133,957 used machines on RESALE, but how to find them? Machine Search
Punching force 80 tons punching capacity Ø 25 x 23mm Diameter x thickness Ø 50 x 12mm Projection 310mm stroke length 100mm Stroke rate at 20mm 28 / minute Table size 700 x 500mm Working height 1050mm Motor power 5.6kW Model weight 1960kg Dimensions LxWxH 1280x865x1980mm
FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...
This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details.
Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately
Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.
This 3-axis HARTFORD HSA-323 gantry milling machine was manufactured in 2021. It features a substantial table size of 3000 Ã 2200 mm and a maximum table load of 10,000 kg. The machine offers impressive travel distances with an X-axis of 3000 mm, Y-axis of 2300 mm, and Z-axis of 1000 mm. If you are looking to get high-quality milling capabilities, consider the HARTFORD HSA-323 machine we have for sale. Contact us for further details.
This 3-axis DANOBAT CHROMA 30 was manufactured in 2011. It features a punching force of 30 t, a maximum sheet thickness of 6 mm, and a working area of 3000 x 1500 mm. The machine operates at a punching speed of 1000 strokes/min and includes a tooling system valued at â¬20,000. If you are looking to get high-quality punching capabilities, consider the DANOBAT CHROMA 30 cylindrical grinding machine we have for sale. Contact us for further details.
Weibert ADM 320 Dressing thickness planer Planer width 320mm 3 knife shaft Motor 3kW 400V Dressing table 1500 x 320 mm chip removal 5mm Speed 5000 rpm Thickness table 700 x 316mm Passage height 230mm Feed 7m/min Weight 260kg WJ-ADM-320
Surface grinding machine manufactured in 2014. This OKAMOTO ACC 42 SA-iQ features a working surface of 450 x 200 mm and a longitudinal stroke of 530 mm. It includes a maximum weight capacity on the table of 120 kg and a standard grinding wheel diameter of 205 mm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 42 SA-iQ machine we have for sale. Contact us for further details.
This 3-axis OGP SmartScope Vantage 450 was manufactured in 2016. It features a travel range of 450 x 450 x 250 mm and is equipped with a Renishaw SP25M Scanning Probe Kit and Telestar Plus TTL-Laser-Sensor. The machine includes a 24 LCD monitor and various accessories for enhanced functionality. If you are looking to get high-quality optical measurement capabilities, consider the OGP SmartScope Vantage 450 machine we have for sale. Contact us for further details.
This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details.
offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg
CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy
Laser Prima Industrie CP 4000 3000x1500 4000W Anno 2006 Ore lavoro circa 30 mila No carico/scarico Piano doppio Revisionato Visibile in funzione
Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: wrt, deburring machine with base -Drive: 3.0 kW / 2800 rpm -Brush: Ø 250 mm -Shaft: Ø 80 x 110 mm -Dimensions: 660/430/H1200 mm -Weight: 101 kg
Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...
CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.
PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...
ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools
technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...
Used Capsuling Machine GAI 4264D The GAI 4264D is a reliable, second hand capsuling solution engineered for precise application of capsules on glass bottles in demanding beverage production environments. Operating at up to 3000 bottles per hour with 4 dedicated heads, this model is well suited for wineries, breweries, distilleries, and diversified industrial packaging lines seeking to enhance presentation and product security. With format compatibility from 0.06 L miniatures to standard 0.75 L bottles, it integrates seamlessly into a used bottling line alongside rinsing, filling, capping, and labeling equipment. Technical Specifications & Performance Data Optimized for continuous operation, the GAI 4264D offers stable output and repeatable capsule placement for premium appearance and brand consistency. Manufacturer: GAI Model: 4264D Year of manufacture: 1996 Category: Capsuling machine O ...
Diosna spiral kneader SPV 160 AD with 2 extendable boilers For a maximum of 160 kg of dough per bowl Kneading tool made of stainless steel Including two stainless steel shells Timer with two clocks Two speeds Friction wheel drive Condition: obsolete; checked and cleaned
Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing
This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details.
CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details.
It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.
Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm Cutting in a water bath Conicity: +/- 15° at 120mm
Machine tool manufactured in 1999. This STAHLI FLP 700 features a copper plate with a diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the STAHLI FLP 700 machine we have for sale. Contact us for further details.
Spiral kneader with vat trolley Diosna SP 240 AD Incl. 3 vat trolleys 2 speed, traditional control Power in dough: 200 kg Vat diameter: 900 mm Friction wheel drive Pliers locking
KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available
Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!
Machine type: CNC Vertical Machining Center Manufacturer: KNUTH Werkzeugmaschinen GmbH Model / Type: VMC 1400 F Year of manufacture: 2015 Serial number: 159472 Worktable: Table size: 1800 x 800 mm Table height: 880 mm T-slots: 18 mm / 6 slots Max. table load: 2000 kg Travels: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Distance spindle–table: 120 – 830 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Main motor power: 10 kW Feed rates: Rapid traverse (X/Y/Z): 24 m/min Working feed (X/Y/Z): 10 m/min Accuracy: Positioning accuracy: ±0.005 mm Repeatability: 0.005 mm Pneumatics: Air pressure required: 6 bar Air consumption: 400 l/min Electrical data: Installed power: 35 kVA Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight: Footprint: approx. 2980 x 2 ...
Viewing by appointment. Auction-ID: A1-40256-91
Hand sealing machine for sample packaging blister Sealing jaws can be triggered with pneumatic foot switch. Temperature and sealing pressure adjustable. Sealing of one side at a time, max. 150mm width, sealing pattern see picture.
Milling machine MACMOM M 100, year of construction 1970. Without table. At call.
Storage capacity 5 liters. Auction-ID: A1-40256-118
Assortment of screws, extensions, couplings. Auction-ID: A7-46802-30
Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.
maximum number of results exceeded
please refine your search
90 € 
