134,071 used machines on RESALE, but how to find them? Machine Search
Key data: 199 , 6 , 40
FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...
Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg
Bar max: 8 m3/h: 211 KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465
Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg
Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27kg
Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg
Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor -Volume flow: 182.7 m³/h -Compressor final pressure: 28 bar -Speed: 1450 rpm -Voltage: 380/415 V 3PH -Current strength: 105/96 A -Frequency: 50 Hz -Weight: 490 kg
Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg
Maximum volume flow: 390 l Capacity approx.: 266 l Maximum pressure: 10 bar Tank: 50 l Cylinder/level: 2/1 Dasr7h9qg Speed: 1,360 min-1 Engine power: 2,2 kW 230 v weight: 57.5 kg Year 2011 Dimensions (Lxwxh) in mm: 870 x 400 x 700 G &-2974-O2386
Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg
We suggest Bitzer compressor. All compressor is working: Bitzer unit with 4G-20,2Y-40P 4pcs - 4000Eur Bitzer compressor 4TCS-12,2Y - 600Eur Bitzer compressor 4CC-6,2Y - 400Eur Bitzer compressor 4P-10,2Y - 350Eur Bitzer compressor 4V-6,2Y - 350Eur Copeland: D4SL1-150X-AWM - 4pcs - 700Eur D3SS1-100X-AWM - 3pcs - 500Eur ZB58KCE - 2pcs - 250Eur. All compressor is working. NEW GeaBock compressor very good price: Compressor HGX 44e/565-4 - 5pcs - 1000eur Compressor HGX 44e/665-4 - 4pcs - 1100eur Compressor HGX34/210-4ML CO2 T - 7pcs. - 1500eur
oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg
Manufacturer: Trane Type: CRHR400 G2HBO Type: Compressor Technical data: Volume flow 145.3 m3/h compressor end pressure 28 bar speed 145 0 1/9p Voltage: 380/415 V 3PH 100/92 A 50 Hz New price EUR 11,043 Condition: new; ready for use
Compressor Worthington in very good condition, incl. dryer Description in the annex!
Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer:BEKO, air compressor oil-water separator -Type: 30/0.8Mpa -Dimensions: Ø 360 x 1220 mm -Weight: 24 kg
Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg
refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor -Power: 5.5 kW -Speed: 1415 rpm Quantity: 1 piece available -Dimensions: 450/500/H560 mm -Weight: 150 kg
M. No.: C0851000161 Equipment / Additional information: Ultimate pressure: 150 hPa(mbar)
refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor -Power: 5.5 kW -Speed: 1415 rpm -Dimensions: 450/500/H440 mm -Weight: 80 kg
Flushing compressor, flushing connections -Flushing connections: 15 -Controls: 11 -Packaged: in a wire mesh box -Sale: only complete set -Weight: 312 kg
Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg
Compressor control, compressor control, base load switching circuit -Compressor control: for circuits with multiple compressors -Handover in its current condition as inspected -Dimensions: 220/320/H140 mm -Weight: 4 kg
Compressor, compressor screw RefComp NEW,Type: SW1L17000, 127KW Electric, 510m3/h
Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg
Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm Isbmrc Iporp D Uxenjtf width: 1600mm height: 2000mm weight: 4400 kg
Compressor Bitzer CSH8571-140Y-40P
We sell 2x Knorr-Bremse compressors here. The following data: Suitable for RVI MIDLUM PREMIUM Manufacturer Part Number: KNORR LK4944 | K017527X00 Compressor-Air, Capacity 720cm³, Number of Cylinders: 2, Cooling: Liquid, Price is unit price. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response te ...
Various compressors are offered, including those from the company Bock, used. The equipment is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The offers are subject to change, subject to error and subject to a possible intermediate sale. Our terms and conditions also apply to every sale, to which we expressly refer
Rotary vane compressor manufacturer: Becker Type: VT4. 25 Voltage: 400V/50 Hz Warranty: 12 months Status: Rebuilt and new painted Pressure capacity: 25 m ³/h Discharge pressure: Max + 1 bar (rel) Accessories: owner's manual; ready for operation
CompAir L90-7.5A rotary screw compressor was built in 2016 in Germany by Gardner Denver Deutschland GmbH. The device is designed to produce compressed air used in many industries as a power source for machines and technological processes. The CompAir L90-7.5A compresses air to the required pressure by means of an advanced compression system based on two rotating screws. This system provides the highest quality compressed air at low rotational speed to help minimise energy consumption and achieve maximum performance of the unit. The integrated oil filter and oil regulation valve reduce the number of external components, simplifying maintenance and reducing operating costs. The innovative design of the fail-safe shaft seal, in turn, increases operational reliability and minimises downtime of the machine. The CompAir L90 screw compressor is operated via a DELCOS XL controller with touchs ...
Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50
Screw Compressor, Kaeser, Aircenter SX 4, Compact All-in-One Solution - Used - : Price from location: 4.500.-€ (net)! Manufacturer: Kaeser Type: Aircenter SX 4 Year of Make: 2013 Rated Power: 3.0kW Engine speed: 2,910 1/min Max. operating overpressure: 8.0 bar Ambient temperature: 3 degrees / 45 degrees Compressed air tank: 200 litres Sound pressure level: 60–61 dB(A) Total weight: approx. 285 kg Dimensions (WxDxH): 590 x 1090 x 1560 mm Options: K1 (refrigeration dryer) / T2 (power supply/transformer) Operating hours: approx. 46,997h (as of 21.4.26) Condition: good Available: from approx. August 2026 Location: Leipzig
2x screw compressors, Kaeser, 10 bar, with integrated refrigerant dryer, compressed air tank, control SIGMA AIR MANAGER 4.0 – used - : Price per compressor ex location: 5.950.-€ (net), dismantled, packed and loaded! Price for the compressed air tank ex location: 1.450.-€ (net), dismantled, packed and loaded! Superior control system SIGMA AIR MANAGER 4.0, price from location: 2.500.-€ (net)! Price for the complete system (2x compressors, 1x compressed air tank, 1x control system SIGMA AIR MANAGER 4.0) = only 13.500.-€ (net)! Manufacturer: Kaeser Type: SK 25 T Year of Make: 2016 Serial No.: 7201 Material No. SK.2 Operating hours: unknown, will be submitted later Rated power: 15.0 kW Engine speed: 2,960 rpm Max. operating overpressure: 11.0 bar Dimensions (according to manufacturer's data sheet) W x D x H (mm) 750 x 1240 x 1260 Option K1 T2 C3 Option ...
Offer 26166 - Screw compressor Make: KAESER Type: SK 22 Engine number: 1464 Year of manufacture: 2015 - Control SIGMA Kontrol - Operating hours approx. 15933 h - Load hours approx. 7654 h - Operating pressure 11 bar - Delivery rate 1.67 m³/min - Drive 400 V / 11 kW - Space requirement approx. W 780 x H 1030 x D 850 mm - Weight approx. 300 kg - Compressed air boiler Make: OKS Type: 500L Engine No: 462811 Year of manufacture: 1998 - Boiler capacity 500 L - Compressed air dryer Make: JÄGER Type: ERD 150 Engine No: 1268 Year of Make: 2011 - Refrigerant R134 A - Cooling air volume 150 m³/h - Oil - water separator
A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement.
Two DWM Copeland refrigeration compressors are offered. The condition is used. According to the age, there are signs of wear and rust all around (see pictures). They served as replacement devices for a spiral freezer. VAT can be demonstrated. Technical data: Manufacturer: DWM Copeland Model: D8SJ1-600X-BWM/D Year of Make: 2008 Voltage: 380 V 3 phases Frequency: 50 Hz Current: 107 A Speed: 1450 1/min Volume flow: 180 m³/h See nameplate. Sale only to tradespeople. If you have any questions, please feel free to contact us. The device can be tested on site. You are also welcome to make a fair offer. The refrigeration compressors are sold under exclusion of any liability for material defects. There are no returns, no guarantees, no exchanges and no warranty. All information without guarantee.
Becker rotary vane compressor/pressure pump complete with 18.5 KW AC-motor, 500 m3/h, 1.4 bar, completely overhauled with all wearing parts, 1 year warranty
A screw compressor Atlas Copco with integrated refrigerant dryer is offered. Power: 11kW, motor speed: 7700rpm, operating pressure: 12.75bar, capacity: 32l/s, variable speed controlled, operating hours: 9035h, weight: 271kg. An on-site inspection is possible.
An oil-lubricated, variable-speed Almig screw compressor is offered. Motor power: 22kW, volume flow: 760-3910l/min, max. operating pressure: 13bar, max. motor speed: 6400rpm, operating hours: approx. 24702. Documentation available. Inspection possible by arrangement.
Offered are two identical, belt-driven, sound-insulated Alup screw compressors. Power: 7.5kW, operating pressure: 10bar, capacity: 1m³/min, weight: approx. 215kg. An on-site inspection is possible.
Make: BOCK Type: HGX4/650-4 Max current consumption: 27A Power: 56.6 m3/h Low pressure: 19 Bar High pressure: 28 Bar Price on request Contact details can be found under Contact
Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos -Dimensions: 730/690/H1315 mm -Weight: 291 kg
Make: BOCK Type: HAX4/555-4 Max current consumption: 26A Power: 48.2 m3/h Low pressure: 19 Bar High pressure: 28 Bar Price on request Contact details can be found under Contact
maximum number of results exceeded
please refine your search
800 € 
