comp used for sale

NEXO professional sound system that has equipped the two main courts of Roland-Garros: Philippe-Chatrier and Suzanne-Lenglen. This set combines GEO D10 speakers, NXAMP 4x1 and 4x4 amplifiers as well as PS8 speakers, with their transport, wiring and hanging accessories detailed below. Used for about ten editions of the tournament, for a fortnight per edition, the equipment has always been stored in protected reserves outside of its operation. The whole is in perfect working order. Complete system including: NEXO Geo D10 Speakers (7 Black + 9 White) 5 Flight-House-Roulette Geo D10: 4 Trio + 1 quartet 3 NEXO NXamp 4x1 in flight 3 NEXO NXamp 4x4 in flight 14 NEXO PS8 speakers Sold with wiring, accessories and slings Auction-ID: A1-51202-1

Bamdura decking board 2200x143x22 mm – grey. Co-extrusion decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Gray wood look finish. Auction-ID: A1-45127-2157

Bamdura decking board 2900x146x23 mm – Grey PE decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. With gray ribbed finish. Auction-ID: A1-45127-2159

unused; Motor 1.8KW/2.5HP; 8 Bar 115 PSI 0.8 Mpa; 2 connections; 9596 Auction-ID: A1-51257-559

Decking board co-extrusion composite in the color gray with wood structure. The dimensions are 420x14.5x2.3 cm each. Co-extrusion is a type of shaping technique in which two (or more) types of materials are pressed through a mold or mold. The co-extrusion of composite decking boards has an extra protective layer around the product. This extra layer ensures that the composite products have even more advantages than normal composite decking. Co-extrusion ensures that the planks are very dirt-repellent and you therefore have to deal with a broom even less. Another big advantage is that composite decking boards and decking tiles with co-extrusion have an anti-slip layer. Auction-ID: A1-45127-2313

Bamdura solid decking board 2200x143x22 mm – Grey. PE solid decking boards with ribbed gray finish. Very strong, dimensionally stable and low maintenance. Resistant to moisture, UV radiation and discoloration. Suitable for terraces and intensive use. Auction-ID: A1-45127-2162

Unused; Motor 5.5KW/7.5HP; 8 Bar 115 PSI 0.8 Mpa; 2 connections; 9598 Auction-ID: A1-51257-561

including consisting of; air conditioning unit; compressor; pipes; mounting material; braces; cables; insulation material; For a complete overview see photo inventory list; in original packaging; on pallet; Auction-ID: A1-47451-3501

Permissible gross weight: 630 kg (or 530 kg empty weight) Engine power: 24.1 kW (at 2900 rpm) Operating pressure: 7 bar Sound power level: (98dB) Total length: 2300 mm Auction-ID: A1-51523-48

connection: 230 V; description: unused; 4461; Auction-ID: A1-51257-453

Karl Storz Telepack – Compact Portable Endoscopy Unit Manufacturer: Karl Storz Model: Telepack Auction-ID: A1-51618-510

This lot must be mined by the buyer himself Auction-ID: A1-51062-210

Rpm: 2950. Inner size: 10mm Auction-ID: A1-42990-80

Inner workings pipe diameter: 750mm. Auction-ID: A1-42990-228

Philips L15-7io – Compact Linear Ultrasound Probe Manufacturer: Philips Model: L15-7io It is compatible with the ultrasound systems: Philips HD11, HD11XE, iU22 and iE33. Auction-ID: A1-51618-182

Capacity: 15 bar. Electric motor: 11kW. Number of operating hours: 1789h. Auction-ID: A1-42990-42

With about 600 storage boxes, 52 sections of shelving, length 3 meters, different heights. This lot must be mined by the buyer himself Auction-ID: A1-51062-209

Datex-Ohmeda Aestiva 3000 – Complete Mobile Anaesthesia Station Manufacturer: Datex-Ohmeda Model: Aestiva 3000 Including 1 multiparametric monitor with DATEXOHMEDA S/5 anaesthesia parameters (ECG, NIBP, SPO2, Resp, T°, EtCO2, halogenated gases) A Sevoflurane tank spray PIRAMAL anaesthesia agent A Desflurane DATEX-OHMEDA spray model TEC 6 PLUS All necessary accessories (balloons, masks, cannulas, ...) Last maintenance check: 12/12/24 Auction-ID: A1-51618-489

Philips L15-7io – Compact Linear Ultrasound Probe Manufacturer: Philips Model: L15-7io Auction-ID: A1-51618-131

Philips L15-7io – Compact Linear Ultrasound Probe Manufacturer: Philips Model: L15-7io It is compatible with the ultrasound systems: Philips HD11, HD11XE, iU22 and iE33. Auction-ID: A1-51618-174

