complete pet used for sale

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

Auction-ID: A1-45422-26

Auction-ID: A7-45452-28

LINE FOR FILLING EDIBLE OIL IN 1,0 LTR. PET BOTTLES Capacity: 6,000 hph x 1.0 L conisting of: Blower KOSME KSB 3000 – 2001. – 2 pcs x 3,900 fph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. - 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filler and capper – ICS-Slovenia - 1995 – 6,000 L/h Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3x5 bottles – ICS – 1995 Shrink wrapper SMIPACK-packer in foil 2x5 bottles – 2013 Pallet wrapper ZLATOROG-Slovenia – 1999 KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth approx. 30.000.- EUR It has complete technical documentation Required space for eq ...

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Brand: Siepla, Model: Minerva 2.2, power: 56 Kw, year: 2011. It is automatic, easy to use and simple. With horizontal design facilitating access to its different parts and maintenance. It works in continuous cycle from the loading of the preforms to the automatic unloading of the bottles. Infrared sensor that measures the temperature of each preform before entering the mold. Air recovery system being two different pressures of compressed air. It converts some of the 35bar air into 10bar air that can be used by the machine itself.

Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

Used pet food production and packaging line made by Waldner. New 1995.

for the production of 27,000 bottles per hour. With shape

for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould

LANFRANCHI PET Bottles unscrambler capacity adjustable up to 27.000 bph Type L3 SR21 in top condition Was processing 0.50L and 1.25L PET bottles including : - full exit device to air conveyor system - electrical panel and drive Siemens S7 - already dismantled and packed Equipment in top condition Can be loaded & dispatched immediately

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Key data: 5000 kN, 3845 g/PS, 120 mm

Husky SX500 running 96 cavities molds not in production since Feb 2024 120mm screw 3845cm3 shotweight manufactured June 1995 between bars 920x920mm

Magazine tubes for PET strapping Format: 16x33x0.6 mm 2500 Pieces / Box 6 boxes in stock

description: For Ref PET/ PET cycle High performance is possible, ejecting bottles from overhead crates. The bottles are then collected in a container. Ready for squeezer. Price on request Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We a ...

Peugeot Citroen PSA HM01 1.5 VTI engine parts. Parts taken from one petrol engine with ca. 50.000 km. Parts are: motor head, main block, pistons, main shaft, oil pan, oil pump and all bolts.

KHS Aseptic PET filling line - approx. 15,000 bph based on 0.5 ltr. PET bottles Filling product: Juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system Year of manufacturing: 2009 consisting of: SIG Blowing Machine Preform feeding System Air conveyor system KHS Aseptic filler and capper Cap sterilization and feeding Unit Bottle conveyor cystem Plate UHT sterilizer Shrink wrap packaging machine Not included in the line is the blending and CIP units. The line is still installed and can be inspected in full operation until 1st of May 2025.

Krones Air Conveyor diverter from 1 to 2 for PET air transport

Key data: 132 , 40 , 750

Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours

Key data: 90 , 40 , 510

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation

Injection moulding machine for PET preforms

Injection moulding machine for PET preforms

Cup printing machines

Container Size (Max.): 2,5 l

Injection stretch blow moulding machines for PET bottles

Output (Packs Per M?Inute): 45 U/min // Type : Barrel

A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.

AVE UNIBLOCK 16/16/4 Bottle fillers. However, I can suggest common features found in similar bottle filling machines, which may include:, - Filling Type: Gravity, Pump, or Gravity/Pump combination., - Production Rate: Typically measured in bottles per hour or minute., - Number of Filling Heads: In this case, it could refer to a 16-head system, meaning it can fill 16 bottles simultaneously., - Bottle Size Range: Specifications may include the range of bottle sizes the machine can handle., - Control System: May involve PLC (Programmable Logic Controller) for operations., - Material Construction: Stainless steel or food-grade materials suitable for hygienic applications., - Dimensions and Weight: Overall dimensions and weight for installation considerations., - Power Requirements: Voltage and power consumption details., Bottle Sizes: 250 ml, 500 ml, 1 Litre , 2 Litre , Cap Size: 38 mm, Capa ...

Used Used Husky preform press: Year: 1989 Condition: Good USED HUSKY PREFORM PRESS Year: 1989 Model: XL225PET Press to 32 cavities Stamp: 31,8 Gr (made by husky in 2010) Safety protections Code: W 95 More details: https://bottlingscout.com

Complete Glass Bottling Line for Hot Fill & Cold Fill (Krones / KHS) - Capacity: up to 33,000 bottles/hour (500 ml glass bottles) - YOM: 1999-2007 - many upgrades, see below! The system offers maximum flexibility, allowing hot fill, cold fill, still and carbonated beverages, and multiple bottle sizes. Important: The filler can also be used for PET bottles, offering additional production flexibility. Key Technical Data - Bottle Types - Glass bottles (non-returnable) - PET bottles can also be filled Bottle Sizes - 250 ml – 1000 ml Products - Fruit juices (orange, apple, tomato, etc.) - Hot fill beverages - Cold fill beverages - Carbonated soft drinks (CSD) Capping Types - 28 mm aluminium cap - 33 mm aluminium twist-off cap - 43 mm aluminium twist-off cap - (Twist-off capping machine included) Labelling Options - Paper labels with cold glue - Optional ...

Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, So.Te.Ma.Pack, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling mac ...

Manufacturer: Weightpack S.r.l., Goito (MN), Italy Model: WSFC 32/24/6 – 141 NH ESL Serial number: WL 0289 Year of manufacture: 2010 Type: Rotary filling line for high-hygiene dairy products Version: ESL – Extended Shelf Life 32 sterilization stations 24 filling stations Capacity: Sterilisation of containers using H₂O₂ Precise volumetric or gravimetric filling technology Max. 12,000 l/h for 1-litre format (see photo above) -> in practice, we produced at 7,000 l/h

Used line for packaging tablets and capsules in PET packaging Line composition: 1. DT PACKAGING SYSTEM UNSCRAMBLER1000S rotary sorter 2. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 3. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 4. B8P/3DUPLEX counter 5. B8P/3DUPLEX counter 6. Elevator 7. ML657 cap setter 8. Desiccant hopper 9. Cap hopper 10. PACK SERVICE PREALIMENTATORE lid elevator 11. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 12. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 13. Neri labeler SL200 14. Marchesini MA155 cartoning machine 15. Type C Transporter

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-44803-362

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-44803-363

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-44802-363

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-44802-362

Petrol lawn mower MURRAY approx. 47cm cutting width, grass collector, older

Kitchenette Kitchenette petrol-grey, approx. 200x60x82cm (WxDxH) worktop white, dishwasher Siemens SN55M508EU, possibly out of service

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...