We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,786 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
here a super good combi oven, both with steam. Stove with setin plates. for 60x80 trays. Oven cleaned and tested. With trolley for sheet metal. Dimensions: 90x90x210cm
used
1 Gebr. Low Pressure Steam Boiler -------------------------------------------- - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : U-ND 500 Power approx. : 500 kg/h Operating overpressure : 0.5 bar Test overpressure : 2 bar Water capacity full approx. : 770 l Year of construction : 2005 equipped with Weishaupt combi burner gas&oil, GL3/1-E, ZMD, 90-630 kW, 15-500 mbar, oil flow rate 16-53 kg/h, gas control system, Control cabinet with C7 control, feedwater pump and the existing coarse and fine fittings.
used
1 Gebr. Boiler ------------------------------------ - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : UL - S Heating surface approx. : 80 m² Capacity : 4,000 kg/h Bish. Ab. Operating overpressure : 10 bar Increased test overpressure : 18 bar Water content at NW approx. : 5.930 l Water capacity full approx. : 8.020 l Year of construction : 1994 equipped with Weishaupt combi burner gas&oil type RGL 10 / 1 - D, ZMD version, separate control cabinet, feedwater pump and the existing coarse and fine fittings.
used
Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for ...
used
pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...
used
Key data: 1360 mm, 1 , 150 mm
Wide belt sander belt sander veneer sander OTT Type: ALPHA 136 one belt combi unit - Calibration loops via roller - Fine grinding with rigid sanding pad - Veneer grinding with insert-controlled air shoe Sanding width up to approx. 135 cm Passage height approx. 3 - 150 mm Cleaning brush at the outlet Motor power 11 KW Total power approx. 13.3 KW Belt speed 18m/sec Feed rate max. approx. .8m/min Dimensions approx. 2.06 x 2.0 x 2.1 m Weight approx. 2600 Kg The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measuremen ...
used
feed pressure: 7 bar liter capacity: 1000 l/min operating pressure: 10 bar total power requirement: 7,5 kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 2,4 x 1,0 x 1,9 m combi srew compressor with dryer and tank - drying - Tank - noise lvl. 72 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/60-40 J-EB 2/20 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty
used
Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/60-30 J-EB 2/20 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty Many more winding machines in stock!
used
General SKULU001 LocationNetherlands MakeALTOP kunststoftechniek TypeScrubber Stripper combi skid Year of construction2017 Main Features Capacity3000 Ltr./Hr. Specified Features - Scrubber CapacityStripper liquid: 3,0 m3/h, Air flow: 7200 m3/h, Ammonium 9,9 kg NH3-N/h Vessel sizesStripper Dia: 1000 mm Number of columns:1c stripper, 2pc scrubbers With stirrerflux mixer With pumpcheck Information With switchgearcheck Total height8,0 m CEcheck Floorspace6,0 x 3,3 m Extra SpecificationsThe system consists of the following main components: - Scrubber 1 - Scrubber 2 - stripper vessel - Process water supply by means of valve ABV403 - Acid dosing by pump PU501 - Ammonium sulphate removal by pump PU303 Objective: neutralise ammonia vapour generated in the stripper. Sulphuric acid dosing will convert ammonia into ammonium sulphate. The ammonium sulphate will be pumped to an ext ...
used
General SKU259T443 LocationBarneveld MakeLock inspection system LTD TypeMetalchek 30+ No.7001 Year of construction2001 Main Features MaterialStainless steel Specified Features - Metal detector MaterialStainless steel 1.4404 (316L) Metal detectorcheck Tunnel sizes95x38x225 mm Product space95x38 mm With motorcheck With hoppercheck Inlet95x38 mm Outlet95x38 mm Information Mounted on framecheck Mounted on wheelscheck Total height1,3 m Weight235 kg CEcheck Floorspace0,8x0,9 m Extra SpecificationsPharma Technology, tablet deduster, type combi 1200 li, inlet height 730-830 mm, outlet height 1490-1590 mm, Outlet chute diameter 60 mm Tablet size diameter 4-25 mm capacity: 150 000-2 000 000 tabs/h Mirror finish Metal detectorsLock Inspection SystemsPackaging machines > Metal detectorsBrand > Lock Inspection Systems What you can expect from Foeth: -- Machine is in working ...
used
General SKU316S1019 LocationBarneveld MakeMettler-Toledo Garvens GmbH (D) TypeXS 3 CC COMBI No.35003448 Year of construction2012 Main Features MaterialStainless steel Dia/Width240 mm Specified Features - Metal detector MaterialStainless steel Metal detectorcheck Tunnel sizes210x240 mm With conveyor beltcheck Belt width200 mm Belt length1980 mm With motor24 Volt Belt speed70 m/min With hopper(frequency regulator) Inlet210x240 mm With air pulse ejectioncheck Outlet210x240 mm Information Mounted on framecheck With switchgearcheck Total height1,8 M Weight580 Kg CEcheck Floorspace1,2x2 M Extra SpecificationsMachine is now tuned for maximum 100 mm wide and 150 mm high product. : Metal detectorsMettler ToledoPackaging machines > Metal detectorsBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared ...
