comp air used for sale

Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement.

Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infeed module Siemens Simodrive 611 5kW/10kW. Documentation available. On-site inspection is possible. All articles are new.

Engine power: 30 kW (for the 30 kW class). Control: Standard with SIGMA CONTROL 2 for automatic control, monitoring and energy optimization. Special features: SIGMA PROFIL® screw block for high energy efficiency, with refrigeration dryer for compressed air drying

Refrigerant compressors system Bitzer -Type: 4HTC-20KI-40S (x3), 2HHC-2KB-40S (x2) -Volume: 12 m3/h (x3), 4.34 m3/h (x2) -Control cabinet included -Dimensions: 3200 x 870 x 1850 mm -Cabinet dimensions: 2050 x 1200 mm -Refrigerant: CO2 -Items in magazine: 1 -Reference number: Z122 -Condition: Used in very good condition, ready to work

Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg

Refrigerant compressors system Bitzer -Type: 4FTC-20KI-40S (x3), 2HHC-2K-40S (x1), 2KHC-05K0-40S (x1) -Volume: 17.8 m3/h (x3), 4.34 m3/h (x3), 2.71 m3/h (x3) -Control cabinet included -Dimensions: 2950 x 950 x 1950 mm -Cabinet dimensions: 2050 x 1200 mm -Refrigerant: CO2 -Items in magazine: 1 -Reference number: Z121 -Condition: Used in very good condition, ready to work

Refrigerant compressors system Bitzer -Type: 2JSL-2K-40S (x1), 2HSL-3K-40S (x2), 4HTC-20K-40P (x2), 4HTC-20K-40S (x1) -Volume: 3.48 m3/h (x1), 4.34 m3/h (x2), 12 m3/h (x3) -Cooling capacity for CO2: approx. 96 kW at -20°C/40°C -Dimensions: 3980 x 880 x 2050 mm -Items in magazine: 1 -Reference number: Z120 -Condition: Used in very good condition, ready to work

Complete set condensing Unit Rivacold with 1 compressor Copeland Scroll ZF24 for a freezing room with a capacity of 80 to 120 m3, Rivacold condensing unit -Compressor type: ZF24KVE-TWD -Cooling capacity: 15.7 kW at -5°C/40°C, 12.97 kW at -10°C/40°C, 7.03 kW at -25°C/40°C -Dimensions: 1750 x 1000 x 1500 mm -Number of fans: 2 x 500 mm Evaporator Rivacold -Type: RX50338 -Cooling capacity: 8 kW -Fin spacing: 8 mm -Electric defrost -Dimensions: 1750 x 570 x 460 -Number of fans: 3 x 350 mm We have 10 complete sets (condensing unit + evaporator) in very good condition/ready to work.

for sale 5 compressors INGERSOLL RAND year 2004 at 2019 model: 2x units C70MK3 430 KW 1xunits MGP655D 48 KW 1xunits C700 100 630 KW 1xunits HKO 400 480KW

Key data: 2000 kN, 352 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible.

Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.

High pressure compressor LMF 40 bar Type: Eco Pet VD 1350 - B Year of manufacturing: 2003 Capacity: 1.350 m³/h Maximan pressure: 42 bar Electric power: 243 kW Working hours: approx. 35.800 h with Siemens S7 PLC and Danfoss frequency drive incl. pressure air buffer tank, 900 ltr. incl. air dryer incl. chiller / cooling tower the machine is dismantled and on stock in Germany

Technical data: - Operating hours 4248 h - Load hours 1978 h - Operating pressure 10 bar - Delivery rate 3.34 m³/min - Drive 400 V / 22 kW - Motor speed 3000 rpm - Space requirement approx. W 1300 x H 1250 x D 800 mm - Weight approx. 490 kg

Technical data: - Operating hours 20256 h - Operating pressure 13 bar - Delivery rate 4.09 m³/min - Drive 400 V / 26 kW - Motor speed 3000 rpm - Space requirement approx. W 900 x H 1750 x D 900 mm - Weight approx. 490 kg

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

Piston Diaphragm Pump Motor power 5.5 kW Flow rate 6 m3/h Delivery pressure 15 bar The pump was only in operation for 3 years to feed a chamber filter press with vegetable oil

feed pressure: 8 bar Effective free air delivery: 235/165 L/min Receiver capacity: 50 / 10 l / bar weight of the machine ca.: 37,5 kg. Number of cylinders: 2 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information.

