comp used for sale

Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...

An Atlas Copco screw compressor is being sold. Bj 2022 Operating hours and technical data in the picture Plant has always been serviced and is sold due to cessation of operations If required, the pipes for the air supply can be purchased additionally. Machine has to be dismantled by yourself. The system is handed over by us without electricity. Article location Nuremberg All information without guarantee Available from June 2026 Inspection and test run is possible Sale only to tradespeople Price 8000 Euro net plus VAT Loading facilities available

Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts

Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  Operating Pressure: 7–8.5 bar Air Capacity: 24.1 m³/min Power Supply: 132 kW Weight: 4,075 kg Condition: Excellent, annual maintenance completed August 2025 Optional equipment: Atlas Copco air dryer available Status: Installed and connected, fully functional

Key data: 3

Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

Compact stations with oil transformer 1600KVA, was recently still in operation for wind turbines.

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

Unused James Walker spare seals (.jameswalker.biz). For details of the seals, see photos., Type of Machine: Spare parts processing equipment

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.

Complete PET Bottle Filling Line for Carbonated Soft Drinks Manufacturer: SIPA / PROCOMAC Year of Manufacture: 2009 Location: Germany Availability: Beginning October 2026 The line is currently in operation and can be inspected during production. Technical Details: Capacity: Approx. 12,500 bottles per hour Bottle Sizes: 500 ml, 750 ml, 1,500 ml Neck Finish: PCO 28 / 1881 750 ml additionally with sport cap (PCO 1881) Equipment & Features: 1. Blowing machine SIPA SFR 8 with 8 cavities incl. preform feeding system, incl. chiller but without preform unloading device and without high pressure compressor 2. Air conveyor GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 with 50 rinsing stations, 70 filling valves and 12head plastic screw capper, incl. complete clain room around the machine type ISO 5”, incl. two sorting units, incl. bottle drying station after the filler, incl. ...

2 units semi-hermetic reciprocating compressors by DWM Copeland, model D6SJ1-400X-AWM/D. Technical data: 6-cylinder reciprocating compressor Displacement: approx. 127 m³/h Speed: 1450 rpm at 50 Hz Voltage: 380–420 V (50 Hz) / 440–480 V (60 Hz) Protection class: IP54 Max. operating pressure: 28 / 22.5 bar (H/L) Year of manufacture: 02/2003 Manufacturer: Copeland (Made in Belgium) Condition: Used, removed from system. Signs of storage and use present. Functional test not performed. Sale in current condition, without warranty or guarantee.

Alteco 1000 Liter tank Pressure vessel 11 bar

Atlas-Copco 1500 liter tank pressure vessel

Compressor: 13 bar Dryer Atlas-Copco FD220 14 bar Volume flow rate: 8.52 m3/min Power imput: 50 kW

We are selling the following used 12 m3 press containers and skip compactors .All units are suitable for waste compaction including waste incineration, cardboard, Sagex, and film materials. Unit 1: Franz Dreier Press Container without Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: 2019 - Volume: 12 m3 - Tipping device: No - Supply voltage: 380V 3N 50Hz - Condition: Used Unit 2: Franz Dreier Press Container with Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: unkown - Volume: 12 m3 - Tipping device: Yes - Condition: Used Unit 3: Franz Dreier Press Container without Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: 2012 - Volume: 12 m3 - Tipping device: No - Condition: Used Unit 4: Franz Dreier Press Container with Tipping Device - Manufacturer: Franz Dreier - Year of manufacture: 2012 - Volume: 12 m3 - Tipping device: Yes - C ...

