combi used for sale

MAN 3262 E302 275-550 kw electric power, 50 Hz plug and play units IN/Outdoor Container . All info in request PM Thanks previously advance

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Vacuumatic Cuti strip inserter; good condition; cleaned and tested; Lance 600mm; Stand 150cm; Connection cable for direct connection to end devices; optionally with laser sensor for free use. Tab inserter Vacuumatic Cuti; good condition; cleaned and checked; chute lenght 600mm; tripod 1500mm; cable for connection to end device; option with laser sensor for stand alone.

Muhr & Bender KBL 65-30 Optima B profile punching machine Type KBL 65-30 Year of construction 1975 Central lubrication Electrical triggering of the movement via foot pedal 5 tool stations Stop for long material Punch Punch 30mm in 17mm 24mm in 21mm Quick-change device for stamps Profile scissors 1. Z-profile 90° 140mm 2. Angle iron 90° 130x12mm 3. Square aisles 50mm 4. Round iron 55mm 6. T-iron 180mm 7. U-iron 90° 180mm 8. T-iron 90° 100mm Bar steel shears for material 45kp mm² strength 1. Flat iron up to max 60x28mm or 120x18mm 2. Angle iron 80x10mm 3. Square aisles 40mm 4. Round iron 45mm 6. T-iron 80x10mm 7. U-iron 100mm 8. T-iron 100mm Plate shears 1. with knife 13° = 13mm 2. with knife 2.5°= 140x9mm / 220x8mm 3. with knife 5° = 140x13mm / 220x12mm 3 phase current.- Frequency 50 Hz / 4 ...

The combined cycle plant consists of a gas turbine, waste heat recovery boiler, steamturbine and a generator, mounted in a single shaft configuration. The capacity of the installation is 53 MW • The prime mover of the installation is an aero derivative General Electric LM6000-PB-DLE. 40 MW - 30,000 hours remaining till next major overhaul - Running hours 74.100 hours , start 3356 - Next overhaul in 5000 hours(hot gas path) - Next major overhaul: in 30.000 hours • The Steam Turbine is a SIEMENS ENK40/53-3, with a capacity of 13 MWe. Dismantled, stored and ready for transport.

- flat pile feeder - 1st station with 4 buckles - 2nd station with 4 buckles - Gate fold - Mobile cross fold station - stream delivery

SPECIFICATIONS: 5 machining operations: - Planer planer - Thickness planer - Spindle milling machine -Saw -Milling machine

SPECIFICATIONS: Combined dresser-thickness planer 2 work tables Length: mm 2000 Working width: mm 400

#4351 Horizon AFC 504 AKT Size: 490x648mm; min. 120x172mm Age: 2000 - 4 Pockets - 1 knife -Delivery

STAHL FOLDER TF 56-44- FE -Year 1991, paper size max 56x95 cms. -High pile delivery with Tremat -Four buckles in first station with anti noise hoods -Four buckles in second station -Counter, air pump -Delivery, All rollers in nice conditions -In production, Available at the end of January

4-fold combined profile steel shears PEDDINGHAUS type Peddy Masch. No. GJ 4405 Year of construction 1970 Notching device: rectangular notch 40 x 40 to 7 mm sheet steel Punch dimension 40 x 50 mm - stroke rate 40 strokes/min. - Table support 750 x 260 mm Profile steel shears: Profile shears at 90 angles 70 x 70 x 7 mm Profile shears at 45 angles 50 x 50 x 6 mm Bar steel shears:Cutting capacity round 28 mm Cutting capacity square 25 x 25 mm Flat steel shears: Cutting capacity max. 10 mm cutting capacity flat 80 x 6 mm- blade length 175 mm- usable length 135 mm - shear angle approx. 2 motor power 1.5 kW mains connection 380 volts, 50 Hz. - mechanical stroke tripping - bogie with material support Space requirement L x W x H 1200 x 750 x 1700 mm Weight 500 kg good condition; used

MWM Motor Generator used on base frame MN : 61612001501 E 60 in 2020 incl. new camshafts

As good as new Sokratherm CHP GG100

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

Large linear combination weigher, 13 5.0 liter weighing heads, for various kinds of big volume products: fruits, vegetables (potatoes, carrots, tomatos, oranges, mango, etc.). Also suitable for frozen food, such as fish or meat. - Specifications: weighing range: 200g-5kg | max. speed of the machine in neutral: 80 cycles/minute. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Very large weigher specifically for fresh/humid fruits, meat, vegetable etc. - Weighing unit with 8 linearly arranged weighing heads, memory hopper for a higher accuracy and speed , spiral conveyor supply. Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: stainless steel | protection class IP65 | max. speed of the machine in neutral: 45 cycles/minute | weighing range 10-2500g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All  ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 45 cycles/minute | accuracy: +/- 0.1-3.0g | hopper volume: max. 1l | weighing range: 10-2000g | power: 220V, 1.5kW | stainless steel | IP64 | machine dimensions and weight: L2320xW840xH1820mm, 350kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In additio ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | accuracy: +/- 0.5-2.5g | hopper volume: max. 0.5l | weighing range: 20-500g | power: 220V-240V, 1.5-2.0kW | stainless steel | IP54, weighing heads and memory hopper are made of polypropylene | machine dimensions and weight: L1294xW789xH1100mm, 320kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 d ...

