comp used for sale

Turbo Air Compressor Supplier : Solin Technologies Sdn Bhd Brand : FS Elliot Model : P300-350 • Origin Manufacture: United State of America • Compression: Two Stages Compression • Motor power: 415V, 5CHz. 3 Phase • Main motor: TEFC, 415V, 3PH, 50 Hz • Motor starter: BENSHAW Soft Starter • Cooling Method: Water Cooled Contact No: 011-64263265 [Arissa] F27

Removes oil from your compressor condensate, The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away., The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/alup-ows-18-oil-water-separator/, Type: Oil-water separator for compressor condensate, Filtration: Oil filter and activated carbon filter, Weight: 6.8 kg (empty)

Agnati / Fosber 2500 mm – Complete corrugating line Year: Various component years Working width: 2,500 mm Operator side: left Components of different years; Upgrades in 2023 Equipment: 2 Agnati S-90 single facers; 4 flute cartridges C/C/B/E Roll stands, 5 GVR splicers and preheaters Double glue unit and double backer Agnati V-HRS rotary shear Fosber TWIN 400 slitter scorer Agnati V-TREL 90 D cut-off; New Engineering downstacker Fosber Syncro V3 dry-end control system Reference: PP-61683 Further information on request.

BHS / Agnati / Fuma RHDPG – Complete corrugating line Year: Installed 2004; various component years Max. usable width: 2,400 mm; max. sheet length: 3,600 mm Listed line speed: up to 300 m/min, depending on product and individual units Installed in 2004; components of different years Equipment: BHS AF-P single facers for B/C and B/E flute Roll stands, splicers, BHS web guide, preheaters and glue unit Agnati GPA 3+1 double facer Slitter scorer and cut-off BHS stacker and Dücker outfeed Automatic SRP GK-1200 starch kitchen Reference: PP-58376 Further information on request.

Kochsiek BL66 – Complete multiwall paper-sack line Year: 2003 Paper plies: up to 3; printing colours: 4 Output: up to 400 pieces/min, depending on sack format and specification Equipment: Tuber with 3 unwinders and perforating unit Four-colour printing unit, cross and longitudinal pasting Transfer system, bottomer and palletiser Automatic rotary feeder on the bottomer Bottom-patch feeding on both sides and double valve unit Complete line for multiwall paper sacks. Format range on request. Reference: PP-53973 Further information on request.

Hello, we would have a complete production line for PV modules in Germany at a reasonable price . Consisting of the following machines and systems. 3 x Stringer TT2000 i8 M12 Halbezelle 12 BB Cell cutter + automatic handling 3D-Micromac 4 x Laminator Meyer Solution Automatic glass loading automatic transverse interconnection Mondragon Flasher Ecoprogetti 2 x Foil cutter Robust automatic frame station 40 modules with a total of 9 workers can be created per hour. If you have any questions, please feel free to contact me. There is no price. We sell by bid.

Key data: 2400 kN, 916 g/PS, 70 mm

1.0 PCS Gebr. Two Component Injection Molding Machine second aggregate is attached to the side. Manufacturer: NETSTAL Type: SYNERGY1700 - 110 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 70 mm Moulded part weight 1: 916 g/hp Screw diameter 2: 28 mm Moulded part weight 2: 59 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 2400 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side, with Robots Manufacturer: NETSTAL Type: SYNERGY 2400-900 - 230 Year of Make: 2000 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 32 mm Moulded part weight 2: 99 g/hp Equipment: Robot, manufacturer SEPRO Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot SEPRO

Key data: 1750 kN, 337 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Manufacturer: NETSTAL Type: SYNERGY 1750-900-230 Year of Make: 2012 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 1750 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Type: SYNERGY 1750-900-230 Year of Make: 2016 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot Wittmann, Year of manufacture: 2016

Key data: 1200 kN, 123 g/PS, 35 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is mounted on the side Manufacturer: NETSTAL Type: SYNERGY 1200-460 - 60 Year of Make: 2006 Clamping force: 120 tons Handlebar spacing: 460 x 460 mm Screw diameter 1: 35 mm Moulded part weight 1: 123 g/hp Screw diameter 2: 20 mm Moulded part weight 2: 31 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Compatible replacement spare parts for STORK poultry evisceration equipment. Available supply includes selected stainless steel and machined components for evisceration systems and related poultry processing applications. Parts are supplied as compatible replacement parts and are manufactured to order according to the required reference, dimensions, sample or technical specification. Typical production lead time: approximately 1 to 4 weeks, depending on part type and quantity. Please send your OEM reference number, machine model, serial number, drawing or sample for quotation and compatibility confirmation. Important notice: These are compatible replacement parts supplied by CREZTA Equipment. They are not original OEM parts unless explicitly stated. Brand names and reference numbers are mentioned only for compatibility identification. Location: Netherlands Worldwide s ...

X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.

