We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,050 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Combination steamer Küppersbusch KEG 0109, built in 2008, in a very good used and functional condition. Universal device for cooking, baking, frying, cooking, regenerating. 40 bays 1/1 GN, horde trolley, programmable digital control. Dimensions B/D/H 120/95/180 cm. Connection values 400 volts, 62.3 kW. Workshop-tested, ready for immediate use. Further on request.
Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers
used
We offer two Deutz/MWM type for purchase: TBG 604 CV16. The CHPs ran flawlessly until they were decommissioned. Scope of delivery: engine, generator, control cabinet, gas section, exhaust heat exchanger, silencer and documents.
used
Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.
used
CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...
used
Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN
used
Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear
used
Nozzle tube system(s) three-dimensional Basket diameter 600 mm Basket load 100 kg Usable internal height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - Weekly timer - Water deficiency protection - Chip/particulate filter with bath cover plate - Vapour extraction Automatic level replenishment: - automatic level supplementation Function blowing off / drying: Pulse compressed air blow-off three-dimensionally Lye care: Disc oil skimmer – discontinuous oil discharge – For floating/demulsifying oils Bag filter system type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺAfterʺ Filtration Emptying and cleaning the system (occupational health and safety): Pumping device/flushing of the tank bottom Hose/nozzle in aluminium/plastic Option – AM execution: AM version for additional manual cleaning (high ...
Combined heat and power plant with Ford gas engine 12 kW electric complete with heat release and sound insulation hood B&R Control Water-cooled asynchronous generator
used
1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery
used
Power: 105 kW Mains voltage: 400 V Frequency: 50 Hz Speed: 1500 rpm Generator: Marelli MJB 250 MA4, 165 kVA Engine hours: Approx. 60000 Turbocharger is new, generator was renewed in 2019 As a replacement unit, the unit has a water damage: Liebherr DITOM TBG 926 Built: 1999 Subject to prior sale - Errors possible
new
Weibert FR3 Engine power: 400V 3 kw 4 hp,2 engines Format sliding table: 1500mm Cutting height: 103mm Saw blade: swivel, max.315mm Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm.
new
Weibert FR2 Format circular saw - milling machine Format sliding table: 2600mm Cutting height: 103mm Saw blade 90°-45° swivel Pre-scratcher: separate drive Milling spindle: swivelling Milling rpm: 1400/3500/6000 and 8000 min. Engine power: 5KW 400V 50HZ S1 Integral safety rails 500mm Left and right run Suction pipe with suction hose Gradraster system on the boom G&WJ-SÄ-FR2-2.3 Option:3.0/3.2m Option: Sliding table 3.2m
new
Aluminium format slide (anodized) with hardened Steel guide rods. Non-return protection at thickness planer. Anodized parallel fence with micrometric fine adjustment. Inclined adjustment of the saw blade up to 45° by means of a hand wheel. Table opening ø190 mm with undercounter extraction. Milling stop 180 mm. Built-in milling spindle lock. Layout table with telescopic stop, Eccentric clamp, degree grid made in EU ! Dressing unit: Table width 410 mm Table length 1800 mm Planer shaft diameter 100 mm Number of planing knives 4 pieces Shaft speed 5000 Motor output power 5 kW S6 400V (4kW S1) Thickness unit: Thickness passage, min/max 4 - 230 mm Feed speed 7m/min Milling machine: Usable length of the spindle 125 mm Spindle height adjustment 160 mm tool diameter for profiling 180 mm for tenon cutting 250 mm Spindle speed 8000/6000/3500/1400 Table openings 1 ...
new
Weibert NX 310 PRO-CE 5-speed station wagon Motor 3x 3,7 KW, 400V, 50Hz TERSA -Knife planing width 310mm Numerical display of the planing height Dressing tables swivel to the machine side Saw blade diameter 315 mm Cutting height 107mm to 90° Cutting height70mm to 45° Milling manduck 2900-4000 6000-7500 rpm D=30mm Sliding table 2100 x 320mm with extender Miter stop Eccentric tensioner Table extension with swing-off device for feed Weight 585kg G&RO-NX310-PRO
used
Sale of Moog RKP 80 + Voith internal gear pump. Exact type of lashing pumps: Moog 2518218727 + Voith IPC / 5/50. The Moog pump has 80 cm3 and the Voith pump 50 cm3. The pumps run approx. They've spent 3,000 hours on pure oil, so they're new.