Operating hours: 70792 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

This ERREBI TM5 was manufactured in 2000. Designed for wooden pallet and packaging production, it operates on multiple workstations for simultaneous component nailing. Featuring a CNC system, it ensures all movements are controlled with no manual adjustments needed, allowing quick format changes. Optional tools like drills and saws can be added. Contact us for more information about this machine.

Operating hours: 39521 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine.

This SORBINI SmartCoater SP1 was manufactured in 2009. It features a working speed of 5–20 m/min and can handle workpiece widths up to 1,350 mm and thicknesses up to 100 mm. It includes SUPERFICI UV lamps and a VENJAKOB conveyor belt, enhancing its efficiency in wood production. For more information about this machine, please reach out to us.

Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C

This MAQUINARIA LDM VPS 2103 was manufactured in 2020. An industrial automated system for wood production, it features a hydraulic nailing system, chain-driven pallet transport, and servo motors for precise block positioning. It operates on 220V or 380V and handles pallet widths from 800 mm to 1500 mm. Safety certified under EN 12100 standards. Contact us for more information about this machine.

1.0 PCS screw compressor system consisting of the The following components: 1.0 pcs Screw Compressor, Manufacturer: Almig, Type: Belt Drive 15 , Year of manufacture: 2013, Operating pressure: 10 bar, power 15 KW 1.0 pcs. Compressed air dryer Manufacturer: Prematic 1.0 pcs pressure vessel 1.0 Sr. Oil Separator

Find more here - / Contact us at -

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

Compressor Boge, CL 4– used - : Ex-location prices (net): 2.950.-€ (net) Manufacturer: Boge Type: CL 4 Year of Make: 2005 approx. 4,000 operating hours Compressed air tank: Manufacturer: BWB H-Nr 540226 Volume: 90L PS 11 bar T.max: 80 degrees T.min: -10 degree K-SK 3400 Ph 16.5 bar Condition: good Available: immediately Location: Waltrop

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

The Boge Öwamat 6 (identical in construction to the Beko ÖWAMAT 6) is an oil-water separator for the treatment of compressed air condensate. It reliably filters oils and suspended solids from the condensate so that the cleaned water can be discharged directly into the sewer system in accordance with the law.

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Key data: 1 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 6 liter container (painted) Performance data Volume flow 270 l/min Operating pressure max. 10 bar Nominal power motor 1.8 kW Number of cylinders 1 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 2 / 40 °C Sound level 73 dB(A) Voltage / Frequency 230 / 50. V / Hz Dimensions and weight Length x width x height 455 x 475 x 500 mm Weight 24 kg Compressed air outlet coupling Compressed air tank capacity 6 lt

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: Belt drive Including 270 litre container (painted) Performance data Volume flow 455 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Number of cylinders 2 Compressor stage(s) 2 Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 70 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1520 x 590 x 1260 mm Weight 180 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Key data: 3 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 90 liter container (painted) Performance data Volume flow 330 l/min Operating pressure max. 10 bar Nominal power motor 3.0 kW Number of cylinders 2 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1065 x 615 x 1000 mm Weight 89 kg Compressed air outlet coupling Capacity compressed air tank 90 lt

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Key data: 3 , 40 , 14

Capasity 14,4 m3 Pressure 40 bar rpm 1450 power demand 3,6 kW

Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.

This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine.

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

Key data: 11

Shamal K60 Suitable for 15 hp, flow rate 1745 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=245mm Y=300mm D=550mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Shamal K30 Suitable for 5.5 / 7.5 hp / 4 / 5.5 kw, flow rate 900 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=190mm Y=225mm D=400mm This compressor pump is used by several compressor manufacturers. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Key data: 22 , 8 , 2

Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)

Compressors Nirvana oil-free variable speed screw compressors 55-75 kW it ran 19138 hours. Nirvana oil-free compressors, with a matching variable speed inverter and hybrid permanent magnet motor (HPM®), offer unparalleled energy efficiency at all speeds and outstanding reliability. They deliver ISO 8573-1:2010 Class 0 certified, 100% oil-free air for the most critical applications Find more here - / Contact us at -

Thermostat housing incl. thermostats and entire interior Mitsubishi No.: 37546-23701

Refrigeration Compressor / Condenser Unit Second Hand Manufacturer: Franchill Ltd Model: SP3X45-RDM-FS 400V-1PH-50Hz Compressor / Heater Model: ZB45KCE-TFD 3 x 4.6kw For more information and more available stock please visit us at - advancedbrewing.co.uk