used
Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers., Capacity: 120 hl/h, Plate size: 100 cm edge length, Length: 7000 mm, Width: 1500 mm, Height: 1500 mm, Position: horizontal, Base construction: mounted on steel frame, standing on feet, Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates
used
Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...
used
CM35 AdvancedLine Checkweigher: Customer-specific sorting, MID conformity 1st stage, infeed conveyor, collection container, outfeed conveyor, covers, FreeWeight Nt incl. statistics, HMI 15" incl. AdvancedLine software, multi-resolution load cell, pusher, signaling device, weighing technology EMFR load cell, user management, machine status monitoring, sensor monitoring, emergency stop button, Tesco Standard 2 sorting Profiles LS Combi Metal Detector: opening width 350 mm, opening height: 150 mm, operating sequence: 100/300/800,
used
Key data: 1100 mm, 1
Wide belt sander model AWS 1100 combi working width 1100 mm brush unit year 88
used
Metos Proveno 300SM combi kettle 2016, stainless mixing kettle with scrape surface, 300l capacity, temp range 0 -120'C, heavy duty stainless hinged safety lid, HMI touch screen controls, 2Kw
used
- CP 2000 - Preset feeder - Alcolor Vario dampening units - Technotrans Combi (water cooled) - Alcosmart AZR - Ink temperature control - Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Perfecting 2/4 or 6/0 - Coating unit with chamber blade - ScrollStar Atlas Copco - HD IR + HL dryer - Grafix Exatronic powder spray - without outdoor chiller
used
Key data: 1100 mm, 2 , 160 mm
Here we offer a massive Ott wide belt sander for sale. Technical data at a glance: Ott wide belt sander MEGAtr 11 built in 1996 Grinding width 1100mm Workpiece thickness min: 3mm max.160mm Abrasive belt dimension:1120x1900mm Abrasive belt speed 18m/sec Feed speed 5/10 m/min Motor power: 11 kW 2-Aggregates: Calibration roller Combi unit with shoe
used
Rational SCC202G Combi oven 2010, Stainless, natural gas, with steam, with trolley for 20 trays, adjustable timer and temperature controls, with two trolleys, 1Ph
used
Key data: 950 mm, 1 , 150 mm
- Combi grinding unit with calibration roller and sanding pad - Working width 950 mm - Sanding belt width max. 970 mm - Sanding belt length 1,700 mm - Workpiece thickness max. 150 mm - Feed speed 4 and 8 m/min - Motor power 7.5 kW - Feed motor 0.45/0.6 kW - Height adjustment 0.2 kW - Suction nozzle Ø 160 mm - Compressed air connection 6 bar - Air requirement approx. 10NL/min - Electrical connection: 380 V, 50 Hz, 20 A - Dimensions: approx. 1,775 x 1,570 x 1,830 mm - Weight approx. 1,000 kg Technical data subject to actual equipment
used
Working width: 950 mm; Working height: 140 mm; min. workpiece length: Height adjustment: electric; Workpiece thickness display: digital; Aggregates: 1; 1. Aggregate: Combi unit (roller - shoe) with insert-controlled sanding pad; Dust removal brush: no; Motor power: 7.5kW; Suction connection: 200mm; Machine length: 1800mm ; Machine width: 1800mm; Weight: 1000kg;
used
Combi with 11.1.018 Foil cutting & Wrapping machine Serial Number: 4395905 Weight: 1,1 tons Power: 46 kVA Length mm: 3000 Width mm: 2300 Height mm: 1800 Working height: 85 cm. Transport size L x W x H: 3,0 x 2,3 x 1,8 Min.-max. glass thickness: max 350 mm Min.-max glass size: max 1500 width Electric. Connection: 125A Documentation: Present Instructions: Present Electric diagram: Present Parts list: None Photos/film available: Photos available
used
Hebrock Euro 2000 Edges up to 5mm striped fabric Granule Hot Melt Glue Basin heated inlet ruler Roller capping pneumatic 0.2 - 3 mm Saw capping rigid 90° - combi milling unit flush + radius Chassis Dimensions 2800 x 1400 x 1400 mm Weight approx. 550 kg Machine is currently still in use ex location NET € 3.200,00
used
New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...
used
Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312 ...
used
The Enduro is a joint development of BÖWE SYSTEC and BÖWE BELL + HOWELL, combining proven technologies from both parts of the company: intelligent control and operation as well as modular input components on the one hand, and the proven gripping arm technology, on the other hand. With up to 11,000 envelopings per hour, the Enduro is used in the medium power segment. A wide range of applications, the convenient operation and easy accessibility of all modules are the highlights of the system. This covers the entire processing spectrum from classic invoicing to a wide range of advertising broadcasts. With the COMPACT, BÖWE SYSTEC offers a space-saving, solid yet versatile enveloping system in the performance class up to 7,200 envelons per hour, which can be tailored to a wide range of requirements. Thus, it is equally suitable as an entry-level model for daily post- ...
