASTOwa C7 + Brio EB702 + Motoman YR-UP130 Upgrade your manufacturing capabilities with this comprehensive industrial automation package featuring the KASTOwa C7 bandsaw, Brio EB702 , and Motoman YR-UP130 industrial robot. This powerful combination is designed to enhance efficiency, precision, and productivity in your operations. Two complete sawing systems, consisting of bundle loader, saw body, buffer magazine, end processing, measuring table (length measurement, concentricity measurement, wall thickness measurement for pipes and marking unit, as well as a robot for loading containers onto the roller conveyor also included (see concept) A sawing system consisting of bundle loader and saw body including parts chute A chip conveyor from Mayfran Motoman Robot Details: Payload: 130 kg Mass: 700 kg KASTOwa C7 Machine Details: Weight: 980 kg Voltage: 400 V, 50 Hz, 3 Ph Power: 11 ...
automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3 Operating hours: approx. 5,400 hours Year of Make: 2021 Technical data: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 45,000 kg Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and installed in the oil tank. O ...
automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 H5 / RB Operating hours: approx. 2,800 hours Year of Make: 2017 Machine No.: U24170 Technical data: Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Specific pressing force: 124 N/cm² Main pump drive 1 x 55 kW Power Steering Pump: 1 x 11 kW Pump capacity: 410 Ltr./min. Oil tank capacity: 1,300 ltr Volume output under operating conditions: max. 280 m³/h Weight performance depending on the bulk density at 20 to 30 kg/m³ approx. 8.4 t/h for 30 to 50 kg/m³ approx. 13.0 t/h at 60 kg/m³ approx. 16.0 t/h at 100 kg/m³ approx. 23.0 t/h Binding: 5-fold horizontal for plastic cable Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 1,100 x 1,100 mm Bale weight depending on length and material 800 - 1,000 kg Press bottom planked wi ...
Uhlmann UPS3ET/C130 blister packing & cartoning line for ampoules, etc. comprising UPS3ET blister machine with ampoule feeder, blister size max. 220 x 196 mm (in web travel direction x across web), index length max. 222 mm, forming depth max. 28 mm, reel diameter forming foil 400 mm (on machine) and 700 mm (on unwinding stand), reel diameter lid foil max. 300 mm, thickness of forming foil 0,1 bis 0,5 mm, web width forming foil 115 to 244 mm, web width lid foil 105 to 244 mm, reel core diameter 70/76 mm, Siemens SIMAT S7 PLC, electrics 400V/50Hz, connected load 19kW, compressed air 6-8 bar, machine net weight approx. 4800 kg, capacity 15 to 40 cycles/min., transfer of the blister in-line directly into Uhlmann C-130 horizontal cartoning machine for blisters with blister fedeer suitable for blisters containing ampoules, etc., format range carton min. 30 x 15 x 70 mm, max. 100 x 85 x 150 mm, ...
We sell 75 x Schneider SMT3000RMI2UC APC Smart UPS 3000VA LCD RM 2U 230V with SmartConnect Over 1.5 KVA These are brand-new with full warranty. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to com ...
automatic baler Manufacturer: UNOTECH Type: UPAMAT 100 V 5 Factory overhauled by the manufacturer in 2024 Technical data: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal Gear Pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: with a bulk density of 30 kg/m³ approx. 10.0 t/h with a bulk density of 50 kg/m³ approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central l ...
used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2020 Machine was only in operation for about 6 months and was removed from the plant in 2022. Technical data: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 45 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 2.5 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 4.2 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 10.3 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Photos will be added at short notice.
Two identical Yaskawa robots are available for the welding process. Payload: 6kg, reach: approx. 1350mm, axes: 6, repeat accuracy: +/-0.08mm, weight: approx. 130kg. An on-site inspection is possible.
6 Axis Robot Servo Controller,Drive, Motion Control, Servo Pack, Servo UnitServo Unit for YASNAC XRC UP6YASKAWA / MOTOMAN Type CACR-UP6AACO/N RA8616-0Y4A-46S/N: D000Z2676590046Version: 6 Axis Module for Robot- Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6- Interface USB Power Supply Type JUSP-RCP01AACAnmity W x H x D: 270 x 310 x 200 mmWeight: 8.5 kgUsed, very good condition; used
grinding length: 7080 mm grinding width: 500 mm workpiece height: 330 mm Control: Siemens SIMATIC S7 OP17 Passage height: 330 mm grinding spindle data: : grinding wheel diameter: 450 mm grinding wheel width: 100 grinding spindle speed: 6 - 2.100 1/min : 30 kW Feeds: : Longitudinal travel (X-Axis): max. 30 m/min Cross travel (Y-Axis): max. 3 m/min total power requirement: 30 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 8,0 x 2,0 x 3,2 m Equipment and accessories • Basic machine GÖCKEL U9/500 PL, mechanically and electrically refurbished • Siemens S7 control system and OP17 operating screen • Stand-alone electrical cabinet • Integrated handwheel function on the operating screen • Belt filter system with tank capacity approx. 900 l • 1 grinding wheel flange with grinding spindle • 1 pc. Vertical dresser, mounted on machine bed • Documentation ...
Siemens SITOP UPS1600 Power Supply Item number: 6EP4137-3AB00-2AY0 Type: SITOP UPS1600 Input: DC 24V/43.4A Output: DC 24V/40A Battery connection: DC 24 V / 3 A Weight: approx. 2.5 kg Condition: used Price without VAT per piece Country of origin: Austria Piece1
Zeiss UPMC 850 Carat measuring machine for sale • Travels: X = 750mm; Y = 850mm; Z = 600mm • Portal design • Pushbutton magazine with 8 slots • Measuring ball • Probe set • HP working station with monitor
minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783
Off-road work platform Scissor lift with automatic tilt compensation UPRIGHT Type: SL26SL Year of Make: 2008 Load capacity 680 kg Platform dimensions approx. 3.66 x 1.72 m Platform extension approx. 80 cm Transport dimensions approx. 3.79 x 2.13 x 2.6 m (height railing folded down: approx. 1.9m) Weight approx. 3150 kg Working height approx. 9.93 m Platform height approx. 7.93 m Self-leveling tilt compensation The machine works, but has not yet been further technically and visually refurbished. Therefore, here is the special price in advance in the actual condition. Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee ...