Karl Storz – Complete Cystoscopy Set with Case Manufacturer: Karl Storz Obturator Set Karl Storz 27026 BO Optical Rod Karl Storz 27021 O Karl Storz Sheath 27028 B Karl Storz Sheath 27026 B Karl Storz Coagulation Electrode 27770 D Catheter Deflection Mechanism Karl Storz 27026 EC Monopore Urological Telescope Bridge Karl Storz 27025 G High Frequency Cable Karl Storz 39360B Case / Case Auction-ID: A1-51618-1

Medrad Veris 8600 – MRI-compatible vital signs monitor with remote display Manufacturer: Medrad Model: Veris 8600 Set consisting of A multiparametric monitor A receiver screen Two communication boxes An ECG, SPo2, blood pressure monitor A charger Auction-ID: A1-51618-437

Otopront Basic Plus – Complete ENT Consultation Unit with Zeiss OPMI Pico Microscope and Chair Manufacturer: Otopront Model: Basic Plus Complete ENT Consultation Station Including: Otopront Basic Plus ENT Consultation Unit (3 Storage Compartments, 3 Drawers, 3 Tray Holders, 3 Consumable Dispensers, 550 mm Width) Enlarged top tray, heated instrument tray with thermostatic control, drip tray and waste container Zeiss OPMI Pico operating microscope, side-mounted on the unit, integrated lighting Otopront Sit 4 motorised ENT examination chair (sand cover, leg rest, folding footrest, brake accessible from both sides) Xion rigid nasopharyngoscope item no. 130.400.027 (working length 300 mm, diameter 2.7 mm) Focusable cold light head with light guide and cold light cable 180 cm Side light cube, keyboard stand, movable base on double castors, mounting kit Colours: upper part RAL 1015, lo ...

1x Equipped with a digital Mitutoyo dial gauge (with absolute system). Auction-ID: A7-51635-15

Datex-Ohmeda Aestiva/5 7900 – Complete Mobile Anaesthesia Workstation Manufacturer: Datex-Ohmeda Model: Aestiva/5 7900 Including 1 multi-parameter monitor with anaesthesia parameters DATEXOHMEDA S/5 (ECG, NIBP, SPO2, Resp, T°, EtCO2, halogenated gases) A Sevoflurane tank spray with PIRAMAL anaesthesia agent A Desflurane DATEX-OHMEDA spray model TEC 6 PLUS All necessary accessories (balls, masks, cannulas, ...) Last maintenance check: 12/12/24 Auction-ID: A1-51618-442

Datex-Ohmeda Aestiva 3000 – Complete Mobile Anaesthesia Station Manufacturer: Datex-Ohmeda Model: Aestiva 3000 Including 1 multiparametric monitor with DATEXOHMEDA S/5 anaesthesia parameters (ECG, NIBP, SPO2, Resp, T°, EtCO2, halogenated gases) A Sevoflurane tank spray PIRAMAL anaesthesia agent A Desflurane DATEX-OHMEDA spray model TEC 6 PLUS All necessary accessories (balloons, masks, cannulas, ...) Last maintenance check: 12/12/24 Auction-ID: A1-51618-460

Equipped with Schneider UniMaster ST 270 liter pressure barrel, Schneider DK 985 Eco air dryer and Schneider Öwamat 10 oil-water separator Auction-ID: A1-51062-153

Sager S301 – Pull Splint, Complete Set Manufacturer: Sager Model: S301 Auction-ID: A1-51618-98

Equipped with 2024 Vosair Air Dryer type: CRDP-100, capacity 1666 liters/min. Max working pressure 16 bar. 230V. Auction-ID: A1-42990-43

An office container complex with glazing on three sides, consisting of two connected container modules, is offered. Base dimensions per container module: 3 × 6m. Interior height: approx. 2.7m. Cooling/heating capacity: 2.5kW. Equipped with glazing on three sides, two frameless glass doors at the front, solid wall panels, fabric ceilings, track-mounted LED spotlights and air conditioning for cooling and heating. Color: RAL 7016 anthracite. Inspection possible by arrangement.

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width x ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Graphics control C55 D Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with elek. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weigh ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: C55D Graphics Controller Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with electr. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V /  ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: C55D graphics control Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with electr. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz  ...