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 1st stage/filter element 3075 X -Content: 20 liters -Operating pressure: 16 bar -Connection: DN 80 -Price per piece - Quantity: 2 pieces -Dimensions: 380/300/H1170 mm -Weight: 72kg

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 2nd stage / Filter element 3075 A -Contents: 20 liters -Operating overpressure: 16 bar -Connection: DN 80 -Price: per piece -Quantity: 2 pcs. -Dimensions: 380/300/H1170 mm -Weight: 72 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor -Handover: in its current condition as inspected -Power outlet: Damage, see photos -Manufacturer: Frigopol, separating hood compressor -Type: D 60300 -Power: 2.2 kW / 1450 rpm -Voltage: 220-240/380-420 V -Dimensions: 400/400/H500 mm -Weight: 71 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h -Max. operating pressure: 24.5 bar -Number: 2x cooling units available -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor -Manufacturer: Frigopol, separating hood compressor -Type: D 60300 -Power: 2.2 kW / 1440 rpm -Voltage: 380/660 V -Number: 4x cooling units available -Price: per piece -Dimensions: 400/400/H455 mm -Weight: 68 kg/unit

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Vibration damper, compensator, damper, -Shock absorber: unused -Installation: on pumps, compressors, valves -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel -Clear diameter: 400 mm -Width: 370 mm -Quantity: 1x damper available -Price: per piece -Weight: 30 kg/piece

Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Furniture rollers, furniture dog plastic rollers, furniture transport trolleys, transport rollers, platform trolleys, transport trolley wheels, heavy duty trolleys, table trolleys, assembly trolleys, complete wheels, tires with rims, -Complete wheel: tires, unused -Tire size: 13x5.00-6 -Rim: with bearing inner Ø 15 mm -Material rim: plastic -Quantity: 40 pieces -Price per piece -Dimensions: Ø 310 x 105 mm -Weight: 2kg/piece

Furniture rollers, furniture dog plastic castors, furniture transport trolleys, transport rollers, platform trolleys, transport trolley wheels, heavy-duty trolleys, table trolleys, assembly trolleys, complete wheels, tires with rims, -Manufacturer: Kettler Segers complete bike, unused -Tires: Kettler Duro HFR 3.00-4 -Rim: without bearing, inner Ø 26 mm -Quantity: 22 pieces -Price: per piece -Dimensions: Ø 253 x 80 mm -Weight: 1 kg/piece

Transport trolleys, platform trolleys, transport trolleys, wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers -Manufacturer: Hota complete tire for strollers / bicycle trailers / scooters unused -Tires: 12 1/2 x 2 1/4 (57-203) -Rim: without bearings, inside O 25 mm -Quantity: 23 pieces -Price per piece -Weight: 1 kg / piece

Transport trolleys, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers, stroller wheels -Manufacturer: Innova Apse Complete wheel tire with brake for strollers/bicycle trailers/scooters, unused -Tires: 12 1/2 x 2 1/4 (57-203) -Brake: Apse 60 Brake -Quantity: 92 pieces -Price: per piece -Dimensions: Ø 310 x 158 mm -Weight: 1.3 kg/piece

Transport trolleys, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers, stroller wheels -Manufacturer: Innova Apse complete wheel tire with brake for stroller/bicycle trailer/scooter unused -Tires: 12 1/2 x 2 1/4 (57-203) -Brake: Apse 60 Brake -Quantity: 72 pieces -Price: per piece -Dimensions total: Ø 310 x 145 mm -Weight: 1.3 kg/piece

Transport trolleys, platform trolleys, transport trolleys, wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailer tires, stroller wheels -Complete wheel: tires for strollers / bicycle trailers ... unused -Tire: outside Ø 250 mm -Tread surface: solid rubber -Rim: inside Ø 13 mm -Quantity: 129 pieces -Price per piece -Minimum order: 4 piece -Dimension: Ø 250 x 70 mm -Weight: 0.7kg / piece

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Type: Elmo-G 2BH1 603-1AC11-Z -Drive: 2.2 kW -Speed: 2860 rpm -Connection input: Ø 38 mm -Connection output: Ø 50 mm -Dimensions: 380/380/H380 mm -Weight: 28 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, AS-i compact module -Manufacturer: Siemens, AS-Interface compact module ovp -Type: 3RK1400-1DQ03-OAA3 -Cardboard dimensions: 165/75/H40 mm -Weight: 0.2 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, AS-i compact module -Manufacturer: Siemens, AS-Interface compact module ovp -Type: 3RK1408-OCT01-OCAO -Cardboard dimensions: 175/75/H75 mm -Weight: 0.5 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, refrigeration machine, refrigeration unit -Manufacturer: Dorin, refrigeration compressor cooling unit complete -Type: UA - K470CS-01 -Power: 3.48 kW / 1450 rpm -Volume flow: 23.37m³/h -Max.operating pressure: 30.5 bar -Number: 2x cooling unit available -Price per piece -Total dimensions: 1900/1000/H940 mm -Weight: 304 kg/pc.