Intermittent-motion blister machine with plate sealing and manual product feeding, incl. filling station for liquids. The machine can process ALU/PVC. Output: 15–50 cycles/min at 12 mm forming depth 15–40 cycles/min at 28 mm forming depth
Dimensions (L/W/H): 3450x1550x2950 mm Weight: 4500 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vial blister machine Manufacturer: Uhlmann Model No.: UPS4 Serial Number: 460 Bottles Carton Packaging 2 bottle feeders PACCONTROL PCL Production Capacity: • 15 to 50 cycles/min up to a punching depth of 12 mm • 15 to 40 cycles/min up to a punching depth of 28 mm Maximum feed length: 222 mm Format range: longitudinal 220mm x transverse 284mm Actual format: • Tray for 10ml ampoule (Ø17.5×87) and 10ml vial (Ø15×50), tray dimensions (LxWxH): 99x54x26 • Tray for five 10ml vials (Ø24×50), tray dimensions (LxWxH): 146x66x26 • Tray for a 10ml vial (Ø24×50), tray dimensions (LxWxH): 99x54x26 Thermoforming film diameter: • On the machine : 400mm • On bobbin holder : 800mm Coil diameter of the lidding film: max. 300 mm Min/Max Thermoforming Film Thickness: 0.15/0.5mm Width of the sheath material: • Thermoforming film: 145 to 300 mm • Cover fil ...
Dimensions (L/W/H): 4450x1550x2950 mm Weight: 4800 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2950x1550x2950 mm Weight: 4000 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter:500 mm tool adaptor:50 Weight:12 kg face movement each head:82 mm feeds:0,06 mm/U
This WoodVER UPK-1 was manufactured in 2022. It features a maximum log diameter of 1000 mm and lengths from 2.0 to 6.5 m. The saw has a 550 mm diameter and operates at speeds up to 3000 rpm, powered by dual 18.5 kW motors. It includes an automatic feed, CNC remote control, and hydraulic log handling, enhancing productivity and precision. Contact us for more information about this machine.
General SKU364X863 MakeHosokawa Alpine Type500 UPZ No.P1 187094 Year of construction2011 Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hopper(for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Fine Impact Mills MaterialStainless steel 1.4541 (321) General Mounted on framecheck LocationBarneveld With switch(as is) With control cabinet(as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpmFor the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek – Rotating valve — SKU: 364X914C ...
General SKU335W849 MakeHoesch E. + Soehne Type40.1206 SVM F450 LocationBarneveld Dimensions Cake capacity3050 Pressure Working pressure6 Bar Main Features MaterialPolypropylene Pressure6 Bar Surface191 m2 Specified Features - Filterpress Filter presscheck Filter surface191 m²( constructed surface) Recessed chamber platescheck Number of platens136 Internal platen sizes1100x1100 mm External platen sizes1200x1200 mm Platen thicknessmultiple sizes Frame thickness22 mm With membranes on platenscheck Cake capacity3050 l With outlets on platenscheck Hydraulic closing180 bar With hydraulic unitcheck Automatic openingplate shifting system MaterialMild steel, Polypropylene, Stainless steel 1.4571 (316Ti) General No.2736 / MFP-F450 Year of construction1969 Floorspace8,4x1,78 m Total height1,70 m Weight13000kg ATEX designedcheck Extra Specificationsconstructed a ...
General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill Grinder:plate beater: Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Fine Impact Mills MaterialStainless steel General Year of construction1995 Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberFine Impact MillsMinerals & inorganicHosokawa AlpineIndu ...
Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -DSB: Type UCP 211 bearing block -for: 55 mm shaft -Price: per piece -Number: 13 pieces -Dimensions: 220/60/H125 mm -Weight: 3.4 kg/piece
Used grinding mill from UPMACH Superfine Crusher type SFG 300, year of manufacture 2023. The machine is in working order, not used much. Fine mill with grinding head cooling system (chiller). It has a manual adjustment of the degree of fineness. Spare disc included.
Used Upmach Crusher SFG 300 grinding mill. New 2023. Fine grinding mill with a grinding head cooling system (chiller). Features manual adjustment of the grinding fineness. Includes a spare friction disc.
A Uhlmann blister packaging line in need of repair is available. 1) Uhlmann UPS 4 ETX blister machine, year of manufacture: 2008, design: modular balcony design, modules: 12, blister capacity: 10 tablets, blister format X/Y/Z: 100mm/39mm/5.7mm, packaging output: 220blisters/min, roll width forming/sealing: 256mm/246mm, feed: 102mm, max. forming film roll diameter: 800mm, max. lidding film roll diameter: 300mm, filling section length: 1360mm, theoretical output: 50cycles/min, film width range: 63mm-300mm, punching width range: 28mm-284mm, max. forming depth: 12mm, min. blister dimensions X/Y/Z: 30mm/3.5mm/60mm, max. blister dimensions X/Y/Z: 110mm/12mm/145mm, max. stack height: 85mm, max. blisters per stack: 10, weight: approx. 7000kg. 2) Uhlmann C 2155 cartoner, year of manufacture: 2008, cartoning output: 10-150cartons/min, max. stacking output: 400blisters/min, product carrier height: ...
maximum number of results exceeded
please refine your search
