combine used for sale

- Tape inserter - Standard Model

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

2G agenitor 406 CHP container, used, on behalf of a customer, with unit certificate Year of Make: 2013 Running Time: Approx. 30000 Bh Power: 250 kW electr. Delivery available for an extra charge

Fendt 5275 C combine harvester – modern and powerful harvester • Built in 2024 with only 449 operating hours • Very low drum wear (only 260 h) • Powerful 306 hp engine • Hydrostatic drive for comfortable working • All-wheel drive for optimum traction even in difficult conditions Cutting unit & harvesting: • Cutting unit 5.40 m working width • Incl. rapeseed equipment with hydraulic rapeseed separators left/right • Cutterbar car (Ziegler, 1-axle, built in 2024) • Reel horizontally adjustable • Autocontour for optimal ground tracking Equipment: • On-board computer & flow control • Hectare counter • Air conditioning for comfortable working • Pendulum compensation • Reversing device • Rotating beacon • Straw choppers • Chaff Distributor • Loss measurement Tyres: • Front: 650/75 R32 (approx. 80% ...

John Deere T550 combine harvester – reliable and powerful harvester • Built in 2019 with only 1,179 operating hours • Very low drum hours (621 h) • Powerful 305 hp engine • Hydrostatic drive Cutting unit & harvesting: • Cutting unit 6.70 m working width • Incl. cutting unit trolley (Zürn) • Mechanical rapeseed blades • Autocontour for optimal ground tracking Equipment: • GreenStar 2630 display • AutoTrac preparation (GPS ready) • Yield measurement & throughput control • On-board computer & hectare counter • Air conditioning • Pendulum compensation • Reversing device • Straw choppers & chaff spreaders Technology & Comfort: • XtraFast emptying system • Electrically adjustable screen box • Two-stage threshing drum drive • Laser sweeping control • LED lighting package • Com ...

Key data: 26 KW, 230 V

Viessmann Gas/LPG Sterling Micro-CHP Vitotwin 300-W CH3HC-26 Gas/liquefied petroleum gas sterling micro-CHP electricity and heat generator from 2014, unknown operating hours, with 800 l accumulator and new spare parts (control board, condenser, air distribution valve, gear motor). 1.0 KWel, 230 V / 50 Hz. Manufacturer: Viessmann Model: Vitotwin 300-W CH3HC – 26 Type: Gas and LPG Sterling Micro CHP Heat output (TV/TR 50/30 °C) [kWth] 3.6–26.0 Heat output (TV/TR 80/60 °C) [kWth] 3.2–24.6 Electr. Output (gross) [kWel] 1 Serial Number: 7369298401232109 Engine: microgen linear free piston sterling engine Engine power [KWel]: 1 Year of Make: 2014 Operating hours: unknown Weight [kg]: 230 Dimensions LxWxH [m]: 0.50 x 0.50 x 1.00

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5) Auction-ID: A7-46642-113

Profile steel shears combined: - Footswitch - Length stop Round steel 30 mm Square steel 28 mm Angle steel 90 x 8 mm Flat bar 150 x 8 mm Pressure capacity 35 t Total power requirement 2.8 kW Machine weight approx. 0.5 t Space requirement approx. 0.75 x 1.0 x 1.5 m Condition: unchecked (6) Auction-ID: A7-46642-47

Machine number: FG3721 for all other technical data see photographed nameplate Auction-ID: A7-46287-154

Serial number 531B093 for maximum material cross-sections see photographed nameplate incl. punching tools as shown in the pictures with length stop max. stop length approx. 2000 mm Reference: Prologtec Lot 1 Auction-ID: A7-46763-125

Key data: 150 KW, 140 kVA, 400 V

Viessmann Gas CHP Vitobloc 200 EM 140/207 Gas electricity and heat generators from 2016, 69,200 operating hours, with control, heat exchanger and silencer. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 44.2L12C 6/4, 165 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 140/207 Type: Gas CHP Serial Number: 7411151 5 03073 105 Power [KWel]: 140 Voltage [V]: 400 Current [A]: 238 Frequency [Hz]: 50 Engine: MAN E2876E312 Motor power [KW]: 150 AC Generator: Leroy Somer LSA 44.2L12C 6/4 Power [KVA]: 165 Year of Make: 2012 Hours: 69,200 Weight unit [kg]: 3,420 Dimensions LxWxH [m]: 4.45 x 0.95 x 1.73

Manufacturing number: 75-8771 Max. grinding wheel diameter: approx. 250 mm Max. sanding belt width: approx. 40 mm Auction-ID: A7-46287-11

