127,865 used machines on RESALE, but how to find them? Machine Search
with 2x battery and charging station Auction-ID: A1-45411-73
Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.
2015, machines have been put away working and have had annual inspections
2015, Crack in screen but functional, machines are put away working and have had inspection annually
Manufacturer: MAN Model: TGA 28.320 6x2-4BL Year of Manufacture: 2007 Engine Power: 235 kW (320 HP) Fuel Type: Diesel Engine Capacity: 10,518 cm³ Axle Configuration: 6x2-4 Permissible Total Weight: 27,000 kg Permissible Axle Loads: - Axle 1: 8,000 kg - Axle 2: 8,000 kg - Axle 3: 11,000 kg Unladen Weight: 19,000 kg Gross Vehicle Weight Range: 27,000–26,000 kg Wheelbase: 3,500–3,050 mm Tire Sizes: - Front: 315/80 R22.5 - Rear: 385/65 R22.5 Body Type / Equipment: FAUN Powerpress 524 Special Features: - Müllwagen (Refuse Compactor Truck) - Equipped with FAUN Powerpress body system - Red reflectors on foldable components as per StVZO exemption - Noise class: EG Lärmarmer (low-noise vehicle) Find more here - / Contact us at -
2015, machines have been put away working and have had annual inspections
2015, machines have been put away working and have had annual inspections
SMC GMPM32-TF25Z Compact Cylinder , 2B1 8DE , G WV , Max 1.0 MPa
2015, machines have been put away working and have had annual inspections
1 LAFER tubular knitt compactor type KST500, year 2009, working width 150 cm
2015, machines have been put away working and have had annual inspections
We offer you the following machine. - Manufacturer: Kubota - Type: ST A-35 - Power: 26 kW - Weight: 2030 kg - Year of construction: 2003 - Mileage: approx. 3880 bH - PTO shaft front and rear - Service, oil change New - Accessories: Sliding blade can be purchased separately
Used bread roll line LIPPELT, type: G3000-CSC -In very good bakery condition- For Kaiser and sliced rolls - Head machine SVP - 3 rows - Digital control - Pre-proofer Z-B049 - with side discharge - Stamp shapes, such as HEART stamps, are available separately from the manufacturer -El. Connection: 3x 400 V, 50 Hz, 10 A, 2.2 kW - Capacity: 2,500 - 3,000 pcs./h The system is in a very good and well-maintained used condition and is immediately ready for use. Inspection and test run are possible by arrangement.
AVENTICS MSC-DA-025-0100-HG-HM-HM-02-M-S-0-0-ACC, Compact Slide Mini Slide Item Condition: New Specifications: Damping: hydraulic Compressed air connection: G 1/8 Stroke: 100 mm Piston diameter: 25 mm Ambient temperature max.: 60 °C Min. ambient temperature: 0 °C Principle of action: double-acting Operating pressure max.: 10 bar Min. operating pressure: 1 bar H1R6A13K22 1_HS 6 kg You can find more compact slides - new and used - in our shop! International shipping costs on request!
Semi-Automatic Shrink Packer – Smipack BP600 (2020) This Smipack BP600 is in excellent condition. It is a semi-automatic shrink-wrapping system featuring a pneumatic infeed pusher, a horizontally operated pneumatic sealing bar, and a single-chamber shrink tunnel integrated into a compact monoblock design. The machine is designed for low- to medium-output consumer packaging applications using LDPE shrink film. It is suitable for a wide range of rigid and semi-rigid products, including bottles, cans, jars, carton trays, and various industrial items. The BP600 is intended for grouping and packaging products in LDPE shrink film, with optional use of pads or trays depending on specific operational requirements. Technical Characteristics Manufacturer SMI Italy Manufacturer’s model Smipack BP 600 Manufacturing year 2020 Total operating hours Approx 700 Capacity upto 600 p ...
Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg
Piston Diaphragm Pump Motor power 5.5 kW Flow rate 6 m3/h Delivery pressure 15 bar The pump was only in operation for 3 years to feed a chamber filter press with vegetable oil
Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts
Compact stations with oil transformer 1600KVA, was recently still in operation for wind turbines.
We are selling the following used 12 m3 press containers and skip compactors .All units are suitable for waste compaction including waste incineration, cardboard, Sagex, and film materials. Unit 1: Franz Dreier Press Container without Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: 2019 - Volume: 12 m3 - Tipping device: No - Supply voltage: 380V 3N 50Hz - Condition: Used Unit 2: Franz Dreier Press Container with Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: unkown - Volume: 12 m3 - Tipping device: Yes - Condition: Used Unit 3: Franz Dreier Press Container without Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: 2012 - Volume: 12 m3 - Tipping device: No - Condition: Used Unit 4: Franz Dreier Press Container with Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: 2012 - Volume: 12 m3 - Tipping device: Yes - C ...
