135,939 used machines on RESALE, but how to find them? Machine Search
round bar steel: 30 mm square edge steel: 25 mm L-beam: 80 x 80 x 8 mm : 200 x 13 / 350 x 6 mm : 40 t throat: 175 mm work stroke: 32 mm work height max.: 980 mm hole diameter in sheet thickness: 20 x 15 / 38 x 8 mm total power requirement: 3,0 kW weight of the machine ca.: 0,62 t Dimensions (LxWxH): 1,0 x 0,8 x 1,3 0 Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible.
Full wrapping machine with container labeller and serialization Full wrapping machine Manufacturer: pester Type: PEWO-fold 2 Compact Year of manufacture: 2018 Container labeller Tamp On Manufacturer: Domino Type: M400Z - T6 - 400 - Right Year of Make: 2017 Serialization Manufacturer: Mettler Toledo / PCE Type: TM 15 2.0 Year of Make: 2017 For single and multiple containers with a straight infeed Running from left to right For PP films Output outlet max. 22 containers/min. Infeed width 100-200 mm Inlet length 50-350 mm Inlet height 30-150 mm Erecting device for 90° rotation of folding cartons Stacking station Automatic film change from work roll to stock roll by film splicer Camera/Track & Trace System for Serialization and Aggregation with PLM direct Software Label printer ZEBRA ZE500 with label applicator and PCE camera Ha ...
For Sale: Complete 10 MW / 2 MW Cogeneration Power Plant Available for immediate acquisition: a fully integrated power plant for the combined and efficient production of heat and electricity through a cogeneration system. Technical Description: The whole installation (Model: E.V.A.) for sale includes components listed below: STEAM BOILER Manufacturer: Wehrle Werk Year: 1999, Heating capacity: up to 10 MW Fuel type: biomass/RDF Fuel gas volume: 20.000 Nm³/h Fuel consumption: approx. 2500 kg/h Fuel need: approx. 20 000 t/a Average combustion temperature: approx. 900°C Main steam pressure: water steam with 40 bar Main steam temperature: 410°C Main steam mass flow: 11 t/h Combustion power gross: max. 10.000 kW Combustion power gross: min. 7000 kW Water content: 25 m³ STEAM TURBINE Manufacturer: KKK / Siemens SST110 Electrical capacity: up to 2 MW Year: 1999, serial ...
The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.
PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.
Key data: 4600 mm, 2200 mm
Striebig Panel Saw Compact 5220 Brand: Striebig Type: 5220 Compact with TRK extraction M-No.: 41596 Year of Make: 2010 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm Rpm: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,200 mm Max cutting height: 2,100 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,980 mm Machine depth: 1,466 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: 2ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked
Key data: 4600 mm, 2070 mm
Striebig Panel Saw Compact 5207 TRK - 2005 Brand: Striebig Type: 5207 Compact TRK M-No.: 30215 Year of Make: 2005 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm RPM: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,070 mm Max cutting height: 1,958 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,838 mm Machine depth: 1,428 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked
used rack oven Wachtel Compact 1.10 F, in baker's condition, ran perfectly until the end, 400 V, 50 Hz, heating power 104 kW, for trays 60 x 100 cm, for trolleys with 20 supports, incl. 1 rack trolley, with br. Oil burner, digital control, factory no. 71925
used rack oven Wachtel Compact 1.10 F, in baker's condition, ran perfectly until the end, 400 V, 50 Hz, heating power 104 kW, for trays 60 x 100 cm, for trolleys with 20 supports, incl. 1 rack trolley, with br. Oil burner, digital control, factory no. 72152, built in 2012
The vibration screen ASCO VS COMPACT is a robust, semi-mobile screening machine designed for high-performance material separation in recycling, construction, agriculture, and gardening. Equipped with two powerful vibration motors, it handles soil, gravel, wood chips, waste, chip bundles, and more with efficiency and reliability. Its compact, foldable design saves space and allows flexible use, while modular expansion options make it adaptable to different site requirements. The system can operate with one or two decks, separating materials into up to three fractions and can be expanded with modular conveyor belts and a funnel plate. The screen angle is adjustable for precise adaptation to various materials, and the unit is compatible with 400V connections. Quick-change screens work with perforated sheets, screen grids, or bar sizers to suit diverse tasks. The VS COMPACT combines ...
