comp used for sale

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 165/40/H40 mm -Weight: kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 10 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 68/68/H68 mm -Weight: 0.65 kg/piece

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Compressor Bitzer Type: 6G-30.2Y Volume: 126.8 m3/h Cooling capacity for R404A: 88 kW at -5°C/40°C, 72 kW at -10°C/40°C, 38 kW at -25°C/40°C Items in magazine: 2 Reference number: S183 Condition: Used in good condition Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Fabr. No.: 181308 Equipment / Additional information: Flow rate: 40 m3 / h Compression end pressure: 0.6 bar Motor power: 1.5 kW / 1400 U/min.

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 10 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 80/68/H68 mm -Weight: 0.65 kg/piece

Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...

Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer

Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 30 mm -Piston diameter: 32 mm -Piston rod: Ø 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 80/50/H50 mm -Weight: 0.4 kg/piece

Key data: 75 , 10 , 691

Parameters: -Max. pressure 10 bar - capacity 691.2 m3/h - power 75 kW - Built-in dehumidifier - PREVENTIVE MAINTNANCE support in 2019.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 10 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 68/87/H87 mm -Weight: 1.2 kg/piece

Now we have 2 spunlace lines, One manufactured by TSUSCHLER in 2013,ww: 3500mm,Another one manufactured by ANDRITZ in 2016 ww: 2750mm. If you interest in these lines, do not heisitate to contact us.Thanks.

Verdichter, Compressor, Copeland Scroll ZR 40 K3E-TFD-522 Displacement: 9.94m3/h 2900 Red/min. Power, Amp.7 Year: New Refrigerant 134a, and others

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 50 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Dimensions: 108/87/H87 mm -Weight: 1.65 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-50-25-PA -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Stroke: 25 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimensions: 78/72/H72 mm -Weight: 0.7 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-80-60-APA -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Stroke: 60 mm -Max. Pressure: 10 bar -Dimensions: 140/105/H155 mm -Weight: 2.3 kg

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

Kaeser SK26 Air compressor Serial: 264957 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Computer, board computer, organizer -Manufacturer: CV90-52689-12 -Type: CV90-52689-12 -Number: 2x organizers available -Price: per piece -Weight: 0.8 kg

Complete unit, compact controller, touchscreen, operator panel, display, PLC, Simatic panel PC -Manufacturer: Siemens -Type: SIMATIC C7-633 DP 6ES7633-2BF02-0AE3 -Dimensions: 240/205/H75 mm -Weight: 1.6 kg

Computer monitor, control unit, control unit, keyboard, screen, control -Manufacturer: INONET -Type: Radiance-15 -Dimensions: 400/300/H45 mm -Weight: 3.5 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg

Press capacity: max. 60 t Stroke of the punch: 125 mm Filling height: max. 110 mm Motor: 15 kW Approx: 1650x1801x3390 mm Net weight: 5800 kg

Fluidair RPK47 Air compressor Serial: 41449 Rotary air compressor, working pressure 100PSI, Discharge pressure 8Bar, with fluidair rotastar control, 3Ph

Here we offer a strong Schneider screw compressor for sale. A 14 kW variable speed screw with refrigerant dryer and large 500ltr. Kettle. Operating hours approx. 14789, load hours 14348.

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

Compulsory mixer, agitator, mixer, mixing tool -wherever electrical mixers are not permitted -Nominal consumption: watts -Speed: rpm -with: stirring stick -Number: 2x agitators available -Price: per piece -Dimensions: 470/330/H900 mm -Weight: 14 kg

Compulsory mixer, agitator, mixer, mixing tool, stirrer -wherever electrical mixers are not permitted -Nominal consumption: watts -Speed: rpm -without: stir stick -Number: 3x stirring devices available -Price: per piece -Dimensions: 450/300/H460 mm -Weight: 14 kg

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg

Compressed air dryer, refrigeration dryer -Max. Pressure: 16 bar -Operating voltage: 380 V -Dimensions: 1050/950/H1770 mm -Weight: 556 kg

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg

2x Bitzer Compressor CO² 4ESL-9K-40S (piece 1800) 2x Bitzer Compressor 4EHC-6K-40S (piece 1200) very good condition Please take data from the pictures

PLC control, compact device -Manufacturer: SIEMENS -Type: Simatic S5-95U 6ES5 095-8MC01 -Number: 1 module available -Dimensions: 145/135/H140 mm -Weight: 1.34 kg

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Hydrovane compressor with FriulAir air dryer and flex. Compressed air pipes Brand : Gardner Denver Year of construction: 2015 Assets: 7.5 KW Rpm; 1.465 Max. pressure: 11 Bar FriulAir: (built in 2015) Type: ACT12/AC Air flow: Nom. 1,200 l/min.

volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air gun, 2-component gun, multi-function gun, cartridge gun The TS460 XH compressed air gun is designed for 490 ml side-by-side cartridges. It is suitable for applying two-component adhesives and sealants. -for 2K adhesives and 2K sealants -Propulsion: via compressed air -Weight: 2.3 kg

2 x Bock compressor in very good condition. Please refer to the type debt for data

- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor -Volume flow: 182.7 m³/h -Compressor final pressure: 28 bar -Speed: 1450 rpm -Voltage: 380/415 V 3PH -Current strength: 105/96 A -Frequency: 50 Hz -Weight: 490 kg

SPECIFICATIONS: Air flow rate L/min: 6000 Operating pressure bar: 8 (variable max 13) Installed power KW: 30.0 Complete with inverter Operating hours: approx. 8000

Used Tetra Therm Aseptic VTIS Plant Complete aseptic processing system designed for the sterilization and treatment of liquid dairy products. This Tetra Therm Aseptic VTIS plant is suitable for processing UHT milk and other high-viscosity products, offering reliable and efficient performance for industrial dairy production. Line Configuration The plant consists of the following main components: - Used Tetra Pak Sterilizer / UHT System - Used Tetra Pak Homogenizer - Tetra Pak Sterilizer / UHT - High-performance aseptic sterilization system for continuous processing of dairy products. Technical Details - Manufacturer: Tetra Pak - Model: Tetra Therm Aseptic VTIS F-12 - Year of Manufacture: 2010 - Capacity: 8,000 l/h - Running Hours: 15,284 Suitable Products - White UHT milk - Cream - High-viscosity dairy products Condition - Very good used condition Tetra P ...

Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Compressed air tank galvanized -Content: approx. 25 l -Dimensions: 630/470/H302 mm -Weight: 14.2 kg

PLC control, central module, memory, CPU, central device, central unit, compact device -Manufacturer: Siemens, compact device Simatic S5 with memory card -Type: 6ES5 095-8MC01 -Quantity: 1 piece available -Dimensions: 130/90/H135 mm -Weight: 1.4 kg