comp used for sale

Haulotte - Compact 8W, year 2013 - Internal no. 3514 Platform height: 6.27 m Platform extension: 0.92 m Platform Extension Load Capacity: 150 Kg Platform length extended: 3.23 m Gradeability: 23% Ground clearance - pothole protection unfolded: 13 cm Ground clearance - pothole protection folded down: 2.5 cm Batteries Hole entry protection Non-marking tyres Forklift Bags Auction-ID: A1-49356-21

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-49902-71

Brand: MARTINEZ SOLE Year: 2003 Material: 304 stainless steel, raw cold-rolled interior, BLAF 2B exterior Capacity: 610 hL (61,000 litres) divided into 260 hL + 175 hL + 175 hL Configuration: temperature-controlled vertical cylindrical tank on legs, 3 superimposed compartments, sloping flat bottom Diameter: 3600 mm Overall height: 9100 mm approx. High compartment: central chimney, hatch Ø 500 with clamping studs, 1 winding pipe, gangway support, stainless steel door 1000 x 800 mm with guillotine opening with mud flap, stainless steel ball valve Ø 70 clear, stainless steel taster, 8 m² channel thermoregulation circuit, strip level, self-emptying spoon bottom, total emptying by stainless steel ball valve Ø 70 Middle compartment: off-centre chimney, hatch Ø 500, oval autoclave door 310 x 420 mm with internal opening, stainless steel ball valve Ø 70 and decanter elbow, stainless steel ...

Haulotte - Compact 8W, year 2011 - Internal No. 1507 Platform height: 6.27 m Platform extension: 0.92 m Platform Extension Load Capacity: 150 Kg Platform length extended: 3.23 m Gradeability: 23% Ground clearance - pothole protection unfolded: 13 cm Ground clearance - pothole protection folded down: 2.5 cm Batteries Hole entry protection Non-marking tyres Forklift Bags Auction-ID: A1-49356-25

Lot consisting of components of the NovaSignal NovaBot Automated Headset system: Head Cradle headrest model NA-RBTHC1, left robotic module Probe Pod Left model NA-PPL1 and right Probe Pod Right module model NA-PPR1. A Cybernet CyberMed M156X touchscreen medical panel PC completes the equipment, kept in a hard case with internal padding. NovaBot components are placed in special protective shaped packaging. Incomplete configuration. Auction-ID: A7-50010-8

Parts package from new vehicle with 0 km, year of construction 2017. Complete vehicle in parts except for body airbags, belts, engine control unit, immobilizer Engine complete Gearbox Axles Exhaust Drive parts Wheels Brake system Body parts with LED headlights Radiator Package Lighting Seats Carpet Dashboard Steering Wheel Display MMI Navigation Speedometer All fairings All parts are packed in boxes on 3 pallets LxWxH = 250x120x140 cm. Loading by forklift Transport and export worldwide can be arranged on request Auction-ID: A1-50006-10009

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-49902-72

AMMANN-Duomat Compaction Roller Brand: AMMANN-Duomat Type: Pedestrian Tandem Compaction Roller Serial number: appears to be DR 70 Manufacture number: 43026 Year of construction: 1991 (plate reading) Manufacturer: AMMANN-Duomat Verdichtung GmbH Manufactured: Germany Use: compaction of asphalt, gravel, soils and road works Visual condition: old, strongly marked paint, presence of rust and traces of use. 2. WACKER compactor roller Brand: Wacker Type: Self-supporting tandem compactor roller Engine: combustion engine Configuration: 2 metal cylinders, driver's position on the machine Use: soil compaction, stonework and coatings Visual condition: heavily used, visible corrosion on the cylinders and marked bodywork. The nameplate is present, but it is too hidden/worn in the photo to properly confirm the model, year, and serial number. Auction-ID: A3-46157-35131

Volume flow rate at 7.5 bar 0.60 m³/min = 600 l/min Volume flow rate at 10 bar 0.48 m³/min = 480 l/min Volume flow rate at 13 bar 0.37 m³/min = 370 l/min Dimensions: approx. 590 × 1,090 × 1,560 mm (W×D×H) Noise level: approx. 61 dB(A) Auction-ID: A1-49964-52

