combine harvester used for sale

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Lightbus combined input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, Input/Output Module -Type: M-1410 001 -Input voltage: 24 V DC -Quantity: 1 available -Dimensions: 165/75/H70 mm -Weight: 0.7 kg

Combined surge arrester module Blitzductor, Profibus single module, for PLC control, lamp holder -3x: 919670 -3x: 919562 -6x: 919506 Price: complete -Weight: 0.5 kg

complete 230kW

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

On offer is a combined heat and power plant from the manufacturer Energiewerkstatt Hannover, model ASV 20/43. The complete engine was completely replaced about 1.5 years ago for approx. € 20,000.00 and is therefore to be considered as new. Technical data: Manufacturer: Energiewerkstatt Hannover Model: ASV 20/45 Gas Type: Natural Gas The plant is currently located at our customer's site near Hanover and is being sold due to restructuring. A viewing is recommended. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. It is also the buyer's responsibility to carry out any professional dismantling and loading of the assets. Since these are used assets, we sell them without guarante ...

FOR SALE – 2 × GE JENBACHER JMS 320 GS-B COGENERATION PLANTS Two complete cogeneration units available – 2015 and 2018 NEGOMAT offers for sale two GE Jenbacher JMS 320 GS-B cogeneration units, supplied complete with Stamford alternators, cooling and heat exchange equipment, auxiliary equipment, and containerized installation. Both units are rated at 1,067 kW and are equipped with Stamford PE734E2 alternators rated at 1,625 kVA. Unit 1 – Year 2015 Manufacturer: GE Jenbacher Model: JMS 320 GS-B Year of manufacture: 2015 Rated power: 1,067 kW Operating hours: 57,000 h Speed: 1,500 rpm Voltage: 400 V Frequency: 50 Hz Rated current: 1,540 A Unit 2 – Year 2018 Manufacturer: GE Jenbacher Model: JMS 320 GS-B Year of manufacture: 2018 Rated power: 1,067 kW Operating hours: 37,000 h Speed: 1,500 rpm Voltage: 400 V Frequen ...

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

Auction-ID: A3-46142-20707

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...

We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Siemens AXIOM Iconos R 200 as spare parts dispenser with the following system components: Generator Polydoros SX 65/80_Model No. 8609364 X2217 m. Bedienpult_Model No. 3157554 X2076 Tube Optitop 150/40/80 HC 0,6/1,0, Tiefenblende_Model No. 10092618_Bj. 01/2017 digital image processing Fluorospot Compact_Model No. 7144434 Gerätesteuerpult_Model No. 7030708 G5478 Image intensifier 40 cm_Model No. 3828832 V5092 Handauslöser_Model No. 9722059 G5455 Monitor Simomed HM 44_Model No. 2323464-2_Bj. 2006 Flat screen monitor Acer_Model No. V193 B_Bj. 2009 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EX ...

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Auction-ID: A3-46114-11392

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...

Siemens combined X-ray recording and fluoroscopy device Iconos R 200 with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0,6/1,0 Digital image processing Fluorospot Compact Sirecon 33-4 HDR image intensifier • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactur ...

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...

1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

Key data: 330 , 413 , 400

Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including external control cabinet and gas line.

Key data: 400 KW, 570 kVA, 400 V

Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued  ...

- Flat pile feeder FD 66-T - Tremat - Digital Control - 6 folding pockets - 2 knifes - mobile stream delivery

FSA Combined MIG/MMA Welding Machine MIG Shielded Gas Welding 30 - 315 A MMA Electrode Welding 10 - 200 A MIG burner hose 2 m Mass clamp 3 m Reducer Electrode holder Weight approx. 40 kg

Key data: 714 KW, 400 V

CHP natural gas, 2 units Onsite Energy ME3042L3 YOM 2009, Engine: MTU E3042L9, YOM 2016, 23,000h operating hours, Alternator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorption Chiller: Carrier 16LJ-A24E 689KW Cooling Capacity, YOM 2016, Emergency Cooler : Güntner GFH 090.2B/2x2-M 12m chimney, silencers, pumps, actuators, dampers, valves, gas control unite Superior control: synchronization, load management, island operation, grid support; ec Power cabinets, gas control valves, 714KWe, termal 1058KW, 698KW cooling capacity

Key data: 500 KW, 600 kVA, 400 V

Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997

Key data: 1200 KW, 1600 kVA, 400 V

Jenbacher Gas engine [JMS 416GS] available in dismantled condition. Specifications: - Type: J416 GS - mfy: 2012 - Power: 1222kW - Fuel: Biogas - Frequency: 50Hz - Alternator rating: 1870kva - Major Overhaul done at 30000 and 60000 hours. - Mass: 13550kg - Service Log book and maintenance manual available - Accessories: Control Panel, Gas line, Heat exchanger, pumps.