Pull-jaw open-end coupling ball head coupling Hitch for e.g. Fendt, Hako, Holder, Kubota, Iseki, Schanzlin, Shibaura, Three-point parts, front linkage, equipment plates, hydraulic parts, hydraulic cylinders, motors and accessories and much more from stock for sale Information on request ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

BOCK HGX5/725-4 S Semi-Hermetic Refrigeration Compressor Used semi-hermetic reciprocating refrigeration compressor manufactured by BOCK Kältemaschinen in 2001. The compressor is suitable for industrial refrigeration and cooling applications. Manufacturer: BOCK Kältemaschinen Model: HGX5/725-4 S Serial number: AH18666-006 Year of manufacture: 2001 Electrical supply: 380–420 V Y/YY, 3-phase, 50 Hz Speed: 1,450 rpm at 50 Hz / 1,740 rpm at 60 Hz Displacement: 62.9 m³/h at 50 Hz / 75.5 m³/h at 60 Hz Maximum current: 37.0 A Maximum pressure: LP/HP 19/25 bar Protection: IP54 Oil: SE55 Approximate dimensions: 1,600 x 900 x 800 mm Approximate weight: 350 kg The compressor is offered in used condition with visible surface oxidation and weathering from outdoor storage. Auction-ID: A7-50995-4

Frigotecnica FT 2800 S Flake-Ice Maker Used industrial flake-ice maker with a production capacity of approximately 2,600–2,900 kg per 24 hours. The unit is designed for use with a separate refrigeration and condensing system. Manufacturer: Frigotecnica Model: FT 2800 S Production date: 05/2019 Serial number: 3411 Ice production: 2,600–2,900 kg/24 h Electrical supply: 220/380 V, 50 Hz Gearmotor: 0.11 kW Machine weight: 140 kg Approximate dimensions: 1,800 x 850 x 1,000 mm The flake-ice evaporator is offered in used condition with visible oxidation, corrosion around refrigeration connections, deteriorated pipe insulation and disconnected electrical connections. Refrigeration and condensing equipment is required for operation. Auction-ID: A7-50995-5

Used air compressor. Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-141

A complete line from weigher to shipping case, offered as one set, This automatic line weighs products, packs them in bags and places the bags in shipping cases, in one continuous process. On top sits a Yamato Dataweigh multihead weigher in stainless steel, which doses the product accurately into a GEA CFS SmartPacker SX400. This vertical form-fill-seal machine has the Quattro Seal version, for four-side sealed bags that stand up well. The SmartPacker has automatic film unwinding, integrated sealing units and a touchscreen with recipe management., After packing, a BluePrint Automation HVP system from 2003 takes care of product handling and transport, after which a Rembrandt Packaging / Lantech case packer from 2005 places the bags in cases automatically. The associated conveyor systems are included. The line suits a range of dry and free-flowing products, depending on configuration, and  ...

USED MODEL 43 HYDROVALVE COMPRESSOR Maximum pressure: 12 bar Dimensions and weight Euro pallet 1200x800xH1000mm - weight 250 kg Auction-ID: A1-50950-26

USED WORTHINGTON CREYSSENSAC RLR 4000 BX2 COMPRESSOR Year: 1999 Power: 30 kW Dimensions and weight 1500x1000H1600mm - weight 800kg Auction-ID: A1-50950-84

Screw Compressor - Kaeser CSD105 Description: Very good technical condition Operating hours: 15,000 h Power: 55 kW Max. pressure: 8 bar The device has been regularly serviced by an authorized Kaeser service center in Italy All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

High-pressure industrial piston compressor, mounted on a chassis and equipped with an electrical control cabinet. Manufacturer: Neuenhauser Kompressorenbau GmbH – NK Type: 40.2.3.02.01.10.63 Year of manufacture: 2020 Serial Number: 27/20 Effective flow rate (f.o.d.): 30 m³/h Operating pressure: 60 bar Compressor speed: 1,500 rpm Power Requirement: 13 kW Electric motor: LAMMERS, three-phase, 15 kW at 50 Hz Motor speed: 1,470 rpm at 50 Hz Motor connection: 400 V Δ / 690 V Y – 50 Hz Motor protection rating: IP55 Efficiency class: IE3 Indicated engine weight: 160 kg Visible equipment: control cabinet with Siemens LOGO! TDE, main disconnect switch, selectors and reset button Marking: CE – Made in Germany Auction-ID: A1-51172-27

Multiple CPUs PROFIBUS DP communication interfaces Industrial Ethernet Communication Processors Point-to-Point Serial Communication Processors Digital Input Modules Digital output modules Industrial I/O Modules Power Modules MPI / PROFIBUS Interfaces Ethernet TCP/IP communication according to modules Racks and backplanes included Connectors and industrial wiring included Multiple pre-wired sets Multiple components in original packaging Set sold in a lot Auction-ID: A1-51172-131