Lot consisting of components of the NovaSignal NovaBot Automated Headset system: Head Cradle headrest model NA-RBTHC1, left robotic module Probe Pod Left model NA-PPL1 and right Probe Pod Right module model NA-PPR1. A Cybernet CyberMed M156X touchscreen medical panel PC completes the equipment. Incomplete configuration. Auction-ID: A7-50010-20

Haulotte - Compact 8W, year 2013 - Internal No. 3520 Platform height: 6.27 m Platform extension: 0.92 m Platform Extension Load Capacity: 150 Kg Platform length extended: 3.23 m Gradeability: 23% Ground clearance - pothole protection unfolded: 13 cm Ground clearance - pothole protection folded down: 2.5 cm Batteries Hole entry protection Non-marking tyres Forklift Bags Auction-ID: A1-49356-22

Parts package from new vehicle with 0 km, year of construction 2017. Complete vehicle in parts except for body airbags, belts, engine control unit, immobilizer Engine complete Gearbox Axles Exhaust Drive parts Wheels Brake system Chrome-Line body parts with LED headlights Radiator Package Lighting Seats Carpet Dashboard Steering Wheel Display MMI Navigation Speedometer All fairings All parts are packed in boxes on 3 pallets LxWxH = 250x120x140 cm. Loading by forklift Transport and export worldwide can be arranged on request Auction-ID: A1-50006-10008

✅ Brand: Haulotte ✅ Type: Compact 8 CU ✅ Scissor lift: ✔️ ✅ Electric: ✔️ ❌ Diesel: ✖️ ✅ Year of construction: 2016 ✅ Serial Number: 2002884 ✅ Working height mm: 8000 ✅ Platform capacity kg: 300 ✅ Number of persons: 2 ✅ Battery: ✔️ ✅ Own weight kg: ±1980 ✅ Indoor & outdoor use: ✔️ ✅ CE documentation: ✔️ Auction-ID: A3-46156-11107

Robust and compact Shibaura SD2200-0 4x4 tractor, equipped with diesel engine and 24 hp power. A handy and manoeuvrable tractor for a variety of activities in agriculture, horticulture, horse husbandry, green maintenance or private use. The tractor starts well, drives well and the engine runs smoothly. According to the seller's specifications, the machine can be used immediately - Specifications: Drive: 4x4 / four-wheel drive, Fuel: diesel, Power: 24 hp, Engine: 2-cylinder diesel, Manual transmission, Multiple forward and reverse gears, 3-point rear linkage, Rear PTO / PTO, Hydraulic linkage, Open driver's seat, Agricultural tyres front and rear, Lighting/signalling available - Thanks to the four-wheel drive, 3-point linkage and PTO this Shibaura is suitable for use with a variety of attachments, such as a tiller, mower, flail mower, cultivator or other suitable implements. The tractor i ...

Equipped with: Ladder, metal stock of approximately 50% stainless steel, 35% Steel, 15% Aluminum see stock list for the exact figures Auction-ID: A1-47360-1

Brand: MARTINEZ SOLE Year: 2003 Material: 304 stainless steel, raw cold-rolled interior, BLAF 2B exterior Capacity: 610 hL (61,000 litres) divided into 260 hL + 175 hL + 175 hL Configuration: temperature-controlled vertical cylindrical tank on legs, 3 superimposed compartments, sloping flat bottom Diameter: 3600 mm Overall height: 9100 mm approx. High compartment: central chimney, hatch Ø 500 with clamping studs, 1 winding pipe, gangway support, stainless steel door 1000 x 800 mm with guillotine opening with mud flap, stainless steel ball valve Ø 70 clear, stainless steel taster, 8 m² channel thermoregulation circuit, strip level, self-emptying spoon bottom, total emptying by stainless steel ball valve Ø 70 Middle compartment: off-centre chimney, hatch Ø 500, oval autoclave door 310 x 420 mm with internal opening, stainless steel ball valve Ø 70 and decanter elbow, stainless steel ...

