126,720 used machines on RESALE, but how to find them? Machine Search
Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg
lechrichter, used,      sheet leveller, used,  Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm   min. sheet thickness / min. sheethickness: 3 mm  Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of    straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed  ...
YOM 1987. Worked not more than 10 years, one shift Grinding length 3000 mm Grinding width 1700 mm Workpiece height 1600 mm Distance between columns 1860 mm Grinding heads- 2 Table surface 3230x1600 mm Number of slots of the table 10 pcs Permissible table load with evenly distributed load 5000kg/m Weight of work-piece 15t Table travel speed 1-40m/min
for cellophanizing of chocolate boxes top condition Siemens PLC with 2 adjustable folding fittings 2 machines available, price is per piece
The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.
Weibert FR3 Saw milling Demonstration device Format sliding table 2300mm or 2600mm Cutting height: 103mm Auslegertich kpl. Saw blade: swivel, max.315mm 3KW motors Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm. Safety rails milling stop 500mm Right- and left-hand-running milling cutter WJ-400100
The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg
Model: Gothot 90, Type: JRHH5ARGA Year: 1958 Capacity: 90kg of green coffee per roast (360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Gas: natural gas/LPG Burner: Gothot - indirect Pneumatic green coffee loader, destoner and cyclone included The roaster will be fully refurbished including: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing new direct drive motors with speed control on the destoner, drum and exhaust fan, - installing new pneumatics, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - repairing the burner (optional: new burner) - new paint - thermal paint on the parts that are exposed to high temperatures and powd ...
with vacuum pump speed-controlled FU with double coat Panel mobile cart Temperature gauge Manual Spare parts Dimensions LWH: 1000 x 700 x 1300 mm Weight: approx. 150 kg
Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...
Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.
- Folding stations: 1st folding unit with 6 pockets (parallel folding) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel folding) - Max. sheet format: 520 x 840 mm - Min. sheet format: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on folding pattern and material) - Paper weight: 40 – 250 g/m² - Fold types: single fold, wrap fold, zigzag fold, double parallel fold and much more - Feeder: Flat pile feeder (PBA) - Control: Electronic control with folding program memory - Delivery: Shed delivery (STA) - Optional: Perforating, creasing or cutting units (depending on equipment) - Format adjustment: Manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Particularities: - Solid construction with high precision - Suitable for ...
Butter Forming & Wrapping Machine Manufacturer: Trepko Type: XPG40 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k
The Vax Commercial VCSD-05 is a battery-powered floor mopping machine with a capacity of 75 liters. The two 400 W brushed motors are powered by two 12 V batteries with an output of 76 ah/h. The batteries have a capacity of 3 hours, the charging time is 8 hours. The VCSD-05 is a compact floor mopping machine with a cleaning width of 660 mm. Brushes are available as a matching VCSD-05 floor brush or as a floor pad in conjunction with a VCSD-05 driver board. Due to its compact dimensions, this floor mopping machine can also be easily transported to different floors by elevator. Used cleaning machines from Heratec are all tested for functionality, cleaned and, if necessary, overhauled. Specifications: Manufacturer: Vax Type: Commercial VCSD-05 Condition: used/good Motor (Suction:) 400 W Motor (brush): 2x 400 W Capacity wet: 75 liters Capacity extraction: 80 liters Chargin ...
The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the ...
Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK
Textile cleaning machine Multimatic PIUMA N 320 with distillation module VD 160 Commercial washing machine, used from 2019 Manufacturer: Multimatic GmbH & Co. KG, Maschweg 72-74, 49324 Melle, Germany, e-mail infomultimatic.de, Tel. +49 5422 100-0 Year of Make: 2019 Operating hours read: 4,854 Batches read: 5,923 Description For solvents trade name "Sensene" Drum volume: 320 liters Filling quantity: 16 kg with a filling factor of 1:20 Easily accessible, compact machine platform Basic machine/basic module (W x D x H in mm): 1076 x 1990 x 2140 (990 x 1990 x 1980 mm simply dismantled) Machine structure: - High-spinning, free-swinging drum unit - Resonating tank assembly, consisting of 2 stainless steel tanks with a volume of 80 and 90 litres, to compensate for the kinetic energy during spin-up and to prevent dirt deposits - Tank bottom with double slope - High-quali ...