Key data: 45 , 10 , 8

1 pc Renner scrubbing compressor 45 Kw speed-controlled 1 Renner Refrigeration Dryer 1 Renner compressed air tank 3000 L 2 pcs. filters, cyclone separators 1 Pc Oil Water Separator 1 x exhaust air 90° arc and approx. 3m straight duct

Reciprocating compressor, Gea V600, medium NH3, freezing applications 25 bar – used - : Price from location: 29.500.-€ (net) dismantled, packed and loaded! Manufacturer: GEA Type: Grasso V 600 Package Year of Make: 2022 Serial Number: 220725-6417 PT: 38 5 bar PS LP 25 bar HP HP 25 bar TS Zone A: -60/+150 C TS Zone B: - 10/+170 C TS Zone C: +15/+45 C Flow rate (m³/h): 580 Number of cylinders: 8 Speed range: (rpm/min): 500 – 1,500 Former new price: 45.000.-€ (net) Condition: good Available: immediately Location Bünde, NRW Manufacturer's text: The GEA Grasso V 600 Package is an industrial reciprocating compressor unit from GEA for refrigeration and heating technology, which is designed for the natural refrigerant ammonia (R717 / NH₃) as standard. Package features: Pre-assembled complete units including compressor, drive motor, oil management, sens ...

Two used, air-cooled compressed air refrigeration dryers in good external condition with inspection stickers from 2025. Manufacturer: Ingersoll Rand Model No.: D1890EC-A Series: D-EC Premium Efficiency Machine Type: Compressed Air Refrigeration Dryer Year of construction: 2016 / 2017 Air flow: 31,500 l/min (1,890 m³/h) Electrical power: 6.79 kW Power supply: 400 V / 3 phases / 50 Hz Refrigerant: R407C Refrigerant capacity: 4.2 kg Maximum air inlet pressure: 13 bar Maximum refrigerant pressure LP/HP: 18 / 29 bar Air inlet temperature: +5 to +60 °C Ambient temperature: +2 to +45 °C Sound pressure level: 78 dB(A) Connector size: 3 inches Control: Electronic control with digital display Cooling: Air-cooled Condition: Used, good external condition Examination: Inspection stickers from 2025 available Number of units available: 2

Three used, oil-free screw compressors with Ingersoll Rand Intellisys control. Manufacturer: Ingersoll Rand Model: Nirvana OF N75 Machine Type: Oil-Free Screw Compressor Years of manufacture: 2007, 2008 and 2009 Maximum permissible operating pressure: 10 bar Shaft power: 75 kW Speed: 4,200 rpm Weight: 2,041 kg Voltage: 380–460 V Phases: 3 Frequency: 50–60 Hz Control: Ingersoll Rand Intellisys with digital display Serial number built in 2007: 2643044 Serial number built in 2008: 2643064 Serial number built in 2009: 2643065

Used oil-free screw compressor with 75 kW shaft power and Ingersoll Rand Intellisys control. Manufacturer: Ingersoll Rand Model: Sierra SM75 Machine Type: Oil-Free Screw Compressor Year of Make: 2006 Serial Number: 2630138 Maximum permissible operating pressure: 8.5 bar Shaft power: 75 kW Speed: 2,955 rpm Weight: 2,682 kg Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Control: Ingersoll Rand Intellisys Last documented service: 29.11.2019 at 47,739 operating hours Next maintenance according to the maintenance label: 49,800 operating hours Condition: Used

Used compressed air refrigeration dryer MTA DE225 for drying compressed air in industrial compressed air systems. Manufacturer: MTA S.p.A. Type: DE225 Year of Make: 2006 Serial Number: 2200091067 Voltage: 400 V Phases: 3 Frequency: 50 Hz Installed power: 6.0 kW Maximum current consumption: 11.0 A Degree of protection: IP22 Refrigerant: R134a Refrigerant capacity: 4.72 kg Maximum permissible refrigerant pressure low pressure side: 22.6 bar Maximum permissible refrigerant pressure high-pressure side: 26.0 bar Maximum operating pressure compressed air: 16 bar Maximum operating temperature compressed air: 70 °C Ambient temperature: +5 to +50 °C Sound pressure level:

Used Ingersoll Rand F19V compressed air filter with filter element 5075V for the treatment of compressed air in industrial compressed air systems. Manufacturer: Ingersoll Rand Model: F19V Filter element: 5075V Maximum operating overpressure: 16 bar Maximum operating temperature: 80 °C Tank volume: 22 litres Factory number: 08/55437 Equipment: Electronic differential pressure indicator, automatic steam trap Condition: Used

Ingersoll Rand IRGP481 Compressed Air Filter with BEKO Steam Trap Used Ingersoll Rand compressed air filter IRGP481 with electronic differential pressure indicator and BEKO BM12 steam trap. Manufacturer: Ingersoll Rand Model No.: IRGP481 Filter Element Kit: 88343876 Condensate Drain Kit: 88343272 Item number drain kit: 88349535 Differential pressure gauge: Available, display defective Steam trap: BEKO BM12 Operating pressure steam trap: 0.8–16 bar Steam trap operating temperature: +1 to +60 °C Power supply steam trap: 230 V AC, 50-60 Hz Steam trap protection rating: IP65 Condition: Used Location: Rehweiler