Used machine - completely overhauled - ready to use, no costs to be expected! BRIQUETTING PRESS Model No. E55 Year: 2010 Briquette diam. 55 mm, Engine kW 5.5 (High Efficiency). Production from 15 to 60 Kg/h. Dimensions: H 1.510 mm, 1.700 mm, 1.170 mm. Kg 600. Technical characteristics: Oleodynamic Machine; No. 7 Cycles per minute approximately with the machine at full speed; 3 cylinders; 1 Monobloc vice; Maximum length. of each expulsion 50 mm; 1 capacitive probe for working in automatic mode; 1 viewfinder; Shell diam. 1,000 mm. Capacity capacity ~ 0.73 m3; End-of-cycle device; Electronic pressure gauges, pump and vise; PLC Touch Screen Siemens; Siemens Display; hour meter; Inductive limit switches; Machine position control by LED; Stamping head; Preheating system; Oil and temperature level sensor; Current Stabilizer; Service keys; Voltage 400V – 50 Hz Stand ...

Technical data Manufacturer/Supplier: P-D Glasseiden GmbH Oschatz Material: Glass Fiber/Glass Fiber Material in Rolls Type / Designation: KNR AMRM 120/300/1056R1/300-12-100S Width: 12.0 cm Length: 67.0 m Weight: 15.0 kg Area: 8.0 m² Charge: 2620KW Material: KNR247 Remarks The packaging shows partial openings and damage. The exact remaining contents and the completeness of the individual rolls have not been checked. Sale as seen. Auction-ID: A1-50026-82

Fully equipped with: • Sturdy extractor hood with adjustable position • Refrigerated workbench with freezer function • Sink with hot and cold water • Multiple sockets in the trailer • Full stainless steel interior (HACCP-proof) • Interior and exterior lighting Auction-ID: A1-47416-85

2 cylinders, speed 1440 rpm, low noise, with emergency stop button, capacity 750 liters per minute, pressure tank 257 liters capacity, automatic condensation drain system of the pressure tank and main shut-off valve, automatic moisture and air filter regulator, automatic shut-off at 10 bar pressure. With thermal motor protection. Polar Hiross DXB012S. S, 220 volts, with automatic condensation drain system on the freeze-dryer, maximum working pressure 16 bar. Auction-ID: A1-48994-20

There are a total of two identical devices for sale this is device no. 2 of 2 Manufacturer: Systèmes-Attum (France) Model: CS17 Industrial touch screen PC/HMI control panel ATEX certified for hazardous areas Certification: II 3 G Ex nA [ic] IIB T4 Gc Certificate: DEKRA 15 ATEX 0052X Intel Celeron J1900 processor, 1.99 GHz 4 GB RAM 120 GB memory Wi-Fi integrated Passive cooling USB, COM and network ports available Robust industrial housing Made in France Used condition with usual signs of wear Auction-ID: A1-49581-80311

9 bar, Deutz engine, hour position: 1010 hours. Auction-ID: A1-47389-371

Concerns unused product. 18.2Kw, 14 bar. Auction-ID: A1-47389-165

Equipped with: PTO rear axle, rear linkage, lighting, cab. Auction-ID: A1-47389-289

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and transport ready (note trailer is included, color of Tiny house is stone motif with black grout photos are attached, color like photo 2) (trailer does not include papers) (note furniture not included) (note this model does not have a glass wall on the left side wall photos are for illustration, inside it is exactly the same) (transport Tiny house dimensions 590x220x248 cm, weight 3500 kg) (trailer and Tiny house are loaded separately) Auction-ID: A1-47444-50

Included: 1 x pressure vessel 2000 liters, 2300 mm high, 1 x refrigerant dryer for compressed air Model: CD50F-ES, power consumption: 0.954 kW, voltage: 230 V / 1 phase / 50 Hz, refrigerant: R513A (0.90 kg), year of construction: 2024, 1 x pneumatic swivel actuator-Automatically opens and closes the ball valve with compressed air, CompAir compressed air filter and container. Auction-ID: A7-49604-16

Hours: 812 hours. 7 bar. Own weight 561kg. Serial number: 1746001. Equipped with Kubota 3-cylinder engine. Working well. Auction-ID: A1-47389-391

There are a total of two identical devices for sale this is device No. 1 of 2 Manufacturer: Systèmes-Attum (France) Model: CS17 Industrial touch screen PC/HMI control panel ATEX certified for hazardous areas Certification: II 3 G Ex nA [ic] IIB T4 Gc Certificate: DEKRA 15 ATEX 0052X Intel Celeron J1900 processor, 1.99 GHz 4 GB RAM 120 GB memory Wi-Fi integrated Passive cooling USB, COM and network ports available Robust industrial housing Made in France Used condition with usual signs of wear Auction-ID: A1-49581-80301