Machine info: Year of construction: 02/2025 Capacity: 60kg Machine Weight: 360kg Production of tempered chocolate: 130kg/h Connection: 16A CEE plug Dimensions: Width 900mm, Depth 920mm, Height 1550mm Description: The Model MAESTRIA60 tempering and coating machine is designed for tempering and coating all types of chocolate. Thanks to its small dimensions, the tempering and enrobing machine is MAESTRIA60 particularly suitable for versatile use in confined spaces. Continuous temperature control by a screw with the help of a cooling unit ensures that the chocolate is always available at the right temperature, ready for use. The machine has a heated dosing device, which is controlled by a pneumatic three-way valve, so bars, chocolates and other products can be dosed directly into moulds. By equipping the machine with the appropriate coating attachment, all confectioner ...
Make Benhil Model: 8311 Junior Usage: Butter filling & wrapping Capacity: Up to 40 packages/min Product weight: 250 g Hopper with 2x screw augers Aluminium hopper and augers & Stainless Steel Hopper Condition : Good
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
Machine: Benhil Multipack 8304 mini portion Capacity: up to 110 packets/min Pack size: 7,5, 10, 12,5 gram Dimensions: 30 x 40 x height adjustable max 20 mm Product: Butter / Margarine Wrap material: Aluminium foil Dimensions: Approx. 200 x 150 x 200 mm (l x w x h) Weight: 1.400 kg (gross) Electricity: 1.1 kW
Eyeletting machine Hang Model 101-Piccolo III Year 2000 ? Available direct
ID3598 Geotec Rotomax L year/Baujahr 2012 Crawler drilling rig, drilling mast stroke length 4300 mm, pulling force 46.5 kN, contact pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shock tongs, support clamp 50-324 mm diameter, cable winch, centrifugal pump, mast extension 810 mm Crawler drilling rig, drilling mast stroke length 4300 mm, tractive force 46.5 KN, pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shocking pliers, interceptor clamp 50-324 mm diameter, winch, centrifugal pump, mast extension 810 mm
McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.
used
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg
1 of used film-only multi-packer, make KHS, type Innopack Kisters SP 050 B2, new 2013. Operating side: links. Used for PET bottles 250/500 ml as 3x2=6-packs (dual lane) and 6x2=12-packs as well as 6x4=24-packs (single lane) in clear or print-registered film. Quick change-over via servos and spindles. Capacity upto 50 cycles per minute. Siemens S7 controls.
AMADA EUROPE 255 CNC punching machine was built in 2004 in France by AMADA EUROPE S.A.. The machine, designed for machining thin sheet metal of a maximum thickness of 3 mm, is distinguished by its high efficiency and reliability. In order to obtain the highest precision of the produced parts, all the machining processes are performed on a large brush table. This table, thanks to its design, prevents scratches and nicks on the sheet metal during the material feed, and also significantly reduces the noise level. The EUROPE 255 punching machine is also offered with extensive equipment, including e.g. a cooling unit, light curtains and an advanced GE FANUC CNC control. The total weight of the machine is 11000 kg. Technical specifications of the AMADA EUROPE 255 punching machine - maximum press force: 20 t (200 kN) - feed in the X/Y axis: 1280/1320 mm - feed rate in the X,Y axis: 82 m/m ...
AMADA VIPROS 2510 KING CNC punching machine was built in 1998 in Japan by AMADA CO., LTD. The machine, distinguished by its extensive machining capabilities, is an excellent choice for the production of precise parts with the highest quality. It is capable of punching holes in sheet metal made of, among others stainless steel and aluminium, with a maximum thickness of 6.4 mm. The machining process is performed on a large brush table, which prevents scratches and scrapes on the sheet surface, and also significantly reduces noise level. All this is completed by an intelligent FANUC CNC control in which the most advanced machining programmes are created in just a few steps. The AMADA VIPROS 2510K punching machine weighs 11000 kg. Technical specifications of the AMADA VIPROS 2510 KING punching machine - CNC control: FANUC Series 18-P - maximum press force: 20 t (196 kN) - feed in the X ...