This is a Sokratherm CHP GG202 with approx. 10500 operating hours at 829 starts Location Berlin

Size max: 738 x 1100 mm Size min: 210 x 297 mm Longest fold: 560 mm Shortest fold: 35 mm (58 mm at pocket 1) Paper thickness: 40 - 250 g/m2 Staplehight: Palet feeder: 1200 mm - PFU-74F pallet feeder - Touchscreen Monitor - Automatic setting - 1. Station 6 folding pockets 2. Station 1 knife plus folding pocket left 3. Station 1 knife - Downstream slitter shafts in the first and second folding unit - electron. Ultrasonic-double sheet control - Creasing and perforating device - PSX-56 High-Perfomance Package Delivery

Natural gas CHP with 20 kW electrical power of the company KW Energie. Koplett with acoustic hood and external sound absorber

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h

Hammer C3 31 Station wagon With format sliding table 2m Saw blade 250-315mm Swivel: 90°-45° Planer width of 310mm 3 automatic blade planing shaft Passage height from 4-225mm Milling machine: 90°-45° swivel backwards Milling machine: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Motor power: 3 motors 4KW 400V G&2825-O1852

If you are planning to exchange your old Vacuumatic Cuti 1 for a younger one, you should not miss this bargain. We have 4 unused Cuti 2 from 2021 on offer, all accessories such as stand, sensor or interface cable can be taken over. If you're planning to swap out your old Vacuumatic Cuti 1 for a younger one, don't miss out on this bargain. We have 4 unused Cuti 2 from year 2021 on offer, all accessories such as stand, sensor or interface cable can be taken over.

I am selling a Combined Machine Sliding Table Saw with Scoring + Milling Machine Manufacturer: FELDER Austria Model: KF700S. Built in 2011. Cutting length 3200mm. Saw blade and milling swivel 0-45° manual Saw blade and milling digital height adjustment Digital display of rip fence and working heights Insertion of the main saw blade and scoring machine from the aluminium format table. Main motor sliding table saw 3.0 KW / (3200/4500/5800 rpm adjustable) Scoring motor sliding table saw 0.75 KW Main motor milling machine 5.5 kW Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Weibert HX 260-CE 5-fold station wagon Motor 3x 3HP, 400V, 50Hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Milling mandrel 3000/6000 rpm Sliding table 1450 x 320mm Cutting length 1200mm Mitre stop Eccentric clamp Weight: 485kg G&RO-HX260-CE

Distform combisteamer, year of construction: 2016, 400 V, 50 Hz, 7000 watt,6 floors, floor dimensions: 525 mm x 325 mm, total dimensions: 820 mm x 580 mm x 710 mm.

Rational combisteamer, model: FCM 201, serial number: E21MG10012205623, 400 V, 3 Ph, 50 Hz, 37.0 kW, dimensions: 900 mm x 900 mm x 1870 mm. Including s/s trolley, 20 floors, floor dimensions: 530 mm x 330 mm, total dimensions: 750 mm x 480 mm x 1800 mm.

Complete overhaul in 2021; equiped with Deutz 4 cilinder diesel engine; loading capacity approx 31./1,7m3; no our or odo meter read out; no registration; does not start(battery empty/defect and ignition switch defective) ; This lot can only be viewed by appointment; make an appointment via administratie@aldel.nl; only on the dates February 14 and 15, 2024

Complete overhaul in 2021; equiped with Deutz 4 cilinder diesel engine; loading capacity approx 31./1,7m3; no our or odo meter read out; no registration; does not start(battery empty/defect and ignition switch defective) ; This lot can only be viewed by appointment; make an appointment via administratie@aldel.nl; only on the dates February 14 and 15, 2024

For tools with cylindrical shank (for KHE 32) Chuck span : 1 - 13 mm

Capacity cutting solid square / solid round 30 mm; cutting capacity 300x10 mm / 200x13 mm; punch capacity 28x13 mm; cutting angle line capacity 45° 100x100x10 mm; capacity cutting angle line 90° 80x80x8 mm; unloading 175 mm; including various accessories / parts in pallet box including 3 boxes with top and bottom punching;

Punching capacity: 28x15mm. Including handbook

Natural gas CHP units available Jenbacher JMS 312 GS-B02 Year of construction: 1994 Power electric: 470 kW Thermal power: 618 kW Generator: Stamford HC 634 H2, 910 kVA Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 1/min Operating hours: approx. 84000 Last overhaul at approx. 45000 operating hours Includes heat exchanger, control cabinets Subject to prior sale - errors possible Ref. No.: E-0913

With bottom running belt for bread production

We offer two pieces of MWM TCG 2020 V12 for sale. Specifications Engine: MWM Type: TCG 2020 V12 Power: 1235 kW Year of construction: 2012 Generator: Marelli Power: 1850 KVA Voltage: 400 V Operating hours: 65,000 h

Key data: 480 , 600

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, control panel, complete.

Technical details on demand.

With feeder and destacker Wemhöner 184.

Key data: 330 , 413

Liebherr gas generator in good condition. It has the following specifications: Manufacturer: liebherr Fuel: Gas Manufacture year: 2013 Kva: 413 Kw: 330 Other specs: 8 cylinder, Control panel included. Complete.

Weibert W7-32 5-fold station wagon Planer width: 320mm Cutting length 1700mm Milling stop for tool max. D=220mm 3 motors 3kW Price 5967,-€ excl. VAT Price 7100,-€ incl. VAT