135,418 used machines on RESALE, but how to find them? Machine Search
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...
Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...
connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2500 mm y-travel: 750 mm z-travel: 1000 mm table surface area: 2550 x 800 mm spindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers
This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information.
Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet
CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...
Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900 ...
Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment.
Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary.
Short Description This facility will be available from the end of Oct 2026. A used CNC robot carpentry machine incl. mobile gantry trolleys. - Robot Kuka KR 240-2 C2000 Year of construction 2010 - Linear unit approx. 3m - Portal - 2 sliding slides 4.5x12m (connectable) - Cutting sizes 4.5m x1.2m x24m (height can also be raised to 2m with additions) - Refrigeration unit as good as new - Frequency converter as good as new - PLC Simens S7 - "Small control panel" PLC Simens S5 - Always maintained and checked, verifiable. - Table antieb has a Kuka motor - Under the table is a scraper bottom - 2x swivelling baffle wall - Protective fence 2-3 years old with light barriers etc. with 6 doors - Fence approx. 57m (on request and negotiable) - Additional 1 spare spindle, the same spindle as installed on the robot o Recording HKS 55 o 18KW o New revision parts for the spind ...
ID3860 Wellco-Drill WD90 year/Baujahr 2007 approx. 1400 hours/hours Crawler-mounted drilling rig, very good condition, 6t pullback force, 3-stage flush pump, engine: Perkins diesel engine (131 kW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig; scope of delivery includes: WellcoDrill WD90 drilling rig, 34 x 3m drill rods, suction hose, suction strainer. Drilling rig on crawler chassis, very good condition, 6t retraction force, 3 stage mud pump, engine: Perkins diesel engine (131 KW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig, scope of delivery includes: WellcoDrill WD90 drilling rig, 34x 3m drill pipe, suction hose, suction basket
Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Key data: 200 mm, 900 mm, 310 mm
Paulimot PM4000 lathe with measuring system and base cabinet For sale is a Paulimot PM4000 precision lathe including a digital measuring system (3-axis digital display) and matching base cabinet. The machine is ideal for use in workshops, model making, prototype production, training or for demanding hobby users. The integrated measuring system allows work to be carried out precisely and comfortably. Equipment: Paulimot PM4000 Lathe Digital measuring system / digital display Sturdy base cabinet Lead and pull spindle Forward and backward running Various feed and thread settings Ready to use Technical data: Center width: 900 mm Circumferential diameter over bed: 310 mm Spindle bore: 38 mm Clamping range inner jaws: 4-200 mm Clamping range outer jaws: 65-200 mm Motor power: 1.5 kW Power supply: 400 V Condition: The machine is in used and functional condition ...
Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.
bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paulimot SX4 milling machine with digital display and base frame For sale is a Paulimot SX4 milling machine in neat and fully functional condition. The machine is ideal for workshops, model making, prototype production as well as demanding hobby and small series work. Thanks to its stable construction and digital display, the SX4 enables precise and comfortable work on steel, aluminium, plastics and many other materials. Equipment: Paulimot SX4 Milling Machine Digital display / digital measuring system Stable machine substructure Stepless speed control Drilling and milling function Base frame Ready to use Technical data: Table size: approx. 820 x 240 mm Travels: X-axis: 450 mm Y-axis: 250 mm Z-axis: 320 mm Spindle holder: SK30 Stepless speed control Power supply: 230 V Condition: The machine is in used, well-maintained condition with the usual signs o ...
WE OFFER AN NICE CONDITION LVD , WE CAN MAKE FOR CUSTOMER AS WELL START UP OF MACHINE INCLUDING TRAINING CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL
SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...
turning diameter: 1250 mm turning length: 1500 mm swing diameter over bed slide: 850 mm total power requirement: 22 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3100x2150x1825 m Brand: JMTCL Type: CW61125B Distance between centers: 1.500 mm Centerheight: 625 mm Swing over bed: 1.250 mm ø Swing over support: 850 mm ø Maximum turning diameter : 1.250ø x 1.500 mm ø Spindle boring: 135 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 450 mm y-travel: 300 mm z-travel: 240 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Matheys Type: 2B Table length: 850 mm Table width: 235 mm X: 450 mm Y: 300 mm Z: 240 mm Maximum speed: 2.500 RPM Variable adjustable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
Working width: 530 mm Length of the planing table: 3.000 mm Number of knives: 4-TERSA St. Motor output: 5,5 kW FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE Partnership Edition Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: 8,990.00 euros ...
A rack with various knives and blades Auction-ID: A1-50229-72
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.
This 3-axis TRUMPF TruLaser 3030 (3.2 kW) was manufactured in 2014. It features a substantial travel range of 3000 mm on the X-axis and 1500 mm on the Y-axis, making it suitable for various cutting applications. The machine includes a TRUMPF LoadMaster automated sheet loading system for enhanced efficiency. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.
MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...
Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage
Rated power at 50%ED: 20kVA Short-circuit current: 11.6kA Electrode force: 180daN Projection: 455mm Arm distance, stepless: 173-410mm Electrode cone: Mk1 --- Welding control: WS 402 (4 times, 2 program) --- Incl. additional options: - Foot switch - Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine.
Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details.
small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022
Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600 FX The AW-5600 FX is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It protects film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and visually appealing. Technical data Wrapper DIGI AW-5600 FX 220-240V / 50-60 Hz / 1.8 kW suitable for Food-Tainer bowls Performance up to 17 packets/min Film width: 350 - 500 mm Year of construction: 2018 Total weight approx. 250 kg Digi marking system 3/6 kg, Min 20g, e=1/2g Calibrated until 31.12.2022 Function tested, ma ...
CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.
Hydraulic injection moulding machine manufactured in 2015. This KraussMaffei 1300-12000 MX features a clamping force of 13,000 kN and platen dimensions of 2210 x 1910 mm. The injection unit has a screw diameter of 105 mm and a shot volume of 5195 cm³. If you are looking to get high-quality injection moulding capabilities, consider the KraussMaffei 1300-12000 MX machine we have for sale. Contact us for further details.
Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.
Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.
maximum number of results exceeded
please refine your search
1.700 € 
