CompAir L90-7.5A rotary screw compressor was built in 2016 in Germany by Gardner Denver Deutschland GmbH. The device is designed to produce compressed air used in many industries as a power source for machines and technological processes. The CompAir L90-7.5A compresses air to the required pressure by means of an advanced compression system based on two rotating screws. This system provides the highest quality compressed air at low rotational speed to help minimise energy consumption and achieve maximum performance of the unit. The integrated oil filter and oil regulation valve reduce the number of external components, simplifying maintenance and reducing operating costs. The innovative design of the fail-safe shaft seal, in turn, increases operational reliability and minimises downtime of the machine. The CompAir L90 screw compressor is operated via a DELCOS XL controller with touchs ...
Screw compressor CompAir L55 55 kW 7.5 bar 10.69 m3/min Year of Make: 2012 Hours: 53,348
Screw compressor CompAir Type L07-13 Year of manufacture 2008 CE With compressed air dryer Make Knoll EKO MAK Power 7.5 kW Volume flow 0.69 m³/min. Step pressures 13 bar Suction pressure 1.0 bar Full assist current 15/18 amps Speed 3000 rpm. Voltage 400 Volt / 3 Phase / 50 Hz
Key data: 30 , 16 , 4
Screw compressor Weight: approx. 750Kg Volume flow: 4.88 m³ Suction pressure: 1.0 bar Speed: 3000 1/min Motor power: 30 kW
ID3668 CompAir C200 TS-14 year/Baujahr 2005 825 hours only! 3.5 t Compressor 14 bar, 20 cbm/h, 224 KW Compressor 14 bar, 20 cbm/h, 224 KW
Key data: 75 , 10
Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 p ...
Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.
Compressor COMPAIR L22 SR-10 Volume 2.86 m³/min Properties: Identification number 100016088/0009 Built-in compressor 6115 Order no. 10698941 Compression medium AIR/LUFT Length 800 mm Width 700 mm Total height 1400 mm Weight 355 kg Volume flow 2.86 m³/min Suction pressure 1 bar Step pressures 10 bar g Speed 3600 min ̄¹ Installed motor power 22 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz
Compressor type Champion 135 TS Volume 12.8 m³/min Properties: Identification number 449001/50 Order no. 50352400 Built-in compressor 50 Compression medium AIR Length 2400 mm Width 2400 mm Total height 2100 mm Weight 2480 kg Volume flow 12.8 m³/min Suction pressure 1 bar Step pressures 1.8 / 7 bar g Speed 1000 min ̄¹ Installed motor power 75 kW Motor revolutions 1000 rpm
Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I
Compressor Type Champion 180 TS Properties: Identification number 449001/158 Order no. 10095340 Built-in compressor 158 Compression medium AIR Length 3050 mm Width 2100 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 22 / 12 bar g Speed 1000 min ̄¹ Installed engine power 110 kW
COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...
Compressor CompAir L 75 Operating hours approx. 3100 h was used as a reserve compressor Volume flow 10.25 m³/min Motor power 75 kW Very good ready-to-use condition, directly from production!
Air compressor, make CompAir, type: D75HSR-10W, 75 kW, built-in compressors 2S4 and 2S7, volume flow 11.9 m³/min, 10 bar, intake pressure 1 bar, 3700 rpm, YOC 2009
Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: Compressor with refrigeration dryer and oil separator, Capacity: 8 m³/min, Stage pressure: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz, Length: 1,80 m, Width: 0,92 m, Height: 1,80 m
A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.
Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used
feed pressure: 8 bar total power requirement: 11 kW Year: 1995 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 711- 00 37 48 total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