Used RENNER RS 22 screw compressor for industrial compressed air supply with a delivery rate of 3,100 l/min and a permissible operating overpressure of 8 bar. Manufacturer: RENNER Kompressoren Type: RS 22 Year of Make: 2013 Serial number: 306124 Power requirement: 22 kW Delivery volume: 3,100 l/min Delivery volume: 3.1 m³/min Permissible operating overpressure: 8 bar Type: Screw compressor Design: Soundproofed compact housing Controls: Start and stop buttons Displays: Hour meter, temperature display, pressure gauge Condition: Used

Parts package from new vehicle with 0 km, year of construction 2017. Complete vehicle in parts except for body airbags, belts, engine control unit, immobilizer Engine complete Gearbox Axles Exhaust Drive parts Wheels Brake system Chrome-Line body parts with LED headlights Radiator Package Lighting Seats Carpet Dashboard Steering Wheel Display MMI Navigation Speedometer All fairings All parts are packed in boxes on 3 pallets LxWxH = 250x120x140 cm. Loading by forklift Transport and export worldwide can be arranged on request Auction-ID: A1-51819-10011

Deckel FP2 Milling Machine Component Type: Milling machine component Manufacturer: Deckel Model: FP2 Length: approx. 100 cm Height: approx. 31 cm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51509-59

Technical details Manufacturer: AIRHORSE Model: AHS-10A Type: Fixed-speed screw air compressor Free air delivery: 0.9 m³/min Working pressure: 10 bar Motor power: 7.5 kW (10 HP) Power supply: 380 V / 3 Ph / 50 Hz Compression stage: Single-stage Airend: Baosi IP55 Configuration: - Fixed-speed operation - Rotary screw compressor technology - Industrial compressed-air generation system - Integrated electric motor drive Application: - Workshop compressed-air supply - Industrial production facilities - Pneumatic equipment operation - Manufacturing and maintenance environments Construction: - Single-stage screw compression system - IP55-rated airend assembly Auction-ID: A7-51645-26

ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-51645-11

AIRCOMP JYF20HHA 15 kW PM Integrated Variable-Speed Air Compressor Manufacturer: AIRCOMP Model: JYF20HHA-15KW-1.0MPa PM Integrated Equipment type: VFD-Controlled Integrated Air Compressor Motor power: 15 kW Certification: CE Factory warranty: 1 year Compact direct-drive air compressor with permanent-magnet motor and variable-frequency drive (VFD) for automatic capacity control and efficient compressed-air production. Technical specifications: Volume flow: 1.7 m³/min Rated discharge pressure: 1.0 MPa / 10 bar Cooling: Air cooled Ambient temperature: -5 to +45°C Discharge temperature: < ambient +15°C Oil content in air: 3 ppm Noise level: 66 ±2 dB(A) Lubricating oil grade: 46 Transmission: Direct drive Capacity control: VFD Outlet: Rp 3/4 in Motor: 15 kW, 2,700 rpm, VFD start, IP23, insulation class F Fan: 0.28 kW, 400 V / 50 Hz, 1,300 rpm, air vo ...

AIRCOMP JYF10 7.5 kW PM Integrated Variable-Speed Air Compressor Manufacturer: AIRCOMP Model: JYF10 7.5KW-1.0MPa PM Integrated Equipment type: VFD-Controlled Integrated Air Compressor Motor power: 7.5 kW Certification: CE Factory warranty: 1 year Compact direct-drive air compressor with permanent-magnet motor and variable-frequency drive (VFD) for automatic capacity control. Technical specifications: Volume flow: 0.9–1.0 m³/min Rated discharge pressure: 1.0 MPa / 10 bar Cooling: Air cooled Ambient temperature: -5 to +45°C Discharge temperature: < ambient +15°C Oil content in air: 3 ppm Noise level: 66 ±2 dB(A) Lubricating oil grade: 46 Transmission: Direct drive Capacity control: VFD Outlet: Rp 1/2 in Motor: 7.5 kW, 3,000 rpm, VFD start, IP23, insulation class F Fan: 0.15 kW, 400 V / 50 Hz, 1,350 rpm, 2,600 m³/h Dimensions (L × W × H): 9 ...

Technical details Manufacturer: AIRHORSE Model: EPM-10A Type: PM VSD screw air compressor Free air delivery: 0.9 m³/min Working pressure: 10 bar Motor power: 7.5 kW (10 HP) Power supply: 380 V / 3 Ph / 50 Hz Compression stage: Single-stage Airend: Baosi IP55 Configuration: - Permanent magnet motor - Variable speed drive (VSD) - Rotary screw compressor technology - Industrial compressed-air generation system Application: - Workshop compressed-air supply - Industrial production facilities - Pneumatic equipment operation - Manufacturing and maintenance environments Construction: - Single-stage screw compression system - IP55-rated Baosi airend - Energy-efficient variable-speed operation Auction-ID: A7-51645-27