used
Sell a new pair of hydraulic pumps, Moog RKP 63 + Moog RKP 45 pumps. Exact type of connected pumps: Moog HP-R18B1-RKP063 + Moog HP-R18B1-RKP045. The pumps also include electrohydrautic controls. The pumps are new, not yet mounted.
used
max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
width of the strips: 100 mm band length: 610 mm work table:: 170x125 / 265x150 mm : 16 mm turning speeds: 2000 U/min roll diameter: 16, 23, 29, 41 und 53 mm total power requirement: 0,45 kW weight of the machine ca.: 114 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Combination laser punching FINN POWER LB6 Year 2003 3000x1500
used
complete 230kW
used
We offer a Liebherr G944 for sale.
used
Fumktionstüchtig
used
We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne
used
We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne
used
Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.
used
Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!
used
Make LB. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter
used
5-fold combined dressing and thicknessing machine, circular saw, milling machine and Slotted Hole Drilling Machine Frommia Type 261 UB Dressing, joining and thicknessing planers Planing width approx. 410 mm Planing thickness approx. 1- 185 mm Dressing table length approx. 1550 mm Thickness table length approx. 700 mm Knife shaft diameter 100 mm with 2 knives Speed of the knife shaft approx. 5200 rpm. 4 feed speeds approx. 5, 9, 12, 18 m/min. Motor approx. 4 kW Drill Drilling depth approx. 120 mm Slot length approx. 200 mm Height adjustment approx. 80 mm Table size approx. 180 x 320 mm Circular saw and milling combination Table size approx. 800 x 600 mm Diameter of saw blades 150 – 300 mm Max. cutting height approx. 95 mm Diameter of the saw shaft at the clamping part 20 mm Speed of the circular saw shaft approx. 3600 rpm. Motor power approx. 1.5 or 2.2 kW ...
used
CHP MAN E2866DE Year of construction 1988 Gas engine 106KW with Piller Generator 120KW Electrical power in used condition for sale. Without guarantee or warranty to traders. Not tested.
used
1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005
used
Make Shoei Model SPT52-4K Year 1997 Minimum size 120 x 135 mm Maximum size 520 x 850 mm Configuration Feeder Flatpile feeder with sheet seperator head 1st station 4 plate buckles 520 mm 2nd station 1 knife Shoei52 Delivery belt delivery Minimum fold 65 mm Details with batch counter, noise hoods, vacuum pump Condition very nice machine, very good rollers !
new
SCM st 1g Format circular saw milling machine Format sliding table in 1.2m Cutting height: 67mm 90° 40mm 45° Auslegertich kpl. Cutting width 700mm Saw blade: swivel 45°, max.250mm 1.8KW 2 motors 400V 50HZ Milling machine: rigid 90° Milling machine rpm: Speeds: 5000/7500 rpm. Milling stop max tool diameter max. 160mm Suction pipe 60 - 120mm Weight 190kg Eccentric tensioner G&STÜ-5501048
used
1 aseptic SIG Combiblock carton filling machine Type: CB 510 Int. Designation: Combiblock Line 4 Power: 10,000 pcs/hour Standard formats: 500ml, 750ml and 1,000ml Format changeover within 2 min without Replacing parts With 3 packaging paths next to each other With valve nodes With all surrounding machines to Production of aseptic packaging with screw cap Energy consumption: Electricity: Approx. 50 kWh Compressed air: 6 bar, approx. 70 Nm³/h Water Drinking water quality: approx. 400-600 l/h Steam: Saturated steam 4-16 bar, min. 60 kg/h, Temp. min.154°C , consumption production with steam injection, 10-14 kg/h Pack sterilization with H2O2: Consumption at lfd. Production: approx. 3.6 l/h. Installation dimensions for the SIG machine LxWxH: 7,500 x 3,300 x 4,400 mm free Ceiling height. Complete space requirement with carton packer and screw cap application t ...
new
Spray drying booth L8000mm, W4000mm, H2600mm All applicable standards 28.000m³/h in-blow-out Lacquered temp. 20°C Drying temp. 70°C Direct gas burner 300KW Stun, filter, grid assignment, Lighting.
