133,551 used machines on RESALE, but how to find them? Machine Search
Kompressor / Compressor Gardner Denver SKG-275.2V.02 (60) Seitenkanalverdichter Baujahr / Year 2007 - SN. 2750748 Luftstrom / Capacity 100 m3/h SI 1,5/1,8 kW / 2800/3400min Überholt 2014 / Overhauld 2014
Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW Abmessungen / Dimensions 200 x 80 x 150 cm Gewicht / Weight 730 kg
Kompressor / Compressor Gardner Denver KLT 15 (03) Baujahr / Year 2007- SN. 2740657 Luftstrom / Capacity 15/18 m3/h S1 0,75/0,9 kW / 1400/1710 /min DAS IST EIN TEST
Polyester fiber production line Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. + In 2019 instaled, elevators and a screw conveyor for ...
power capacity: 4 kW feed pressure: 10 bar liter capacity: 490 Lieter / min Receiver capacity: 350 l motor speed: 1500 U/min voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m • 2 piston-compressor with tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.
Screw compressor, Brand: Almig, Motor speed: 500-4680, Volume flow: 0.61-6.59 m3/min, End pressure max.: 5-13bar, Motor power: 30kW, incl. refrigeration dryer, Brand: Boge, Type DS80-2; further details see photos of the nameplate
Nominal volume flow: 1008 m3/h, Refrigerant: R407C, Compressed air PS: 14bar; further details see photos of the nameplate
Key data: 3200 kN, 359 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.
Compressor control for compressed air generation, independent of compressors, operable up to 32 compressors, to increase efficiency and minimize wear and increase operational safety, Type: Master-4; further details see photos
Free shipping within Germany Auction-ID: A1-49308-199
Ecoair C10 screw compressor, replacement machine
Key data: 132 , 40 , 750
Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours
Debus DDS 118 / 5/ 23 Chips Industrial Vacuum Cleaner 6 bar 4.6 m³/min Original price 4604,- € Manufacturer: Debus Model No.: DDS 118 Full Name: DDS 118/5/23 Chips Year of Make: 2016 Fabr.-Nr.: 278 Operating pressure: 6 bar Suction power: 4.6 m³/min Air requirement: 1.3 m³/min Weight: approx. 30 kg Capacity: approx. 40 litres Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosts. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!
Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used
Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used
Hofftech 12V Air Compressor 250 psi Auction-ID: A1-40897-44
Unused; lenght 2900mm; wide 219mm; Thickness ca 26mm Auction-ID: A1-49902-57
Unused; length 2900mm; wide 194mm; Thickness ca 25mm Auction-ID: A1-49902-75
Starts up at takeaway HPM001-301 Auction-ID: A3-46156-20561
Double diaphragm pump with air drive DEPA type DH40-FA-ZRTDreactive air diaphragm pump, double pumpSeries No.: B1802498 year of construction 09.05.2018Temperature: max. 130CBau size: 40Grain size: max. 16 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/8Suction connection: 1 1/2Pressure connection: 1 1/2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE- Balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H: 370 x
Unused; length 2900mm; wide 194mm; Thickness ca 25mm Auction-ID: A1-49902-56
Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRTDoduct diaphragm pump, double pumpSeries No.: B1600416 year of construction 26.01.2016Temperature: max. 130CBausize: 50Grain size: max. 18 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/4Suction connection: 2Pressure connection: 2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE Composite balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H 550 x 350 x
Unused; lenght 2900mm; wide 219mm; Thickness ca 26mm Auction-ID: A1-49902-59
Diesel - Forklift, Compact Forklift MORA Type M80CSFabr. No. 20087 Year of construction 2006Nominal load capacity 8 ton. Lifting height 3800 mmFork length 1800 mmFork carriage width 1460 mmOverall height 3030 mmTotal width 1460 mmTotal length without forks 3350 mmWeight 12740 kg- Duplex mast with 1950 mm free lift- 4 cylinders PERKINS diesel engine- Fully enclosed cab with heating- Electro-hydraulic tilting device for the cab- Hydraulic auxiliary steering- 2 front work lights, 1 piece
Unused; length 2900mm; wide 194mm; Thickness ca 25mm Auction-ID: A1-49902-55
Compressed air toggle press BURGER type D04Fabr. No. 4497 Year of construction approx. 1972Compressive force max. 6 ton. Projection 150 mmPlunger stroke 39 mmTable size 340 x 270 mmThrough-hole opening 46 mmInstallation height max. 160 mmTool holder 25 mmPlunger plate 90 mmPneumatic operating pressure 5 barMains connection 220 V 50 Hz- Pressure regulator for press force adjustment- Lifting height adjustment 7, 21, 40 mm- Electric foot switch- Table height adjustmentSpace requirement L x W x H 700 x 500 x 1300 mmWeight
Single-phase connection (plug 230V) Auction-ID: A3-46156-12
Unused; lenght 2900mm; wide 219mm; Thickness 26mm Auction-ID: A1-49902-64
Compressed Air Adsorption Dryer, Activated Carbon Adsorber with Secondary Filter BOGE Type DAZ 5-2For Particularly Dry AirFabr. No. 38315449 year of construction 2013Volume flow max. 250 litres/min. = 15 m³/hOperating pressure max. 16 barConnection thread G 1/4? Mains connection 230 volts, 50 Hz- pre- and post-olderSpace requirements L x W x H 400 x 210 x 580 mmWeight 15 kgGood condition; used
Starts up at takeaway HPM001_404 Auction-ID: A3-46156-20559
Starts up at takeaway HPM001-403 Auction-ID: A3-46156-20560
Unused; lenght 2900mm; wide 219mm; Thickness 26mm Auction-ID: A1-49902-63
Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg
Unused; lenght 2900mm; wide 219mm; Thickness ca 26mm Auction-ID: A1-49902-60
with a 200 l compressor and container Auction-ID: A1-49964-26
Specifications: - Compaction pressure 10 bar - Volume flow 530 l/min - Power 4.0 kW - Current consumption 8 A - Voltage 400V, 50 Hz, 3~ - Speed 2,900 rpm
Stored while working. Not tested. Must be checked before use. Auction-ID: A3-46156-17178
maximum number of results exceeded
please refine your search
10 € 