The ASCO VS Compact One Deck vibration screen is designed to handle diverse screening tasks efficiently, making it an excellent choice for recycling companies and businesses in construction, agriculture, and landscaping. Equipped with two powerful vibration motors, it ensures high screening performance and optimal material separation for soil, gravel, wood chips, waste, and other materials common in the recycling and building materials industry. Its semi-mobile design with a foldable construction saves space and makes transport and setup simple, while the modular system allows quick expansion to meet changing operational needs. Users benefit from adjustable screening technology, with a variable screen angle for precise adaptation to different materials and compatibility with a standard 230V power connection. Screen decks are easy to change and support various screen meshes and perf ...
Used pastry line RONDO, type: Smartline + Compactline - Satellite head at the front -Role -Calibrator - Compactline - Total length: 15 meters Visits and test runs are possible by arrangement.
table-size: 500 x 380 mm Overall size: 1400 x 1500 x 1800 mm weight of the machine ca.: 500 kg round table: 3-jaw chuck: diameter: 125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 190 kg,
Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.
Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I
MACHEREY-NAGEL NANOCOLOR VARIO compact Thermoblock / Digestion Block For sale is a used and functional NANOCOLOR VARIO compact thermoblock from company laboratory stock. Manufacturer: MACHEREY-NAGEL GmbH & Co. KG Model: NANOCOLOR VARIO compact Product no.: 91913 Marking on the device: NVC 1019 Technical data: 12 pulping stations for 16 mm round cuvettes Temperature range approx. 30–160 °C Preset temperatures: 70 / 100 / 120 / 148 / 160 °C Freely programmable temperatures Programmable heating times Suitable for analytical sample digestion and water/wastewater analysis Applications include COD/COD, total nitrogen and total phosphorus RS232 interface 110/230 V 50/60 Hz 125/250 VA Condition: The device is used and functional. It shows signs of wear and tear due to age and use. An up-to-date calibration or metrological qualification is not part of the offer. Scop ...
A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.
Height=1.97 m, Overall length= 1.1 m, Overall width= 7.3 m, Net weight= 2600 kg,
; Gross weight [kg]: 2160; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230
A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...
; Gross weight [kg]: 4080; Inspection Date: 2026-09-01; Amount of previous owners: 1; Lift height[mm]: 1015; Maximum lift capacity [kg]: 450
Bread loaf forming line composed of: -Weigher / divider / girder: For all types of dough (year 2007) Automatic lubrication system. Adjustable weight. from 60 to 600 grs. Speed variator. 40 kg hopper for dough, made of stainless steel and non-stick material. Flour sifter. Digital parts count. -400-basket resting chamber, manufactured in 2004. Adjustable time. -Bread loaf former, made in 2004 tape width: 600mm
GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.
CompaCLEAN III, For customers who prefer traditional dishwashers, CompaCLEAN offers the type of cleaning many are accustomed to while minimizing the shadow effect thanks to its unique linear tangent spray technology. PCBs are loaded into a typical kitchen dishwasher like plates., Application: Standard SMD assemblies., ���Capacity: Medium volume, ���Contamination solubility: slightly too moderate, To achieve sufficient cleaning quality and minimal cross-contamination, perfect filtration is required. Each PBT cleaning machine uses an independent closed circuit with a dedicated pump and filter system for each individual process step., CompaCLEAN can be easily configured to clean any size and shape of part by selecting different clamping solutions for larger or smaller PCBAs and using a single or double basket setup., Subject to prior sale, changes and errors!, Application: Stand ...
Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...
4-Wellen Hobelautomat SCM COMPACT 23 Gebraucht Maschine 4 spindeln Betriebszustand: exzellent CE-Zeichen: Ja volt. 380/50 mit werkzeug: Ja . No.04 Werkzeuge mit austauschbar Einwegmessern Kompositionsmaschine : 1st Spindel: Hobel. Motorleistung PS 5.5 (Kw 4) 2° Spindel und 3° Spindel : rechts vertikal und links vertical . Motorleistung PS 7.5 (Kw 5.5) 4th Spindel: Dickenhobel. Motorleistung PS 5.5 (Kw 4) Technische Details : 2-Gang-Vorschub. Motorleistung PS 1.3/1.7 (Kw 1/1.3) wellendrehzahl U/min 6000 Vorschubgeschwindigkeit : 6 / 12 mt./min max. nutzbare Arbeitsbreite mm. 230 max. nutzbare Arbeitshöhe mm. 125 wellendurchmesser mm.40 einlasslänge mm. 2300 SchmierSystem elektrische Höhenverstellung. motorleistung: 0.5 HP (0.37 kW) Gewicht kg. 1600 Bedienungsanleitung CE-zertifizierung
A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.