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, AS-i compact module -Manufacturer: Siemens, AS-Interface compact module ovp -Type: 3RK1400-1DQ03-OAA3 -Cardboard dimensions: 165/75/H40 mm -Weight: 0.2 kg
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, AS-i compact module -Manufacturer: Siemens, AS-Interface compact module ovp -Type: 3RK1408-OCT01-OCAO -Cardboard dimensions: 175/75/H75 mm -Weight: 0.5 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, short-stroke cylinders, flat cylinders -Manufacturer: Festo, compact cylinder worth type designation -Stroke: 10mm -Piston: Ø 40 mm -Piston rod: Ø 8 mm / M4 x 0.7 -Number: 2x cylinder available -Price per piece -Dimension: 55/28/H34 mm -Weight 0.1 kg/pc.
PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU -Manufacturer: Siemens, compact device CPU 224 Simatic S7-200 / digital I/O EM 223 -Type: 6ES7214-1BD23-0XB0 / 6ES7 223-1BF22-0XA0 -Individual components: see photos -Number: 4x module available -Price: per piece -Dimensions: 170/90/H60 mm -Weight: 0.5 kg/piece
PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU -Manufacturer: Siemens, Simatic S7-200 CPU 222 compact device -Type: 6ES7 216-2AD22-0XB0-Digital output: Spare part type 6ES 221-1BF22-0XA0 2 pieces. -Number: 1x module available -Dimensions: 290/80/H60 mm -Weight: 0.7 kg
rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table -Manufacturer: Sopap, compact rotary table -Type: Ta 160-12-270-2-D -Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12 -Speed: 8 rpm / 12 intervals -Brake: 40 Nm -Individual components: see photos -Dimensions: 700/610/H390 mm -Weight: 212 kg
Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously -Drive power: 2.02 kW -Filling opening: 1190/990/H670 mm -Bale volume: 1 m³ -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-63-80-A-PPS-A -Stroke travel: 80 mm -Piston: Ø 63 mm -Piston rod: Ø 16 mm / M12 -Hole: Ø 12 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 185/75/H100 mm -Weight: 2.1 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-125-25-APA-20K2 -Stroke travel: 25 mm -Piston: Ø 125 mm -Piston rod: Ø 25 mm / M20 -Max. pressure: 10 bar -Number: 7 cylinders available -Price: per piece -Dimensions: 175/135/H210 mm -Weight: 3.5 kg/pc.
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-40-50-APA 156633 -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm / M10 -Number: 2 cylinders available -Price: per piece -Dimensions: 125/60/H63 mm -Weight 0.8 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-80-15-A-PPS-A 572728 -Stroke travel: 15 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 110/95/H125 mm -Weight: 1.4 kg
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-32-50-APA 536275 -Stroke travel: 50 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 120/45/H45 mm -Weight: 0.4 kg/pc.
CNC control unit, power supply, switching power supply, servo module, control unit, Pro module, controller, compact control -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-DX1 / LE4-116-XD1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg
CNC controller, power supply, switching power supply, servo module, control unit, Pro module, controller, compact controller, PLC controller -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-XD1 / LE4-116-DX1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-25-10-APA 536260 -Stroke travel: 10 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 55/40/H40 mm -Weight: 0.2 kg
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADVUL-25-25-PA 156870 -Stroke travel: 25 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 78/40/H40 mm -Weight: 0.3 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-32-20-IPA 536281 -Stroke travel: 20 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Max. pressure: 10 bar -Number: 8 cylinders available -Price: per piece -Dimensions: 70/47/H47 mm -Weight: 0.3 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-20-20-APA 536237 -Stroke travel: 20 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm / M8 -Max. pressure: 10 bar -Number: 63 cylinders available -Price: per piece -Dimensions: 80/36/H36 mm -Weight: 0.2 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-20-25-APA 536238 -Stroke travel: 25 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm / M8 -Max. pressure: 10 bar -Number: 16 cylinders available -Price: per piece -Dimensions: 80/36/H36 mm -Weight: 0.2 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-20-15-A-PPS-A 577167 -Stroke travel: 15 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm / M8 -Max. pressure: 10 bar -Number: 5 cylinders available -Price: per piece -Dimensions: 75/35/H35 mm -Weight: 0.2 kg/pc.
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: WEDA, Pneumatic cylinder compact cylinder with through piston rod -Type: WA-0605-50-P-OFS-DW -Stroke: 30 mm -Piston rod: Ø 16 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 124/52/H75 mm -Weight 0.5 kg/pc.
Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested
SOLIS HST26 Compact tractor / year of construction 2025 / Engine : Mitsubishi 3-cyl S3L2 / 1318cc - 24hp – 310working hours / hydrostatic transmission / 4wd / fuel diesel / tank capacity 30L / Low gear max 8km/h / high gear max 17km/h / servo steering / PTO speed 540 /1000 rpm / rear tire size 8.3x20, 6PR / front tire size 6x12, 6PR / turning radius 2m69cm / weight 1055kg / lifting capacity 600kg / double acting oil valve with 14L/min flow / front loader with closed box / all Documents Auction-ID: A3-43507-11971
maximum number of results exceeded
please refine your search
120 € 