Vibration damper, compensator, damper, expansion compensator, expansion piece -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused -Size: DN 32 PN 16 -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel 1.4541 -Number: 13x dampers available -Price: per piece -Dimensions: Ø 53 x186 mm -Weight: 0.5 kg/piece

Vibration damper, compensator, damper, expansion compensator, expansion piece -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused -Size: DN 50 PN 16 -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel 1.4541 -Number: 28x dampers available -Price: per piece -Dimensions: Ø 79 x 206 mm -Weight: 0.9 kg/piece

Vibration damper, compensator, damper, expansion compensator, expansion piece -Vibration damper: steel expansion compensator, unused -Type: unfortunately no type designation -Size: DN 50 PN 16 -Material: stainless steel -Number: 11x dampers available -Price: per piece -Dimensions: Ø 75 x 203 mm -Weight: 0.7 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, short-stroke cylinders, flat cylinders -Manufacturer: Festo, compact cylinder worth type designation -Stroke: 10mm -Piston: Ø 40 mm -Piston rod: Ø 8 mm / M4 x 0.7 -Number: 2x cylinder available -Price per piece -Dimension: 55/28/H34 mm -Weight 0.1 kg/pc.

Vibration damper, compensator, damper, expansion compensator, expansion joint, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra Axial Compensator, unused -Type: ABG 01.0350.195.0 -Nominal diameter: DN 350 / Length 360 -Material: Bellows V4A stainless steel -Bolt circle: Ø 445 / 22 mm -Dimensions: Ø 490 x 365 mm -Weight: 27 kg

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: SB Broneske, compensator unused -Type: SBF25.100 -Nominal diameter: Ø 270 mm -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Dimensions: Ø 375 x 260 mm -Weight: 15 kg

Compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Wellflex, compensator unused -Type: PN 2.5 DN 250 -Nominal diameter: DN 250 Ø 273 mm / length 285 -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Number: 4x dampers available -Price: per piece -Dimensions: Ø 375 x 280 mm -Weight: 18.1 kg/piece

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from electric pallet truck ECE 118 -Drive motor: 24 VDC / 1.6 kW -Individual components: see photos -Number: 4x drawbars available -Sale/Price: per piece -Dimensions: 1530/480/H290 mm -Weight: 87 kg/unit

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar completely from electric pallet truck ECE 20 year construction 2000/2001 -Individual components: see photos -Number: 2x drawbar available, 1x mod. 2000 / 1x mod. 2001 -Delivery/Price: complete per piece -Dimensions: 860/500/H200 mm -Weight: 29 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from pedestrian stacker type EJE-KmS 16G-24-140-56 -Drive motor: 24 VDC / 1.5 kW -Individual components: see photos -Number: 1x drawbar available -Delivery/Price: per piece -Dimensions: 1585/510/H265 mm -Weight: 82 kg/pc.

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar completely from electric pallet truck / pedestrian stacker -Type: ECE or similar, unfortunately no exact type designation -Individual components: see photos -Delivery/price: complete -Dimensions: 860/370/H200 mm -Weight: 18 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Handover: in the current condition as seen -Damage: connection cable, drive wheel see photos -Manufacturer: Deca, drawbar complete with drive from pedestrian stacker F2/10/27 -Drive motor: 12V 0.8KW -Individual components: see photos -Dimensions: 1290/380/H300 mm -Weight: 37 kg

pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. -Speed: 175 rpm -Dimensions: 790/260/H110 mm -Weight: 11 kg