Object Mixed lot of roll goods for the processing of fibre composites, manufacturer MetYX Composites. Contents - Product code: 5200.002.150 - Type LTM600/300 E10A - Width 1,270 mm - Length 50 m - Roll weight 57.80 kg - Multiple roles available Remarks The rolls are mainly in protective packaging and are stored on pallets. In some cases, the packaging is opened or damaged. Other rolls are available; the exact total quantity must be checked on site. Auction-ID: A1-50026-74

Technical data Manufacturer: P-D Glasseiden GmbH Oschatz / Oschatz-Glas Type: KNR AMRM 120/300/1056R1/300-201-100S Material: Textile Glass Complex Material no.: KNR099 Length: 67.0 m Width: 201.0 cm Area: 134.7 m² Total weight: 241.0 kg Charge: 2620KW Remarks The storage was mainly packed. The outer packaging has partial damage and openings. Completeness and internal condition have not been checked. Sale as seen. Auction-ID: A1-50026-83

Equipped with Kubota 3-cylinder engine. Auction-ID: A1-47389-394

Buffer tank size approximately 170x45øcm there are no tools available for loading this lot. Plot is being prepared for transport. Auction-ID: A1-47444-93

Manufacturer: Mauguière Year: 2014 Power supply: 400 V – 50 Hz – Three phase Power: 7.5 kW Operating pressure: 8 bar Remarks: Hour meter: 23,946.6 h – Sold with its 500 L SICC 500/3110 air tank and its Atlas Copco FD 16 air dryer. Atlas Copco tank: 500 L capacity, maximum pressure 11 bar, year 1998 – Atlas Copco FD 16 dryer, year 1998. Auction-ID: A1-50001-48

Complete professional stainless steel catering kitchen with Palux cooling/workbenches and extraction system Features: 1 L-shaped stainless steel cooler/workbench, dim. approx. 283 x 180 x 90 cm 8 cooling drawers 1 sink 1 Palux frying unit 1 Palux neutral unit 1 stainless steel extractor hood, length approx. 410 cm Nu-Air control box for extraction system Palux L-shaped stainless steel cooling/workbench, dim. approx. 300 x 155 x 90 cm 10 cooling drawers 1 Ecofrost refrigerator/workbench, dim. approx. 137 x 87 x 70 cm 1 Gamko Freestanding Cooling 1 Palux WS stainless steel warming/work island, built in 2019 Warming / workbench equipped with 2 zones and hanging part 2 Gruko hot plates Particularities: This is a complete professional stainless steel kitchen setup as shown PLEASE NOTE: the installation must be professionally disassembled by the buyer Buyer must take ...

Complete Wheel Set BKT Ride Max IT 696 – John Deere 5080R Complete technical wheel set consisting of four agricultural tires with matching rims, taken from a John Deere 5080R. The set consists of two front wheels and two rear wheels. Specifications: Brand: BKT Type: RIDEMAX IT 696 Quantity: 4 complete wheels Construction: Radial Version: tubeless Front tires: 400/80R24 IND, approx. 14.9 R24 Rear tires: 480/80R34 IND, approx. 18.4 R34 Front rim: approx. 13 inches Front tyre diameter: approx. 1,250 mm Roller circumference front tyre: approx. 3,760 mm Rear tyre diameter: approx. 1,632 mm Rear tyre circumference: approx. 4,894 mm Rear tire load/speed index: 164A8/159D Maximum rear tyre load: approx. 5,000 kg at 40 km/h Pitch front: approx. 275 mm Pitch back size: approx. 205 mm Origin: John Deere 5080R Features: Transport-oriented block profile Broad footpri ...

