129,514 used machines on RESALE, but how to find them? Machine Search
Used pastry line RONDO, type: Smartline + Compactline - Satellite head at the front -Role -Calibrator - Compactline - Total length: 15 meters Visits and test runs are possible by arrangement.
table-size: 500 x 380 mm Overall size: 1400 x 1500 x 1800 mm weight of the machine ca.: 500 kg round table: 3-jaw chuck: diameter: 125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 190 kg,
Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.
Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I
turning length: 850 mm turning diameter: 400 mm swing diameter over bed slide: 245 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 260 mm spindle taper: DIN 55029 D 1-5 taper in tailstock: 3 MK quill travel: 120 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1255 kg range L-W-H: 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 cente ...
Height=1.97 m, Overall length= 1.1 m, Overall width= 7.3 m, Net weight= 2600 kg,
A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.
A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...
Bread loaf forming line composed of: -Weigher / divider / girder: For all types of dough (year 2007) Automatic lubrication system. Adjustable weight. from 60 to 600 grs. Speed variator. 40 kg hopper for dough, made of stainless steel and non-stick material. Flour sifter. Digital parts count. -400-basket resting chamber, manufactured in 2004. Adjustable time. -Bread loaf former, made in 2004 tape width: 600mm
GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.
CompaCLEAN III, For customers who prefer traditional dishwashers, CompaCLEAN offers the type of cleaning many are accustomed to while minimizing the shadow effect thanks to its unique linear tangent spray technology. PCBs are loaded into a typical kitchen dishwasher like plates., Application: Standard SMD assemblies., ���Capacity: Medium volume, ���Contamination solubility: slightly too moderate, To achieve sufficient cleaning quality and minimal cross-contamination, perfect filtration is required. Each PBT cleaning machine uses an independent closed circuit with a dedicated pump and filter system for each individual process step., CompaCLEAN can be easily configured to clean any size and shape of part by selecting different clamping solutions for larger or smaller PCBAs and using a single or double basket setup., Subject to prior sale, changes and errors!, Application: Stand ...
Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...
4-Wellen Hobelautomat SCM COMPACT 23 Gebraucht Maschine 4 spindeln Betriebszustand: exzellent CE-Zeichen: Ja volt. 380/50 mit werkzeug: Ja . No.04 Werkzeuge mit austauschbar Einwegmessern Kompositionsmaschine : 1st Spindel: Hobel. Motorleistung PS 5.5 (Kw 4) 2° Spindel und 3° Spindel : rechts vertikal und links vertical . Motorleistung PS 7.5 (Kw 5.5) 4th Spindel: Dickenhobel. Motorleistung PS 5.5 (Kw 4) Technische Details : 2-Gang-Vorschub. Motorleistung PS 1.3/1.7 (Kw 1/1.3) wellendrehzahl U/min 6000 Vorschubgeschwindigkeit : 6 / 12 mt./min max. nutzbare Arbeitsbreite mm. 230 max. nutzbare Arbeitshöhe mm. 125 wellendurchmesser mm.40 einlasslänge mm. 2300 SchmierSystem elektrische Höhenverstellung. motorleistung: 0.5 HP (0.37 kW) Gewicht kg. 1600 Bedienungsanleitung CE-zertifizierung
A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.
X-ray accident investigation workstation available for sale. The Bucky workstation shown in the photos is included. The generator and the two measuring chambers in the table and wall-mounted grid stand are not included. Included components: - Ceiling-mounted tripod with X-ray tube, depth stop, and control arm - X-ray table - X-ray stand (lung stand) Additional items for sale: - 9 mobile stands (including stands for Philips MP 40 monitors with X3) - 5 boxes, each containing 2 gas cylinder holders for Evita V300/V500/V600 ventilators - 1 bed scale (Seca) (as new) - 1 wheelchair scale (Seca) (as new) - 1 Manujet III (VBM Medizintechnik) - 1 Microspeed uni (Aesculap) - 1 TruLight 1000 examination light (Trumpf) (very good condition) - 1 hemodynamic monitor PICCO - 1 Leon Plus anesthesia machine Find more here - / Contact us at -
new
New mobile dental unit reversed including with new demountable chair type DENTA-COMP PREMIUM MAKER BPR DENTAL MOBILILLITY BPR SWISS Perfect machinery international whatsapp +31 653549259 The Netherland whatsapp +34 682511830 Spain
Splitter Compact 30t Metre log splitter Motor 5.5KW 400V 50HZ Splitting force max. 30t Max. split material diameter 400 mm Torsion-resistant and particularly tilt-resistant construction with log lifter that erects the heavy trunks Swivelling table for particularly fast work Splits hardwood and softwood up to 1100 mm in length effortlessly and reliably G&SC-5905510902
General SKU437W1436 LocationBarneveld MakeAgilent Type1100/1200 series Year of constructionunknown Specified Features - Miscellaneous Motor230 volt Information Floor space0,60x0,60 m CEcheck Total height1,0 m Weight50 kg Extra SpecificationsWith Thermostar, FC/ALS therm, Degasser, Detector, :MiscellaneousAgilent TechnologiesMiscellaneous > MiscellaneousBrand > Agilent Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU299X419 LocationBarneveld MakeCoperion Werner & Pfleiderer GmbH Stuttgart TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Counter rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 Information Year of construction2004 With switchgearcheck (as is) Weight± 22.000 kg Extra SpecificationsComplete line with side-feeder, discharge screw and partially control cabinet info compounder: Krupp Werner &: Pfleidere GmbH typ: D315 EXT Single screw screw dia: 250 mm screw lengte:1500 mm. screw van be heated L/D: ...
Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning
with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10
Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible.
Cool Compact Pizza Cooling Table 2-door pizza counter with GN attachment mobile on wheels Granite slab +2°C +12°C Metrics WxDxH 107 x 70 x 113 cm Beleg stations - new and used - can be found in our shop! International shipping costs on request!
Dimensions (L/W/H): 0x0x0 mm Weight: 1600 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x1170x2300 mm Weight: 650 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 720x1000x1900 mm Weight: 300 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filling and packaging line for spirits in glass bottles (0.2 L, 0.5 L, 0.7 L, 1.0 L bottles with PP31.5), Pos.1:, 1 piece vacuum filler Seitz Compakta incl. vacuum, Solomaschine with 15 filling valves, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.2:, 1 piece Alcoa aluminum screw cap, Solomaschine mit einem Verschließkopf, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.3:, 1 piece TLG cap setter and BEER, Shrink wrap machine – never in operation, Pos.4:, 1 piece bottle handling system including accumulation table, Good condition, Pos.5:, 1 piece labeling machine KOSME for self-adhesive labels, with four bottle disc for abdomen, chest and, Back label, Year of construction: 2007, Very good condition, Pos.6:, 1 piece carton sealing machine Brand: Strapex /Switzerland, Type: Locktape 50, Yea ...
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
Key data: 30 , 16 , 4
Screw compressor Weight: approx. 750Kg Volume flow: 4.88 m³ Suction pressure: 1.0 bar Speed: 3000 1/min Motor power: 30 kW
Item condition: in working order Availability: from 31.12.2025 Location: near Hamelin Dismantling: by buyer Number of ovens: 1
Ultrasonic cleaning system for anilox rollers and other parts. By means of a cleaning fluid and ultrasound, the rotating anilox roller is cleaned.
A vertical panel saw Striebig is available. Cutting length: 4600mm, cutting width: 2070mm, cutting thickness: 60mm, vertical cutting position spacing: 1000mm, saw blade diameter: 250mm, motor power: 3kW, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 5750mm/1500mm/2850mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.
For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:
CONTROLS CNC controls WORKING RANGE -CUBIC- X-axis travel: 250 mm Y-axis travel: 160 mm Z-axis travel: 250 mm TECHNICAL SPECIFICATION Table-size : 480 mm Table-size : 330 mm Adjustment of x-axis: 250 mm Adjustment of y-axis: 160 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm space requirements -front/back-: 1200 mm total height: 2500 mm total weight approx.: 1000 kg Equipment: -Agietron Compact 1 30A/C-axis / DAI 1-P -AGIE Fuzzytron -14 color screen -Fire extinguishing system -3-compartment electrode magazine -Micro-machining variant -lots of accessories
used
Available immediately from operational European factory. Equipment professionally maintained and in excellent technical condition. FLAT KNITTING MACHINES - Steiger Antares 3.130SC Freegauge, E14 (E7/E14), Switzerland Quantity: 1 unit Year: 2019 - Steiger Antares 3.130 SC, E14, Switzerland Quantity: 5 units Year: 2019 - Steiger Antares 3.130 SC Fully Fashion, E16, Switzerland Quantity: 1 unit Year: 2019 - Stoll ADF 530-32 Multi Gauge Quantity: 1 unit Year: 2018 SOFTWARE Programming Software Model+ by Steiger, Switzerland Quantity: 1 unit Year: 2019 LINKING MACHINES - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2019 - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2018 - Exacta Ultravision Stoptronic Italy E22 Quantity: 4 units Year: 2019 SEWING MACHINES - Exacta Cupseamer Quantity: 1 unit Year: 2019 - Durkopp Adler 281-140342-03, Single Needle ...
For single and multiple containers with straight infeed Running from left to right For PP films Output max. 22 containers/min. Infeed width 100-200 mm Infeed length 50-350 mm Infeed height 30\endash150 mm Erecting device for 90° rotation of folding cartons Stacking station Automatic film change from working roll to storage roll using film splicer Camera/track & trace system for serialisation and aggregation with PLM direct software ZEBRA ZE500 label printer with label applicator and PCE camera Handheld scanner Schneider Electronics PacDrive LMC/Lexium LXM62 P/LXM 62 D control system 15.6 HMI with tangius 4.0 visualisation software User management Format management Audit trail Ethernet connection Folding box formats used Infeed (a x b x h) 55 x 26 x 110/160/185 mm Container dimensions used (IW x IL x IH) 1 ...
4 spindles moulder SCM mod. COMPACT 23K Composition: - 1st bottom horizontal spindle - 2nd vertical spindle right - 3rd vertical spindle left - 4th horizontal top - Working width mm. 230 mm. - Infeed table 2000 mm. - Year 2000 - CE rules
This SPINNER TC46-COMPACT was manufactured in 1999. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their turning capabilities. Contact us for more information.
This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 Ã 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine.
This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.
This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.
This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information.
maximum number of results exceeded
please refine your search