used
- Including SheetMaster - Resonador is not in use, pending revision - Working area laser (X x Y): 2.585 x 1.650 mm - Working area punching (X x Y): 3.085 x 1.740 mm - Working area punching / laser (X x Y): 2.585 x 1.650 mm - Simultaneous positioning speed: 108 X+Y m/min - Max. workpiece weight: 230 kg - Punching force: 220 kN - Punch diameter max: 76,2 mm - Control: SIEMENS SINUMERIK 840 D - Material thickness (punching) max: 8 mm - Axis speed [X axis] max: 90 m/min - Axis speed [Y axis] max: 60 m/min - Laser Output: 2,4 kW - Laser Type: CO2 - Machine ON Working hours: 63.909 h - Beam ON Working hours: n/a - Number of turret stations (pcs): 18 - Consumption values CO2: 1 l/h - Consumption values He: 13 l/h - Consumption values N2: 6 l/h - Weight: 23.000 kg - Dimensions (long x wide x high): 8.700 x 7.800 x 2.400 mm
used
We offer three Jenbacher J 616 GS E 02 for sale. Specifications: Engine: Jenbacher Type: J 616 GS E02 Power: 2495 KW Year of construction: 2007 Generator: AVK Type: DIG 140 k/ 4W Power: 3013 KVA Voltage: 10 KV Frequency: 50 Hz Year of construction: 2007 Scope of delivery: complete system, except transformer and table cooler
used
Siemens AXIOM Iconos R 200 as spare parts dispenser with the following system components: Generator Polydoros SX 65/80_Model No. 8609364 X2217 m. Bedienpult_Model No. 3157554 X2076 Tube Optitop 150/40/80 HC 0,6/1,0, Tiefenblende_Model No. 10092618_Bj. 01/2017 digital image processing Fluorospot Compact_Model No. 7144434 Gerätesteuerpult_Model No. 7030708 G5478 Image intensifier 40 cm_Model No. 3828832 V5092 Handauslöser_Model No. 9722059 G5455 Monitor Simomed HM 44_Model No. 2323464-2_Bj. 2006 Flat screen monitor Acer_Model No. V193 B_Bj. 2009 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EX ...
new
SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!
used
Hobart 305 G Dry Steam Quick Cooker The Hobart 305G Dry Steamer offers the chef fantastic portion management and the ability to reduce waste through the speed of cooking – 5 times faster than traditional cooking and 5 times more cost-effective. Execution: Gentle, healthy cooking: Steaming, steaming or blanching Electronically controlled program sequences Digital and analogue chamber pressure display Automatic defrosting Automatic boiler emptying with drain pump Automatic self-cleaning Exhaust steam destruction with vapour condensation Self-diagnostics with fault indication Time Entry Control Operation via sensor buttons 3 pressure cooking stages: 0 / 0.5 / 1 bar 0.0 bar at approx. 60°C – 99°C (manually adjustable) 0.5 bar at approx. 111°C 1.0 bar at approx. 121°C Manufacturer: Hobart Type: Dry Steam Quick Cooker Model: 305 G Series: 5 ML No. 305G-31 U ...
new
Weibert CU-41 Combine With format sliding table 2,60m Saw blade 250-315mm swivel: 90°-45° Planing width of 410mm 4 knife shaft reversible knives (no more adjustment) Dressing table length of 1800mm Passage height of 4-225mm Milling machine: 90°-45° swivel backwards Milling machine rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Motor power: 3 motors 4 KW 400 V WY-500300 ILLUSTRATIONS WITH SPECIAL EQUIPMENT, IF APPLICABLE
new
Weibert W7-41 Station wagon Planing width : 410mm Motor power: 3 motors 400V 2.2 KW Dressing table length: 1500mm Planing shaft: 3-reversible knife shaft Passage of 4-230mm Format sliding table 1500mm Cutting height: 103mm Saw blade 315mm swivel 90°-45° Milling machine: rigid 90° Milling machine rpm:1400/3500/6000 and 8000 rpm WY-500400 Illustration similar!
used
Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.
used
max size: 52 x 84 cm min size 10 x 14 cm - flat pile feeder - Tremat - 1 Station with 4 buckles - 1 knife - standard delivery
used
MAN 3262 E302 275-550 kw electric power, 50 Hz plug and play units IN/Outdoor Container . All info in request PM Thanks previously advance
used
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Vacuumatic Cuti strip inserter; good condition; cleaned and tested; Lance 600mm; Stand 150cm; Connection cable for direct connection to end devices; optionally with laser sensor for free use. Tab inserter Vacuumatic Cuti; good condition; cleaned and checked; chute lenght 600mm; tripod 1500mm; cable for connection to end device; option with laser sensor for stand alone.