Belt width: 65 mm incl. whetstone, diameter: 110 mm Auction-ID: A7-46287-69

Technical details Manufacturer: Walter Model: WDPP 410 KBA Type: Combined slab recovery circular saw / multi-blade edging saw Year: 2023 Motor power: - 2 × 6.5 kW vertical motors - 2 × 20 kW horizontal motors Configuration: - Extended 4 m cutting version - Multi-blade saw arrangement Vertical saw blades: Ø 500 mm Horizontal saw blades: Ø 350–425 mm Number of saw blades: Typically 6 blades (KBA version) Dimensions: - Width: 2000 mm - Length: 9900 mm - Height: Approx. 1200–1400 mm Weight: 2400 kg Application: Slab recovery, edging, and multi-blade wood cutting operations Condition: Used Auction-ID: A7-40554-7

Key data: 20 KW, 400 V

Viessmann Gas-CHP Vitobloc 200 EM 20/39 Gas, electricity and heat generator, built in 2015, 63,264 operating hours. 20 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 42.3VS2 C 6/4, 27 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 20/39 Type: Gas Electricity and Heat Generator Serial Number: – Power [KWel]: 20 Power [KWth]: 39 Voltage [V]: 400 Current [A]: 39 Frequency [Hz]: 50 Year of Make: 2015 Hours: 63,264 Weight unit [kg]: 800 Dimensions LxWxH [m]: 2.25 x 0.90 x 1.50

Massey Ferguson Centora 7282 – 2005 combine harvester equipped with Massey Ferguson 25 FT cutterbar with transport trolley and rapeseed side cut; High-performance and comfortable agricultural machine, ideal for grain farms looking for a reliable machine with a high harvesting capacity. Auction-ID: A3-43539-38077

Very nice Massey Ferguson Centora 7280 AL combine harvester from 2009, in good general condition and ready to work. Machine equipped with a 25 FT cutter bar with transport trolley and a rapeseed side cut. Clean, complete and well maintained set. Auction-ID: A3-43539-38078

Key data: 420 KW, 400 V

Kuntschar und Schlüter (Wolf) Gas CHP GTK 382K Gas electricity and heat generators from 2013, 64,000 operating hours, with control, cooling and two silencers. Engine in need of overhaul. 382 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 355MA4-B, 680 KVA Manufacturer: Kuntschar and Schlüter (Wolf) Model: GTK 382K Type: Gas CHP Serial Number: 0094 Power [KWel]: 382 Engine: MAN E2842LE322 Engine power [KW]: 420 Year of Make: 2010 Hours: 64,000 MarelliGenerators MJB 355MA4-B AC Generator Manufacturer: MarelliGenerators Model No.: MJB 355MA4-B Type: AC Synchronous Generator Serial Number: MJB3532L014M0 Power [KVA]: 680 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 981 Speed [1/min]: 1,500 Year of Make: 2013 Weight [kg]: 1.780

Massey Ferguson MF30 combine harvester from 1998, produced by Dronningborg Industries A/S, equipped with cab, GPS system, mechanical gearbox and walker threshing system. Motor power 114 kW, max. speed 15 km/h, reading hours 2359, tyres front 30.5 LR 32 and rear 400/60-26.5, own weight 1700 kg, dimensions 6000 × 2500 mm, serial number 55161, registration TFR-84-Z. Auction-ID: A1-40140-21

John Deere CTS Combine Harvester Complete with a JD 922 header with trailer Year of construction 2000 Engine hours 3018 Drum hours 1536 2WD 25 km/h Air conditioning 5.20 meter unloading auger Shredder chaff spreader Mechanical deflector 710/75R34 front tyres 440/80R28 rear tyres John Deere 922 header (Year of manufacture 2000) with Zürn rapeseed attachment (BJ2007) including Brun's trailer. Auction-ID: A1-40140-70

engine hours: 3878 hours, cage hours: 2853 hours, equipped with: John Deere 625R header (working width 7500mm, year of construction 2009, 2190kg), loss monitor, yield measurement, moisture measurement, four-wheel drive, air conditioning, electric screen adjustment, John deere 9 liter diesel engine, chaff spreader, forage harvester, 5 meter discharge pipe, GreenStar ready, Dutch license plate registration Auction-ID: A1-40140-1

Combination machine 4 operations trolley 250cm saw tiltable up to 45g with scorer. Milling spindle/toupie tiltable up to 45g shaft 30mm flat bench 300mm wide thicknesses up to 24 cm thick 3 motors connection 3x22v Auction-ID: A3-43544-5220