new
New mobile dental unit reversed including with new demountable chair type DENTA-COMP PREMIUM MAKER BPR DENTAL MOBILILLITY BPR SWISS Perfect machinery international whatsapp +31 653549259 The Netherland whatsapp +34 682511830 Spain
General SKU204U1433 LocationBarneveld CEcheck MakeCollin Type202x400 Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor Roll compactorTwo roll mill Roll width450 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck MaterialStainless steel General No.1209-06-07 Year of construction2007 Mounted on frame( steel wheels) Floorspace2,25x1,34 m Total height1,96 m Weight1900 kg Extra SpecificationsWork width 405 mm.walz tempering, +5 till +50°C.Fast hub back walz 80 mm,fine hub 0.08-2.99 mm.pressure cap. 100 kN.Without 2-roll walzenPowdered foodsStarchSugarAnimal feedConfectionerySolid pharmaceuticsMinerals & inorganicRoll compactorsCollinIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarIndustries > Food & Feed > Anima ...
Splitter Compact 30t Metre log splitter Motor 5.5KW 400V 50HZ Splitting force max. 30t Max. split material diameter 400 mm Torsion-resistant and particularly tilt-resistant construction with log lifter that erects the heavy trunks Swivelling table for particularly fast work Splits hardwood and softwood up to 1100 mm in length effortlessly and reliably G&SC-5905510902
General SKU300M410 LocationBarneveld MakeFuji Paudal Co.ltd TypeEXDFS-100 No.19034 Specified Features - Roll compactor Granulatorcheck Flat diecheck Die sizes260 x 160mm Number of dies available:1 Die perforationdia. ± 3mm Motorcheck With variable speed drivecheck Trough sizes315 x 180mm With motorcheck With variable speed drivecheck With metering screwcheck Screw sizesdia. ± 100mm With hoppercheck With jacketcheck Roll compactors MaterialStainless steel General Year of construction1988 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,3x1,2 M Total height1,4 M Weight900 KG Technical specs Extra informationtrough sizes: 315 x 180 mm: screw dia. ± 100mm: die sizes 260 x 160 mmPowdered foodsStarchSugarAnimal feedConfectionerySolid pharmaceuticsMinerals & inorganicRoll compactorsFuji PaudalIndustries > Food & Feed > Powdered foodsI ...
General SKU204U929 MakeCollin TypeForm 202x400 Year of construction2006 Mounted on framecheck Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor Roll compactorTwo roll mill Roll width405 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck MaterialStainless steel With jacketcheck General LocationBarneveld Mounted on wheels( steel wheels) Floorspace1,34x2,25 m Total height1,96 m Weight1900 kg CEcheck Extra SpecificationsWork width 405 mm.walz tempering, +5 till +50°C.Fast hub back walz 80 mm,fine hub 0.08-2.99 mm.pressure cap. 100 kN.Without 2-roll walzenPowdered foodsStarchSugarAnimal feedConfectionerySolid pharmaceuticsMinerals & inorganicRoll compactorsCollinIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarI ...
General SKU299X419 MakeCoperion Werner &: Pfleiderer GmbH Stuttgart TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Year of construction2004 Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Co-rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 General LocationBarneveld With switchgear(as is) Weight± 22.000 kg Extra SpecificationsComplete line with side-feeder, discharge screw and partially control cabinetinfo compounder:Krupp Werner &:amp: Pfleidere GmbHtyp: D315 EXTSingle screwscrew dia: 250 mmscrew lengte:1500 mm.screw van be heatedL/D: 6screw speed: 4,7 ...
General SKU437W1436 LocationBarneveld CEcheck MakeAgilent Specified Features - Miscellaneous Motor230 volt With jacketcheck General Type1100/1200 series Year of constructionunknown Floor space0,60x0,60 m Total height1,0 m Weight50 kg Extra SpecificationsWith Thermostar, FC/ALS therm, Degasser, Detector,&:nbsp:MiscellaneousOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicAgilent TechnologiesMiscellaneous > MiscellaneousIndustries > Food & Feed > ...
with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10
Cool Compact Pizza Cooling Table 2-door pizza counter with GN attachment mobile on wheels Granite slab +2°C +12°C Metrics WxDxH 107 x 70 x 113 cm Beleg stations - new and used - can be found in our shop! International shipping costs on request!
Dimensions (L/W/H): 0x0x0 mm Weight: 1600 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x1170x2300 mm Weight: 650 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 720x1000x1900 mm Weight: 300 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 30 , 16 , 4
Screw compressor Weight: approx. 750Kg Volume flow: 4.88 m³ Suction pressure: 1.0 bar Speed: 3000 1/min Motor power: 30 kW
maximum number of results exceeded
please refine your search