Auction-ID: A1-51172-94

High-pressure industrial piston compressor, mounted on a chassis and equipped with an electrical control cabinet. Manufacturer: Neuenhauser Kompressorenbau GmbH – NK Type: 40.2.3.02.01.10.63 Year of manufacture: 2020 Serial Number: 28/20 Effective flow rate (f.o.d.): 30 m³/h Operating pressure: 60 bar Speed: 1,500 RPM Power Requirement: 13 kW Visible equipment: electric motor, cooler, pressure gauge and control cabinet with Siemens display Marking: CE – Made in Germany Auction-ID: A1-51172-26

High-pressure compressed air handling unit , mounted on a chassis and equipped with a temperature and pressure control device. Manufacturer: BEKO TECHNOLOGIES GmbH Type: AC 020-030 +35°C HP 060 Year of Manufacture: 01/2020 Serial Number: HP030.060.0120679 Test pressure: 143 bar(g) Maximum permissible pressure: 100 bar(g) Working pressure of compressed air: 60 bar(g) Operating temperature: +20 to +35 °C Maximum volumetric flow rate at the inlet: 30 m³/h according to ISO 1217 Power supply: 230 V / 1 Ph. / PE / 50 Hz Approximate weight: 210 kg Notified Body: TÜV NORD Systems Visible equipment: STÖRK temperature controller, pressure gauges, stainless steel piping and two pressure vessels Marking: CE 0045 Visible pressure vessels: Type: HD-B147.100 Serial numbers: 1470120470 and 1470120471 Unit volume: 7.7 liters Test pres ...

Set of variable frequency drives and industrial automation components Control and power modules for electric motors and servo motors Multiple single and dual motor modules Control modules with communication interfaces Frequency inverters with digital operator interfaces Power and power modules Three-phase network filters Network reactances and selfs Interfaces and control adapters Industrial Communication Connections Power supplies and electrical accessories Industrial wiring and connector elements Set including assembled components and packaged parts Quantity: large set on pallet Auction-ID: A1-51172-128

Air consumption: 42,83 m³/min Motor output: 250 kW Overall size: 4000 x 2100 x 2500 mm 0: min. 4 bar 0: max. 13,5 bar Weight: 20.000 kg Dimensions (LxWxH): 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 - El. Steam trap BEKO 14 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Important set of industrial automation components Multiple CPUs for PLCs 24 V DC digital input modules 24 V DC digital output modules Analog input and output modules Industrial Communication Modules PROFIBUS DP communication interfaces Connection Modules & Couplers Industrial Power Supplies Numerous remote I/O modules Modules with up to 32 digital inputs Modules up to 32 digital outputs 24 V DC / 0.5 A Profile and rack mounted assemblies Numerous connectors and wiring included Multiple pre-wired sets Set sold on pallet Auction-ID: A1-51172-129

Tool trolley complete with all tools as in the photo, chrome vanadium key quality, never used and packed in its original packaging Overall dimensions: 800 x 600 x 800 mm Weight: 70 kg Auction-ID: A7-50799-280

Set of 10 tool trolleys, complete with all tools as in the photo, chrome vanadium key quality, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1800 mm Weight: 790 kg Auction-ID: A7-50798-153

Set of 10 tool trolleys, complete with all tools as in the photo, chrome vanadium key quality, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1800 mm Weight: 790 kg Auction-ID: A7-50799-395

Full contents of the 9 pallets Cases included Stored and taken away on 2 pallets Auction-ID: A1-51213-36

Large batch of electrical and safety equipment (several bins and cartons). Main content: Schmersal safety switches (ZS 75...) Guardmaster Atlas 3 safety switches and other Rotacom HS-2-EX safety switches ABB circuit breakers and contactors (SACE ISOmax, etc.) Miscellaneous relays and modules (Schneider, etc.) Control boxes and accessories Potentiometers and trimmers Pedals and control devices. New and used equipment in good condition (many still packed). - Several bins and cartons Auction-ID: A1-51157-40

Zelfir screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 300 liters. Never used Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50798-349

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50797-6

Set of 10 tool trolleys, complete with all tools as in the photo, chrome vanadium key quality, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1000 mm Weight: 700 kg Auction-ID: A7-50798-52

Set of 5 tool trolleys, complete with all tools as in the picture, chrome vanadium quality keys, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1000 mm Weight: 350 kg Auction-ID: A7-50799-394

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50797-14

COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with fuel consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-50798-103

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50797-13

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50797-1

Set of 5 tool trolleys, complete with all tools as in the picture, chrome vanadium quality keys, \"in its original state\" packed in its original packaging Overall dimensions: 1500 x 1200 x 1000 mm Weight: 350 kg Auction-ID: A7-50798-200

DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50797-7

COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control. Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-50799-348

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, 4-cylinder water-cooled Ricardo engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-50798-12

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50798-5

Tool trolley complete with all the tools as in the photo, chrome vanadium key quality, never used and packed in its original packaging Overall dimensions: 800 x 600 x 800 mm Weight: 70 kg Auction-ID: A7-50798-162

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50797-9

0-10 mm precision dial gauge with 0.01 mm accuracy, complete with magnetic base. This set is designed for extremely precise checking of the geometric shapes of various components and ensuring their correct placement within other components. Auction-ID: A7-50799-53