Continuous bearing Seam BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik Continuous shelves of different designs improve your intralogistics: FIFO principle: First In - First Out. The goods are removed in the order of put-away. In the area of perishable items such as pharmaceutical products or food essential. You can store large quantities in large shelves of great depth. This increases the utilization per sqm of storage space. You can stock many different items. Small quantities can be picked on the picking side. Loading side and picking side are separated. All processes are therefore fluid. The throughpass speed increases. The risk of accidents is reduced. In addition, you can receive packing tables and roller conveyors from us, which bring and remove the goods on both sides of the shelf. You can also receive an indi ...
used
We have a wide range of dosing devices in our warehouse and workshop. Several Yamato, Ishida, Combimat multi-head scales. Lots of Rovema, Webb snail dosages! Depending on your product, your wishes and possibilities, we can offer you a suitable dosage.
used
Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...
Spilling engine for combined heat and power plant Eight-cylinder spilling diesel engine Type 8SD4-127 Speed: 1,000 rpm Engine life: 1,360 hp Engine peak power 1,520 hp Built 1976/77 Operating hours approx. 3,000 hrs. Pictures can be emailed on request. The engine can be inspected by us after consultation. Price basis.
used
Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 ...
used
Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping
used
Cat. No. 11-3600-9 New V2A storage tank / combination tank / stacking tank with cooling jacket standing round on feet Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (base): 500 litres top (stack): 500 litres Base tank height (bottom): 1335 mm Stacking tank height (top): 1050 mm Total height: 2385 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905- ...
used
PT 8 is the ideal combination for TBA 8. We offer this item according with our Filling Lines. Alternatvely a PT 10 can also be used.
used
The TCAP 21 ReCap 2 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real functional and save closing solution.
used
MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...
used
automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2
used
Valve sack filling-machine, system air packer. With this machine you can fill all mealy, powdery, grainy and lumpy bulk articles - even difficult kind- with pour weights from 0,1 kg/l until 2 kg/ l and filling weights from 10 - 50 kg in paper and plastic valve sacks or combination of both materials. The machine is in a very good state. You can also get the entire system with all components you need.
used
The TCAP 47 Applicator is one of the high quality closing solutions.Additional with Filler and PT one of the most usual opening and closing Solutions. The TCAP 47 combines a high quality opening and closing solution at high standart and compfort in daily use.
new
With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...
he next development step of the basic opening solution in new shape and design for better usability. Better product flow is one of the key features. TCAP 21 ReCap 3 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real optimized functional and save closing solution. Option: Conveyors and Cardboard Packer with or without Wrap Around, Tray Shrink, etc...
used
Generators 16kVA Make/type: KR-16spezial Continuous average power (kVA): 16 Engine make/type: Kubota / D1105 EK2 Speed: 3000 rpm Speed control: Mechanical Generator brand / Type: Leroy Somer / 3748 J6/2 Voltage: 230/400 Volt, 50 Hz Control: Start/stop control panel with insulation monitoring and digital display Trailer: 2.5 to tandem car chassis with adjustable drawbar, overrun brakes, 4 piece parking jacks on each side Accessories: Device box with lockable handle Socket combination: 3 piece Sockets individually fused with machines 1 piece CEE Socket 16 amp. 5-pin machines protected Sockets lockable door Condition: used without guarantee, year of construction 2009, hours less than 250 hours
used
The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...
used
2 x Mectec UNUSED labellers: Type: PCU IV-ACC-B4 Year of production: 2012 The labelling dispensers are both fitted with nice printing devices for batch numbers and date etc. The Labelling dispensers are fitted on really nice Danish quality conveyors from CH SYSTEMS and are also UNUSED. Their are to each station installed an UNUSED wireless scanner from SICK. Each station is installed with an UNUSED Siemens Simatic control panel to manage the stations. All parts made by high quality brands. Label height: 120mm Conveyor width: 300mm Condition: good – UNUSED Dimensions: 1.700mm x 1.850mm & 1.900mm (LxW&H) Price per machine: 3.800 EUR Price combined: 7.000 EUR
used
? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...
used
MicroStep CNC guide machine AQUACUT 3001.15 W working area (3000mm x 1500 mm) high pressure pump: KMT Streamline Pro I 60 S, 6200 bar cutting up to 300mm only 4 000 operating hours Including osmosis water treatment system (12,000,- Euro) The AQUACUT is a robust and very practical CNC guide machine in portal construction, specially developed for continuous use in water jet cutting. The high dynamics of the system are overpowered by a low-set machine portal, digital DC servo motors with play-free transmission and practical, stainless linear guides in all three axes. In combination with an HD pump, the AQUACUT can be used to cut solid metals, hard rock, marble, armoured glass, ceramics, plastics, corrugated board, foams, as well as composite materials. assembly and commissioning on request. ; ready for immediate use
used
Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.
used
Equipment twin multi disc unwind station MTD-AWS-OWK 2 MTD AWS OWK Combination unwinding station 1 MTD-ZSF-LI-MSD Stack pacer LAT 1 LAT-2:1
used
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...