Bomag BPR 55/65 D Diesel Plate Compactor – 2005 – 435 kg – 55 kN Specifications: Brand/type: Bomag BPR 55/65 D Year of construction: 2005 Serial Number: 1016920401006 Engine: Kohler diesel Engine power: approx. 6.6 kW Fuel: diesel Centrifugal force: approx. 55 kN Vibration frequency: approx. 66 Hz Base plate/working width: approx. 650 mm Operating weight: approx. 435 kg Overall dimensions: approx. 1,700 × 650 × 1,350 mm Maximum working speed: approx. 28 m/min Maximum slope: approx. 35% Features: Mechanically reversible drive Adjustable handlebar Control lever for driving and vibration Protective cover over the engine Lifting facility Particularities: Loading can be performed. There is a forklift and loading dock available. Auction-ID: A1-47389-266

Technical data Manufacturer/Brand: Chicago Pneumatic Type: CPA 15 500 D CE Year of Make: 2013 Serial Number: CAI6558403 Weight: 446 kg Working pressure: 10 bar Max. pressure: 10 bar Compressor: 11 kW, 400 V, 3 Ph Dryer: 0.58 kW, 230 V, 1 Ph Pressure vessel: 500 l, hp 11 bar Refrigerant: R134a, 0.5 kg Configuration Compressor unit with integrated compressed air dryer, 500 l pressure vessel and electronic control ES 3000. Auction-ID: A1-50026-61

Knegt DF254 compact tractor – 25 hp – 459 hours Specifications: Brand/type: Knegt DF254 Fuel: diesel Engine: 3-cylinder diesel engine Power: approx. 18.4 kW / 25 hp Reading hours: approx. 459 hours Transmission: mechanical Dimensions: approx. 338 × 155 × 230 cm (L × W × H) Wheelbase: approx. 173 cm Ground clearance: approx. 30 cm Own weight: approx. 1,350 kg, depending on version and mounted weights Features: Power steering Hydraulic three-point rear linkage Rear PTO shaft Flip-up ROPS safety bar Front weights Lighting Wide rear tyres with turf/terrain tread pattern Open driver's seat with seat Particularities: Charging can be done on location; forklift and loading dock are available. Auction-ID: A1-47389-228

Hours: 484. Equipped with Kubota 3 cylinder engine 18.1kW. 7 bar. Auction-ID: A1-47389-392

Object Mixed lot of glass complex / glass fibre composite material, consisting of several rolls on pallets. Version WR0600/S300/04H01/125. According to the enclosed data sheet, construction made of woven roving, CSM and stitch, total surface weight 910 g/m² and standard width 125 cm. Contents - Rolls Glass Complex / Glass Fiber Composite Material - Various rolls, partly foil-packed - Partly with markings and accompanying documents Auction-ID: A1-50026-70

The assembly saw with elaborate standard equipment and a large cutting range · For mitre cuts on the left up to 45° · For sawing steel, Stainless steel and conditional aluminum profiles · Automatic cooling directly on the saw blade · Safety switch 24 V in the handle with restart lock · 38 kg total weight = easy to transport · length stop, Assembly tool incl. saw blade HSS 250x2,0x32mm, 128 T/ZT 6 +NL Optional: Machine base type 20505 (125,-EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: around 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting range at 45 degrees: around 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t Condition: never used / new (5) Auction-ID: A7-49782-555

Condition: Used equipment, sold as is Auction-ID: A1-50069-98

Volume flow: 415 l/min Operating pressure: 11 bar Reference: Option - Lot 85 Auction-ID: A7-49882-119

Condition: Used equipment, sold as is Auction-ID: A1-50069-131

-Platform extension : 900mm -No documents Auction-ID: A1-49820-24

-New -Spare and fittings Auction-ID: A1-49820-25

It is compatible with ultrasound systems: Philips HD11, HD11XE, iU22 and iE33. Condition: second-hand equipment, sold as is Auction-ID: A1-50069-182

It is compatible with ultrasound systems: Philips HD11, HD11XE, iU22 and iE33. Condition: second-hand equipment, sold as is Auction-ID: A1-50069-174

CATTANI AC200Q MONOPHTHALMIC OIL-FREE COMPRESSOR For 2-3 interventions GOOD CONDITION GOOD WORKING Auction-ID: A1-49756-172

Screw drive mounted compactor HPC1500RJ New device Weight class: 17 - 30 t Weight: 1200 KG Centrifugal force: 150 kn (15 ton) Vibration frequency: 2000 rpm Oil flow: 120-170 l/min Oil flow engine: 27 l/min Operating pressure imbalance: 150-300 bar Engine operating pressure: 45-80 bar Hose connections: 1/2 inch Base plate: 1350 x 900 x 30 mm Height: 1500 mm incl. holder Attention: A hammer line (pressureless return) is required. Scope of delivery: Operating instructions Spare parts list CE Declaration of Conformity Auction-ID: A1-50077-790