The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...
Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.
CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...
No 2 circular blades motors HP 3 - 2800 rpm No 5 drilling units motors HP 1 - 2800 rpm No 1 conveyor belt feeding machine HP 0,5 - 1400 rpm Pneumatic movements with hydraulic brake Stacking / Destacking device with pneumatic cylinders Electro-pneumatic machine control with PLC: Overall dimensions: -Length Mm: 2500 (useful for cutting and drilling) -Height Mm: 1400 -Width Mm: 1800
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
Parts cleaning system Industrial washing machine degreasing made entirely of stainless steel! Manufacturer Render Type W175 Built: 1994 5 loading trolleys with 5 washing baskets, Basket size 1,125 x 1,125 mm Manual workstation with viewing window on one side with integrated high-pressure cleaner. Machine to be loaded/unloaded from both sides! Machine comes from an operating resolution and was in use until dismantling. Tank capacity approx. 2,000 litres, oil scimmers, filters, high-pressure pumps... Vertical door opening (lifting doors) on two opposite sides. This allows you to load on one side and unload on the other side. Due to the very high inner height, the system offers an optimal possibility to accommodate both very heavy laundry material as well as parts with large dimensions.
Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active
Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm
Universal Materials Testing Machine Manufacturer: Lloyd Type LR5K MK 4 Serial No. 102894 Lloyd Instruments Sold with: -5000N Force Transducer (new) -Force transducer 250N -50N load cell -Manuals and CDs -Computer complete with screen -Software Technical configuration: -Load range: 10N - 5kN -Force measurement accuracy:
running direction: right - left for 28 mm VacuVent closure with safety housing
Pass width mm: 1300 02 Engines KW: 1 + 1 02 Brushes Brush diameter mm: 300 Vacuum table Control cabinet KW: 8.5
Grinding units Grinding belt length mm: 8000 Grinding width mm: 120 Feed max: 2200 m/min Manipulation unit Max machining range mm: 2100x650x400 Total connection kW: 7.2
Optical sorting machine with material feed (via 2 stainless steel infeed hoppers and 2 electronically controlled vibratory chutes), material chute (made of specially coated aluminium), optical unit (4 high-resolution monochrome cameras with 2,048 pixels each; integrated image processing with a resolution of 0.09 mm) and blow-out system (144 high-speed blow-out nozzles with 1,400 cycles per second). The machine can be used, for example, to remove particles of different colours or foreign bodies from a material stream. Throughput: 500 to 800 kg/h (for quartz sand 0.1 - 6.0 mm). IP6X protection class for dustproof operation; incl. connection for external dust removal. Dimensions: 1.4 m wide x 1.8 m deep x 1.90 m high.
Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970
Pass height max mm: 2000 Battery: 24V Chargers: automatic and high-frequency Automatic reading of the charging height: Reflective light barrier Total power: 0.75 KW
MACRI ITALIA PROVAR 6-45 U-D tube and profile bending machine was built in 2015 in Italy by Macri Italia srl. The machine, designed for precision bending of tubes and profiles with a maximum diameter of 45 mm, is an answer to the daily challenges of modern business. The machining process is performed by means of a moving head with reinforced gears, which allows the bending of standard and variable radiuses in 6 axes (X,Y,Z,B1,B2,A). Each axis, in turn, is driven by brushless servomotors, which ensure the achievement of high dynamics, combined with excellent positioning accuracy. The machine’s extensive range of equipment includes e.g. state-of-the-art MACRI software with many useful functions and the ability to run a anti-collision test with 3D simulation. The PROVAR 6-45 U-D mandrel bending machine weighs 4000 kg. Technical specifications of the MACRI ITALIA PROVAR 6-45 U-D tube be ...
Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 4 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) 01 Orbital grinding unit "Spinbrush" - KW 4 (INV) 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) Machine Control: Viet "IPC 15" Touch Screen Blow-off device 1 Blow-off device 2 Vacuum table Scotch Brite Weight KG: 7200
maximum number of results exceeded
please refine your search