- Pallet feeder - Navigator Touchscreen Control - 6 buckles in Folding Unit 1 - 2 knifes at S-KTL unit - Anti Noise hood - Palamides Alpha 700 delivery

Key data: 330 KW

Used Jenbacher 208 gas engine, GenSet BJ 2005; Replacement engine was installed in 2017 - since then 30,000 operating hours (without maintenance), generator, load cabinet, Diane XT, gas control system natural gas, more information on request

Combination control FER / DMS KOMBI - START New ! Dimensions: 260 x 150 x 140 mm

Combined precision rolling bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 70130 ( ARNB70130 ) INA No. ZARN 70130 TN ( ZARN70130TN ) Shaft diameter: Ø 70 mm Outer diameter: Ø 130 mm Bearing thickness: 82 mm New ! Dimensions (packaging): 150 x 150 x 110 mm

2007 Mercedes Combined heat and power plant (CHP) The CHP plant was originally intended for an oil platform. Therefore, it is protected against salt water and can also be operated in island mode. Technical data (See pictures) CHP plant with Mercedes engine, which is designed for multi-quality fuel (diesel, heating oil, pyrolysis oil or vegetable oil). Thus preheating unit and corresponding exhaust gas purification. BJ. 2007. Operating hours: 0 (test run only); The unit was never connected to the network. If palm or vegetable oil is used, preheating” is required to get above the pour point. All pumps were completely overhauled by the manufacturer when we purchased them (see Rg with maintenance report). If you want to drive in island mode, this must be changed on the control + the controller on the generator must be replaced. In addition to electricity, the unit can also recover  ...

Combined precision roller bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 55115 INA No. ZARN 55115 TV shaft diameter: Ø 55 mm Outer diameter: Ø 115 mm bearing thickness: 82 mm New ! Dimensions (packaging): 135 x 135 x 110 mm

Combined precision rolling bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 45105 INA No. ZARN 45105 TV Shaft diameter: Ø 45 mm Outer diameter: Ø 105 mm bearing thickness: 82 mm New ! Dimensions (package): 125 x 125 x 110 mm

Key data: 206 KW, 500 kVA, 400 V

Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018

55 ton multi station

MBO T530 folding machine with stand up feeding with the following units: 1. MBO T 530 -1 53/4-R 2. MBO T530 -2- 53/4 3. MBO stream delivery table The machine is in production ready condition, with a huge amount of serial equipment such as guides, perforation wheels, etc. Available immediately, can ship worldwide.

FOLDING MACHINE MBO T 500 4-F -Max paper size 52 x72 cms. -Year 2003, only one onwer -Rollers in excellent conditions -Flat pile feeder -Four combi folding pockets -MC Control FW1 -Anti noise hoods protections -Sheet delivery MBO SA 52 -All manuals, tools and accessories -Available in March

Key data: 2500 KW, 10500 V

FOR SALE: Caterpillar G3520H Gas Generator Set (2013) Zero Hours Since Major Overhaul | 2,500 kW Continuous Power Output Maximize operational efficiency and reliability with this prime power, high-capacity industrial generator. This natural gas-powered genset delivers continuous-duty performance and is ideally suited for mission-critical infrastructure, distributed energy systems, and onsite power generation. Model: Caterpillar G3520H Natural Gas Generator Series: CAT 3520H Engine: 20-cylinder V-type, turbocharged and aftercooled Displacement: 95 litres Serial Prefix: GFP Engine Serial Number: GFP00117 Genset Serial Number: G7X00021 Arrangement Number: 422-8179 Rated Output: Up to 2,500 kW Speed: 1,500 RPM Fuel Type: Natural Gas Voltage Range: Up to 11 kV Controls: CAT EMCP electronic control system Applications: Industrial, Uti ...

Key data: 3600 KW, 4600 kVA, 6600 V

We offer a MWM CHP Type: TBG 632 V16 for sale Specifications: Engine: MWM Type: TBG 632 V16 Power: 3600 kW Generator: AVK Power: 4600 KVA Voltage: 6600 V Running hours: 47,000 h Weight: 46,000 kg Scope of delivery: motor plus generator on base frame

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A