complete line used for sale

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-207

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-206

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-204

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-210

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-203

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-209

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-208

Lot consisting of 1x electric sit-stand desk with cable entry, wire duct and desk drawer. Dim. approx. height 61-126 cm. WxD 140x80 cm. ----- 1x Senator ergonomic office chair with 4D adjustable armrests, seat height and seat depth adjustable, tilt mechanism backrest/ active sitting, lumbar support and netweave back upholstery ----- 1x extendable storage cabinet. Dim. approx. hxbxd 110x44x81 cm. Auction-ID: A1-44654-205

Brewing plant with a mash-out wort volume of 20 hl, comprising the following components: 1. Malting plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, malt conveyor and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels with copper lids, spindle station and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Pressure tank cellar with 2 x pressure tanks (Speidel, 2021, 86 hl, 3 bar) and 1 x pressure tank (INOX, 2018, 67 hl, 3 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17–20 kegs/h) 6. Refrigeration system acting as an ...

Used Kosme Filling Monoblock Completely Refurbished in 2016 Introduction to the Kosme Monoblock The Kosme filler, a filling monoblock with a 24/24/6 configuration for carbonated and still water, stands out for its reliability and high-performance capabilities. Additionally, this machine, refurbished completely in 2016 and unused since then, ensures optimal working condition. Performance and Operational Capacity of the Used filling monoblock Kosme completely refurbished in 2016 This monoblock’s operational capacity is remarkable; it produces 9000 pieces per hour for 330 ml bottles, demonstrating its versatility in handling various bottle sizes, ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height. Technical Features of the Monoblock Among its key features, the presence of an aluminum cap and an effective rinsing system are noteworthy. Furthermore, the monoblo ...

Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,30 ...

Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization le ...

Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized ...

General: • Extensive stainless steel catering and food processing set • Consisting of several professional devices and containers • Sale as a complete item • Robust, durable stainless steel design Components of the set: 1. Gas stove (MBM) Manufacturer: MBM (Italy) • Model: C6FV70 • Power: 33.1 kW • Multi-burner gas stove with oven • Stainless steel design 2. Industrial scales (Bizerba ITL) • Manufacturer: Bizerba • Model: ITL • Maximum load capacity: 60 kg (according to the nameplate) • Electrical connection: 230 V • Mobile version with frame 3. Stainless Steel Centrifuge/Fruit Processing (Shag) • Manufacturer: Zottel • With perforated basket (spin cycle) • Year of manufacture: 2011 4. Stainless steel tanks (mobile) • 2x tanks available • Capacity: approx. 200 litres each • Design: stainl ...

Dimensions: 7.6x10x3.76m (wxlxh); Floor area: 76.6 m2 (Approx.); Sidewall height 2.44m; Top Height: 3.85 m; Eave height: 2.44m; Doorway: 2.5x2.25 (wxh), no front door, just open.; Side door: B0.91H1.98m vertical grain 2 layers split; Steel frame: 15 GA (1.8mm); Metal deck sheet: 0.32-0.38mm; Anchoring: expansion bolts; Foundation required: Concrete boards, solid wood or similar; Note color black Ral 9005!; Unused Auction-ID: A1-40104-147

Features: HEY Extraction system type SAU 300 1000x3200x2900 VERBOOM Planer type VE-400 2510x1200x1100 SCM Thickened bench type S52 1800x1000x1100 SCM Table saw type S116F including connecting custom-made workbench 1820x3750x1550 VERBOOM Miter saw type Radial600P3S including custom-made metal guide 1260x4500x1450 SCM milling cutter type T120/C 1050x950x1640 CORAL Extraction 1400x600x2200 CENTAURO Bandsaw type SP60 440x1100x2060 SAMCO Long hole drill type AS16 700x900x1200 Including fully functioning extraction with coupling and various separate pipes and power box Needs to be disassembled by the buyer, lifting equipment available. Auction-ID: A1-41992-145

Equipped with 12V solar panel with charge controller Safe IP housing for charge controller and Ajax Hub Detection range is between 3 and 15 meters including 1x Hub BP Jeweller, 1x Baseline StreetSiren white, 4x Baseline MotionCam outdoor (PoHD), 3x Battery 12V 17aH for in the base of the tower, 1x Battery 12V 7aH for the Hub BP, set of internal cabling including connectors and bracket, 1x Ajax SIM card permissions and access to the App for use Auction-ID: A1-40104-75

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

Used pastry machine CANOL, type: CA-L -in bakery condition- - Dough preparation CA-L (built in 2001) - Calibration unit TS/0 (built in 2002) -Longitudinal section -Guillotine - Incl. many cutting tools (cutting rollers) - incl. band C/L (built in 2001) The system was still in use until recently and works without any problems. Visits and test runs are possible by arrangement.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-15

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories: per set: - 2x Powercon connection cables, - 2x link cables Powercon/XLR, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws Auction-ID: A7-45172-11

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-14

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories: per set: - 2x Powercon connection cables, - 2x link cables Powercon/XLR, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws Auction-ID: A7-45172-10

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-13

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-12

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: THK, 4 pieces guide rails with 8 pieces guide carriages/slides -Guide carriage: Type SR -Rail length: 410/340 mm -Rail width: 23 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 410/100/50 mm -Weight: 6.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 20mm long version -Bolt circle: Ø 43x6 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 54 x 80 mm -Weight: 0.2 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 16mm long version -Bolt circle: Ø 35x5 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 46 x 68 mm -Weight: 0.1 kg/piece

Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm Auction-ID: A7-45416-264

Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

DIA. RANGE: 12.7 - 50.8 MM; STRIP WIDTH: 165 MM, THICKNESS: 0.6 - 2.0 MM; COIL WEIGHT: 500 KG, 60 M/MIN., ETC.

Used Conveyors as needed and at your Layout with Motors, Curves, etc.

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

STRIP THICKNESS: 0.5-5 MM, SHHET LENGTH: 2 - 4 M,

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992